Open melyux opened 7 years ago
@erikarn , hm... should we do some periodic recalibration?
lol uhm, yes? :)
Are you telling me ath9k_htc is not doing any periodic calibration either in firmware or in the host side? I expected the host side is doing some stuff
-a
On 23 February 2017 at 22:11, Oleksij Rempel notifications@github.com wrote:
@erikarn https://github.com/erikarn , hm... should we do some periodic recalibration?
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/qca/open-ath9k-htc-firmware/issues/126#issuecomment-282213123, or mute the thread https://github.com/notifications/unsubscribe-auth/ABGl7c0XS12mZFrXa7IXfz9wEnwSgWVIks5rfnSkgaJpZM4MKxUF .
Not 100% sure if we are not doing. But is sounds like not, at least not for monitoring mode.
Yes, we should be, even in monitor mode.
-adrian
On 23 February 2017 at 22:30, Oleksij Rempel notifications@github.com wrote:
Not 100% sure if we are not doing. But is sounds like not, at least not for monitoring mode.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/qca/open-ath9k-htc-firmware/issues/126#issuecomment-282215629, or mute the thread https://github.com/notifications/unsubscribe-auth/ABGl7U6DUSWkOCuiXkwbYiwomVtITD7gks5rfnkYgaJpZM4MKxUF .
Interesting. I have had similar effects when being in monitor mode and having set fcsfail, i.e. frames with wrong checksum are also forwarded.
I could reproduce this by using my EZ-Wifibroadcast distribution, enabling fcsfail in monitor mode and then running it near sensitivity limit, so that there are something like 50% of wrong checksum frames being received. Then sometimes, it would just stop receiving packets, like you described, no more ifconfig packets/bytes updates.
Never tried to switch channel though when that happened. But I remember ifconfig down/up didn't work.
Without FCS Fail, this never happened, have been running these cards for several days in monitor mode constantly receiving ~700 1024 byte frames per second.
@melikyuksel can check if fcsfail ist set on you system?
@olerem The fcsfail
flag is not set. Just to check, I turned it on for both AR9271 cards, and both still eventually stopped within 30 minutes (lots of traffic at the moment). I turned it off, and both again stopped receiving packets again within the next hour.
I'm testing all this on fresh installations, and that flag is turned off by default when using both iw
and airmon-ng
with AR9271. Doesn't seem to make a difference for AR9271 like it does for EZ-Wifibroadcast.
Not sure what the default is, I explicitly set it with iw dev wlan0 set monitor none
. (Since I don't trust any "iw" or "iwconfig" outputs ...)
When I use iw dev wlan0 set monitor fcsfail
it sooner or later stops receiving frames when too much "garbage" frames come in.
Edit: I'm also using AR9271 cards, same as you, TPLink 722 and Alfa AWUSH036NHA.
I suspect that your cards would also stop receiving frames irregardless of fscfail
if you were in a crowded enough area. I might be wrong and you might already be though. I've noticed that the more packets the card is seeing, the sooner it fails. Turning on fcsfail
probably just increases the number of processed packets and leads to failure. In my case, I'm in such a crowded area that the card fails even without setting that flag on.
in this case, after monitoring is stalled, ifconfig will show you identical or similar amount of packages
I started monitore test: ifconfig wlxa0f3c1187553 up airmon-ng start wlxa0f3c1187553 6 tcpdump -ni mon0
Currently it is running one hour.
I left two running overnight as well (and they didn't stall, because they never stall overnight for some reason), and one just stalled at 5,138,158 RX packets (1.0 GiB), while the other stalled 5 hours later at 13,240,931 RX packets (2.3 GiB) so far. Is there some way to debug the situation when they stall? The ath9k_htc debug system itself show no difference for when it's running vs. when it's stalled.
I suspect that your cards would also stop receiving frames irregardless of fscfail if you were in a crowded enough area. I might be wrong and you might already be though.
I have tested it with detached antennas on the receiving wifi sticks (PCB Antennas on 722N also disabled) all they could hear was the packets coming from my transmitting wifi sticks (i.e. the videostream).
I've noticed that the more packets the card is seeing, the sooner it fails. Turning on fcsfail probably just increases the number of processed packets and leads to failure. In my case, I'm in such a crowded area that the card fails even without setting that flag on.
This was not the case with my tests, the transmitting stick sends something around 700 frames per second. When being near, lost frames or frames with failed FCS are almost zero, maybe one per 5 minutes or so. Then it runs for days. When going to the edge of reception, there are actually less frames being received as some are completely lost. I also noticed that this 'stall' happens quicker when there are more failed FCS frames coming in.
So my theory so far is, that it's not the actual number of frames that causes this (i.e. "overloading" the card when there are too many frames). I think it's that some special combination of garbage data causes the card to crash (some invalid combinations of whatever fields in the IEEE802.11 header, wrong length field that causes a read past where it shouldn't read, something like that).
This would explain that it can be reproduced quicker when there are more failed FCS frames, the probability that some frame contains "garbage the cards don't like" is higher.
However, this explanation of course doesn't line up with your results with fcs fail not enabled. Still, I feel quite confident that this does never happen with my EZ-Wifibroadcast distribution, maybe you could test it with that? This way we'd have completely the same setup, only variable left would be local circumstances like other wifi networks.
You can download it from here: https://github.com/bortek/EZ-WifiBroadcast/wiki, write it to an SDcard, edit wifibroadcast-1.txt on the boot partition (only FREQ=XXXX needs to be changed) put it in the Pi and let it run. SSH login is standard l:root p:raspberry. If you want local console access, switch over to tty10.
@rodizio1 Sure, I'll test it with EZ-Wifibroadcast. Do I just boot it up and put the interface in monitor mode, or do I need a second device like it says on the page?
No second device needed (as long as you don't want to transmit and receive live video), just write the image onto an SDcard and boot it up. Cards will automatically be in monitor mode on channel 13 after bootup. You can use up to three wifi sticks.
Hiya,
can you turn on NFCAL debugging and see what it's doing?
-adrian
@erikarn How is that done?
https://wireless.wiki.kernel.org/en/users/Drivers/ath9k/debug
compile ath9k/ath9k_htc with debugging, then enable the CALIBRATE bit as mentioned there, and check dmesg
it should be doing NF cal every 30 seconds or so.
-adrian
On 25 February 2017 at 13:22, melikyuksel notifications@github.com wrote:
@erikarn https://github.com/erikarn How is that done?
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/qca/open-ath9k-htc-firmware/issues/126#issuecomment-282513312, or mute the thread https://github.com/notifications/unsubscribe-auth/ABGl7fPtjhLtXHy1RktJgbZXahDqy7H0ks5rgJuDgaJpZM4MKxUF .
It doesn't do periodic noisefloor calibration. Only when changing channels.
Just got the EZ-Wifibroadcast image running for one card, and on the other card enabled the calibrate bit. No messages in dmesg even with the bit set though, and the packets haven't stalled on either yet as of 5 minutes in.
hiya,
ok, let's figure out how/why behind doing periodic calibrations. That sounds like a bit of a bug.
-adrian
On 25 February 2017 at 14:21, melikyuksel notifications@github.com wrote:
Just got the EZ-Wifibroadcast image running for one card, and on the other card enabled the calibrate bit. No messages in dmesg even with the bit set though, and the packets haven't stalled on either yet.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/qca/open-ath9k-htc-firmware/issues/126#issuecomment-282516762, or mute the thread https://github.com/notifications/unsubscribe-auth/ABGl7dGeR4cy4-myu2qMnOnDyNSPe6Noks5rgKlUgaJpZM4MKxUF .
So, the EZ-Wifibroadcast image card has stalled with the fcsfail
option untouched (which I assume means it's off). The card with calibrate bit enabled has not stalled yet as of 12 hours later (I expect it to stall within the next few hours as it becomes morning), and there are no messages in dmesg
at all about it. Are they really supposed to be in dmesg
, or maybe somewhere else?
they're supposed to be in 'dmesg'. type dmesg, don't look at console output.
If it only is logged during NIC startup then yeah, let's figure out how to fix that!
-adrian
On 26 February 2017 at 02:32, melikyuksel notifications@github.com wrote:
So, the EZ-Wifibroadcast image card has stalled with the fcsfail option untouched (which I assume means it's off). The card with calibrate bit enabled has not stalled yet as of 12 hours later, and there are no messages in dmesg at all about it. Are they really supposed to be in dmesg, or maybe somewhere else?
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/qca/open-ath9k-htc-firmware/issues/126#issuecomment-282546734, or mute the thread https://github.com/notifications/unsubscribe-auth/ABGl7RKQLCQpTNZKaGY6O3LCEXJTx2CGks5rgVTBgaJpZM4MKxUF .
I'm definitely not seeing any periodic messages in dmesg from any of the cards, but I don't think there's anything on startup either. @rodizio1 Do you know what the message is supposed to look like? It's strange because /sys/kernel/debug/ieee80211/phy1/ath9k_htc/debug
does contain 0x00000008
(the CALIBRATE bit) for both cards.
So, the EZ-Wifibroadcast image card has stalled with the fcsfail option untouched (which I assume means it's off).
Well, crap :) That makes my "bad content frames" theory invalid or we have two different issues here.
Yes, it doesn't forward fcsfail frames by default. I'll make something that allows to inject a lot of frames for testing to verify your "too much frames" theory.
This is what I get with debug=0xffffffff module parameter, NF calibration is done, but only on ifconfig up or channel change:
Note, the lines starting with "ATH:" (in uppercase) are printk's that I added myself to the source to see which function the driver calls.
[ 4.876551] ath9k_htc 1-1.5:1.0: ath9k_htc: HTC initialized with 33 credits
[ 4.890704] ath: phy1: serialize_regmode is 0
[ 4.890721] ath: phy1: UNDEFINED -> AWAKE
[ 4.898669] ath: phy1: Reading from EEPROM, not flash
[ 5.039843] ath: phy1: Read Magic = 0xA55A
[ 5.039857] ath: phy1: need_swap = False
[ 5.039874] ath: phy1: Eeprom VER: 14, REV: 13
[ 5.039880] ath: phy1: Initialize ANI
[ 5.039886] ATH: ath9k_ani_restart function
[ 5.039892] ath: phy1: Enable MIB counters
[ 5.041696] ath: phy1: Setup TX queue: 9
[ 5.041704] ATH: ath9k_hw_set_txq_props
[ 5.041710] ath: phy1: Set queue properties for: 9
[ 5.041717] ath: phy1: Setup TX queue: 8
[ 5.041721] ATH: ath9k_hw_set_txq_props
[ 5.041726] ath: phy1: Set queue properties for: 8
[ 5.041731] ath: phy1: Setup TX queue: 1
[ 5.041736] ATH: ath9k_hw_set_txq_props
[ 5.041740] ath: phy1: Set queue properties for: 1
[ 5.041747] ath: phy1: Setup TX queue: 0
[ 5.041750] ATH: ath9k_hw_set_txq_props
[ 5.041755] ath: phy1: Set queue properties for: 0
[ 5.041760] ath: phy1: Setup TX queue: 2
[ 5.041764] ATH: ath9k_hw_set_txq_props
[ 5.041769] ath: phy1: Set queue properties for: 2
[ 5.041774] ath: phy1: Setup TX queue: 3
[ 5.041779] ATH: ath9k_hw_set_txq_props
[ 5.041784] ath: phy1: Set queue properties for: 3
[ 5.176018] gpiomem-bcm2835 3f200000.gpiomem: gpiomem device opened.
[ 5.210360] systemd[1]: Started wbcconfig.
[ 5.211821] systemd[1]: Startup finished in 3.157s (kernel) + 2.053s (userspace) = 5.211s.
[ 5.322941] ath: phy1: TX streams 1, RX streams: 1
[ 5.323782] ath9k_htc 1-1.5:1.0: ath9k_htc: FW Version: 1.4
[ 5.323800] ath9k_htc 1-1.5:1.0: FW RMW support: On
[ 5.323809] ath: EEPROM regdomain: 0x809c
[ 5.323814] ath: EEPROM indicates we should expect a country code
[ 5.323821] ath: doing EEPROM country->regdmn map search
[ 5.323826] ath: country maps to regdmn code: 0x52
[ 5.323832] ath: Country alpha2 being used: CN
[ 5.323838] ath: Regpair used: 0x52
[ 5.431209] ath: phy1: WMI:1, BCN:2, CAB:3, UAPSD:4, MGMT:5, BE:6, BK:7, VI:8, VO:9
[ 5.431228] ieee80211 phy1: Atheros AR9271 Rev:1
[ 5.484051] cfg80211: Regulatory domain changed to country: CN
[ 5.484076] cfg80211: DFS Master region: unset
[ 5.484085] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 5.484096] cfg80211: (2302000 KHz - 2742000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 5.484104] cfg80211: (4910000 KHz - 5835000 KHz @ 160000 KHz), (N/A, 3000 mBm), (N/A)
[ 7.979701] cfg80211: Regulatory domain changed to country: DE
[ 7.979719] cfg80211: DFS Master region: unset
[ 7.979724] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 7.979734] cfg80211: (2302000 KHz - 2742000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 7.979742] cfg80211: (4910000 KHz - 5835000 KHz @ 160000 KHz), (N/A, 3000 mBm), (N/A)
[ 8.001992] ath9k_htc 1-1.5:1.0 c46e1f21bbf1: renamed from wlan0
[ 8.605963] ath: phy1: Starting driver with initial channel: 2312 MHz
[ 9.580319] ath: phy1: PDADC (0, 0): a280 04030201
[ 9.580336] ath: phy1: PDADC: Chain 0 | PDADC 0 Value 1 | PDADC 1 Value 2 | PDADC 2 Value 3 | PDADC 3 Value 4 |
[ 9.580344] ath: phy1: PDADC (0, 0): a284 08070605
[ 9.580352] ath: phy1: PDADC: Chain 0 | PDADC 4 Value 5 | PDADC 5 Value 6 | PDADC 6 Value 7 | PDADC 7 Value 8 |
[ 9.580359] ath: phy1: PDADC (0, 0): a288 0d0c0a09
[ 9.580367] ath: phy1: PDADC: Chain 0 | PDADC 8 Value 9 | PDADC 9 Value 10 | PDADC 10 Value 12 | PDADC 11 Value 13 |
[ 9.580374] ath: phy1: PDADC (0, 0): a28c 1311100e
[ 9.580382] ath: phy1: PDADC: Chain 0 | PDADC 12 Value 14 | PDADC 13 Value 16 | PDADC 14 Value 17 | PDADC 15 Value 19 |
[ 9.580389] ath: phy1: PDADC (0, 0): a290 18171614
[ 9.580399] ath: phy1: PDADC: Chain 0 | PDADC 16 Value 20 | PDADC 17 Value 22 | PDADC 18 Value 23 | PDADC 19 Value 24 |
[ 9.580405] ath: phy1: PDADC (0, 0): a294 23201c1a
[ 9.580414] ath: phy1: PDADC: Chain 0 | PDADC 20 Value 26 | PDADC 21 Value 28 | PDADC 22 Value 32 | PDADC 23 Value 35 |
[ 9.580420] ath: phy1: PDADC (0, 0): a298 302d2a26
[ 9.580428] ath: phy1: PDADC: Chain 0 | PDADC 24 Value 38 | PDADC 25 Value 42 | PDADC 26 Value 45 | PDADC 27 Value 48 |
[ 9.580435] ath: phy1: PDADC (0, 0): a29c 3e3a3734
[ 9.580443] ath: phy1: PDADC: Chain 0 | PDADC 28 Value 52 | PDADC 29 Value 55 | PDADC 30 Value 58 | PDADC 31 Value 62 |
[ 9.580450] ath: phy1: PDADC (0, 0): a2a0 57514a44
[ 9.580458] ath: phy1: PDADC: Chain 0 | PDADC 32 Value 68 | PDADC 33 Value 74 | PDADC 34 Value 81 | PDADC 35 Value 87 |
[ 9.580465] ath: phy1: PDADC (0, 0): a2a4 716b645e
[ 9.580474] ath: phy1: PDADC: Chain 0 | PDADC 36 Value 94 | PDADC 37 Value 100 | PDADC 38 Value 107 | PDADC 39 Value 113 |
[ 9.580480] ath: phy1: PDADC (0, 0): a2a8 8d867f78
[ 9.580489] ath: phy1: PDADC: Chain 0 | PDADC 40 Value 120 | PDADC 41 Value 127 | PDADC 42 Value 134 | PDADC 43 Value 141 |
[ 9.580496] ath: phy1: PDADC (0, 0): a2ac 2a262294
[ 9.580504] ath: phy1: PDADC: Chain 0 | PDADC 44 Value 148 | PDADC 45 Value 34 | PDADC 46 Value 38 | PDADC 47 Value 42 |
[ 9.580511] ath: phy1: PDADC (0, 0): a2b0 3a36322e
[ 9.580519] ath: phy1: PDADC: Chain 0 | PDADC 48 Value 46 | PDADC 49 Value 50 | PDADC 50 Value 54 | PDADC 51 Value 58 |
[ 9.580526] ath: phy1: PDADC (0, 0): a2b4 4e48423e
[ 9.580534] ath: phy1: PDADC: Chain 0 | PDADC 52 Value 62 | PDADC 53 Value 66 | PDADC 54 Value 72 | PDADC 55 Value 78 |
[ 9.580541] ath: phy1: PDADC (0, 0): a2b8 66605a54
[ 9.580549] ath: phy1: PDADC: Chain 0 | PDADC 56 Value 84 | PDADC 57 Value 90 | PDADC 58 Value 96 | PDADC 59 Value 102 |
[ 9.580556] ath: phy1: PDADC (0, 0): a2bc 847d756d
[ 9.580565] ath: phy1: PDADC: Chain 0 | PDADC 60 Value 109 | PDADC 61 Value 117 | PDADC 62 Value 125 | PDADC 63 Value 132 |
[ 9.580571] ath: phy1: PDADC (0, 0): a2c0 a59c948c
[ 9.580580] ath: phy1: PDADC: Chain 0 | PDADC 64 Value 140 | PDADC 65 Value 148 | PDADC 66 Value 156 | PDADC 67 Value 165 |
[ 9.580586] ath: phy1: PDADC (0, 0): a2c4 c9c0b7ae
[ 9.580595] ath: phy1: PDADC: Chain 0 | PDADC 68 Value 174 | PDADC 69 Value 183 | PDADC 70 Value 192 | PDADC 71 Value 201 |
[ 9.580601] ath: phy1: PDADC (0, 0): a2c8 dbdbdbd2
[ 9.580610] ath: phy1: PDADC: Chain 0 | PDADC 72 Value 210 | PDADC 73 Value 219 | PDADC 74 Value 219 | PDADC 75 Value 219 |
[ 9.580643] ath: phy1: PDADC (0, 0): a2cc dbdbdbdb
[ 9.580652] ath: phy1: PDADC: Chain 0 | PDADC 76 Value 219 | PDADC 77 Value 219 | PDADC 78 Value 219 | PDADC 79 Value 219 |
[ 9.580658] ath: phy1: PDADC (0, 0): a2d0 dbdbdbdb
[ 9.580667] ath: phy1: PDADC: Chain 0 | PDADC 80 Value 219 | PDADC 81 Value 219 | PDADC 82 Value 219 | PDADC 83 Value 219 |
[ 9.580673] ath: phy1: PDADC (0, 0): a2d4 dbdbdbdb
[ 9.580682] ath: phy1: PDADC: Chain 0 | PDADC 84 Value 219 | PDADC 85 Value 219 | PDADC 86 Value 219 | PDADC 87 Value 219 |
[ 9.580688] ath: phy1: PDADC (0, 0): a2d8 dbdbdbdb
[ 9.580697] ath: phy1: PDADC: Chain 0 | PDADC 88 Value 219 | PDADC 89 Value 219 | PDADC 90 Value 219 | PDADC 91 Value 219 |
[ 9.580703] ath: phy1: PDADC (0, 0): a2dc dbdbdbdb
[ 9.580712] ath: phy1: PDADC: Chain 0 | PDADC 92 Value 219 | PDADC 93 Value 219 | PDADC 94 Value 219 | PDADC 95 Value 219 |
[ 9.580719] ath: phy1: PDADC (0, 0): a2e0 dbdbdbdb
[ 9.580727] ath: phy1: PDADC: Chain 0 | PDADC 96 Value 219 | PDADC 97 Value 219 | PDADC 98 Value 219 | PDADC 99 Value 219 |
[ 9.580734] ath: phy1: PDADC (0, 0): a2e4 dbdbdbdb
[ 9.580742] ath: phy1: PDADC: Chain 0 | PDADC 100 Value 219 | PDADC 101 Value 219 | PDADC 102 Value 219 | PDADC 103 Value 219 |
[ 9.580749] ath: phy1: PDADC (0, 0): a2e8 dbdbdbdb
[ 9.580757] ath: phy1: PDADC: Chain 0 | PDADC 104 Value 219 | PDADC 105 Value 219 | PDADC 106 Value 219 | PDADC 107 Value 219 |
[ 9.580764] ath: phy1: PDADC (0, 0): a2ec dbdbdbdb
[ 9.580772] ath: phy1: PDADC: Chain 0 | PDADC 108 Value 219 | PDADC 109 Value 219 | PDADC 110 Value 219 | PDADC 111 Value 219 |
[ 9.580779] ath: phy1: PDADC (0, 0): a2f0 dbdbdbdb
[ 9.580788] ath: phy1: PDADC: Chain 0 | PDADC 112 Value 219 | PDADC 113 Value 219 | PDADC 114 Value 219 | PDADC 115 Value 219 |
[ 9.580794] ath: phy1: PDADC (0, 0): a2f4 dbdbdbdb
[ 9.580803] ath: phy1: PDADC: Chain 0 | PDADC 116 Value 219 | PDADC 117 Value 219 | PDADC 118 Value 219 | PDADC 119 Value 219 |
[ 9.580810] ath: phy1: PDADC (0, 0): a2f8 dbdbdbdb
[ 9.580818] ath: phy1: PDADC: Chain 0 | PDADC 120 Value 219 | PDADC 121 Value 219 | PDADC 122 Value 219 | PDADC 123 Value 219 |
[ 9.580825] ath: phy1: PDADC (0, 0): a2fc dbdbdbdb
[ 9.580833] ath: phy1: PDADC: Chain 0 | PDADC 124 Value 219 | PDADC 125 Value 219 | PDADC 126 Value 219 | PDADC 127 Value 219 |
[ 9.610438] ath: phy1: Reset TX queue: 0
[ 9.611308] ath: phy1: tx ok 0x0 err 0x0 desc 0x1 eol 0x1 urn 0x0
[ 9.612313] ath: phy1: Reset TX queue: 1
[ 9.613320] ath: phy1: tx ok 0x0 err 0x0 desc 0x3 eol 0x3 urn 0x0
[ 9.614313] ath: phy1: Reset TX queue: 2
[ 9.615323] ath: phy1: tx ok 0x0 err 0x0 desc 0x7 eol 0x7 urn 0x0
[ 9.617812] ath: phy1: Reset TX queue: 3
[ 9.618184] ath: phy1: tx ok 0x0 err 0x0 desc 0xf eol 0xf urn 0x0
[ 9.618543] ath: phy1: Reset TXQ, inactive queue: 4
[ 9.618549] ath: phy1: Reset TXQ, inactive queue: 5
[ 9.618555] ath: phy1: Reset TXQ, inactive queue: 6
[ 9.618560] ath: phy1: Reset TXQ, inactive queue: 7
[ 9.618565] ath: phy1: Reset TX queue: 8
[ 9.622326] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 9.623311] ath: phy1: Reset TX queue: 9
[ 9.626346] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 9.628349] ath: phy1: ver 320.1 opmode 2 chan 2312 Mhz
[ 9.636443] ath: phy1: ah->misc_mode 0x4
[ 9.700313] ath: phy1: enabling ADC Gain Calibration
[ 9.700328] ath: phy1: enabling ADC DC Calibration
[ 9.700333] ath: phy1: enabling IQ Calibration
[ 9.702306] ath: phy1: starting ADC Gain Calibration
[ 9.706329] ath: phy1: PDADC (0, 0): a280 04030201
[ 9.706345] ath: phy1: PDADC: Chain 0 | PDADC 0 Value 1 | PDADC 1 Value 2 | PDADC 2 Value 3 | PDADC 3 Value 4 |
[ 9.706352] ath: phy1: PDADC (0, 0): a284 08070605
[ 9.706360] ath: phy1: PDADC: Chain 0 | PDADC 4 Value 5 | PDADC 5 Value 6 | PDADC 6 Value 7 | PDADC 7 Value 8 |
[ 9.706367] ath: phy1: PDADC (0, 0): a288 0d0c0a09
[ 9.706375] ath: phy1: PDADC: Chain 0 | PDADC 8 Value 9 | PDADC 9 Value 10 | PDADC 10 Value 12 | PDADC 11 Value 13 |
[ 9.706382] ath: phy1: PDADC (0, 0): a28c 1311100e
[ 9.706390] ath: phy1: PDADC: Chain 0 | PDADC 12 Value 14 | PDADC 13 Value 16 | PDADC 14 Value 17 | PDADC 15 Value 19 |
[ 9.706397] ath: phy1: PDADC (0, 0): a290 18171614
[ 9.706405] ath: phy1: PDADC: Chain 0 | PDADC 16 Value 20 | PDADC 17 Value 22 | PDADC 18 Value 23 | PDADC 19 Value 24 |
[ 9.706412] ath: phy1: PDADC (0, 0): a294 23201c1a
[ 9.706420] ath: phy1: PDADC: Chain 0 | PDADC 20 Value 26 | PDADC 21 Value 28 | PDADC 22 Value 32 | PDADC 23 Value 35 |
[ 9.706428] ath: phy1: PDADC (0, 0): a298 302d2a26
[ 9.706437] ath: phy1: PDADC: Chain 0 | PDADC 24 Value 38 | PDADC 25 Value 42 | PDADC 26 Value 45 | PDADC 27 Value 48 |
[ 9.706443] ath: phy1: PDADC (0, 0): a29c 3e3a3734
[ 9.706452] ath: phy1: PDADC: Chain 0 | PDADC 28 Value 52 | PDADC 29 Value 55 | PDADC 30 Value 58 | PDADC 31 Value 62 |
[ 9.706458] ath: phy1: PDADC (0, 0): a2a0 57514a44
[ 9.706467] ath: phy1: PDADC: Chain 0 | PDADC 32 Value 68 | PDADC 33 Value 74 | PDADC 34 Value 81 | PDADC 35 Value 87 |
[ 9.706473] ath: phy1: PDADC (0, 0): a2a4 716b645e
[ 9.706482] ath: phy1: PDADC: Chain 0 | PDADC 36 Value 94 | PDADC 37 Value 100 | PDADC 38 Value 107 | PDADC 39 Value 113 |
[ 9.706488] ath: phy1: PDADC (0, 0): a2a8 8d867f78
[ 9.706497] ath: phy1: PDADC: Chain 0 | PDADC 40 Value 120 | PDADC 41 Value 127 | PDADC 42 Value 134 | PDADC 43 Value 141 |
[ 9.706503] ath: phy1: PDADC (0, 0): a2ac 2a262294
[ 9.706512] ath: phy1: PDADC: Chain 0 | PDADC 44 Value 148 | PDADC 45 Value 34 | PDADC 46 Value 38 | PDADC 47 Value 42 |
[ 9.706518] ath: phy1: PDADC (0, 0): a2b0 3a36322e
[ 9.706527] ath: phy1: PDADC: Chain 0 | PDADC 48 Value 46 | PDADC 49 Value 50 | PDADC 50 Value 54 | PDADC 51 Value 58 |
[ 9.706533] ath: phy1: PDADC (0, 0): a2b4 4e48423e
[ 9.706542] ath: phy1: PDADC: Chain 0 | PDADC 52 Value 62 | PDADC 53 Value 66 | PDADC 54 Value 72 | PDADC 55 Value 78 |
[ 9.706548] ath: phy1: PDADC (0, 0): a2b8 66605a54
[ 9.706557] ath: phy1: PDADC: Chain 0 | PDADC 56 Value 84 | PDADC 57 Value 90 | PDADC 58 Value 96 | PDADC 59 Value 102 |
[ 9.706565] ath: phy1: PDADC (0, 0): a2bc 847d756d
[ 9.706573] ath: phy1: PDADC: Chain 0 | PDADC 60 Value 109 | PDADC 61 Value 117 | PDADC 62 Value 125 | PDADC 63 Value 132 |
[ 9.706580] ath: phy1: PDADC (0, 0): a2c0 a59c948c
[ 9.706588] ath: phy1: PDADC: Chain 0 | PDADC 64 Value 140 | PDADC 65 Value 148 | PDADC 66 Value 156 | PDADC 67 Value 165 |
[ 9.706595] ath: phy1: PDADC (0, 0): a2c4 c9c0b7ae
[ 9.706603] ath: phy1: PDADC: Chain 0 | PDADC 68 Value 174 | PDADC 69 Value 183 | PDADC 70 Value 192 | PDADC 71 Value 201 |
[ 9.706610] ath: phy1: PDADC (0, 0): a2c8 dbdbdbd2
[ 9.706631] ath: phy1: PDADC: Chain 0 | PDADC 72 Value 210 | PDADC 73 Value 219 | PDADC 74 Value 219 | PDADC 75 Value 219 |
[ 9.706637] ath: phy1: PDADC (0, 0): a2cc dbdbdbdb
[ 9.706646] ath: phy1: PDADC: Chain 0 | PDADC 76 Value 219 | PDADC 77 Value 219 | PDADC 78 Value 219 | PDADC 79 Value 219 |
[ 9.706652] ath: phy1: PDADC (0, 0): a2d0 dbdbdbdb
[ 9.706661] ath: phy1: PDADC: Chain 0 | PDADC 80 Value 219 | PDADC 81 Value 219 | PDADC 82 Value 219 | PDADC 83 Value 219 |
[ 9.706667] ath: phy1: PDADC (0, 0): a2d4 dbdbdbdb
[ 9.706676] ath: phy1: PDADC: Chain 0 | PDADC 84 Value 219 | PDADC 85 Value 219 | PDADC 86 Value 219 | PDADC 87 Value 219 |
[ 9.706682] ath: phy1: PDADC (0, 0): a2d8 dbdbdbdb
[ 9.706691] ath: phy1: PDADC: Chain 0 | PDADC 88 Value 219 | PDADC 89 Value 219 | PDADC 90 Value 219 | PDADC 91 Value 219 |
[ 9.706698] ath: phy1: PDADC (0, 0): a2dc dbdbdbdb
[ 9.706707] ath: phy1: PDADC: Chain 0 | PDADC 92 Value 219 | PDADC 93 Value 219 | PDADC 94 Value 219 | PDADC 95 Value 219 |
[ 9.706713] ath: phy1: PDADC (0, 0): a2e0 dbdbdbdb
[ 9.706722] ath: phy1: PDADC: Chain 0 | PDADC 96 Value 219 | PDADC 97 Value 219 | PDADC 98 Value 219 | PDADC 99 Value 219 |
[ 9.706728] ath: phy1: PDADC (0, 0): a2e4 dbdbdbdb
[ 9.706737] ath: phy1: PDADC: Chain 0 | PDADC 100 Value 219 | PDADC 101 Value 219 | PDADC 102 Value 219 | PDADC 103 Value 219 |
[ 9.706743] ath: phy1: PDADC (0, 0): a2e8 dbdbdbdb
[ 9.706752] ath: phy1: PDADC: Chain 0 | PDADC 104 Value 219 | PDADC 105 Value 219 | PDADC 106 Value 219 | PDADC 107 Value 219 |
[ 9.706758] ath: phy1: PDADC (0, 0): a2ec dbdbdbdb
[ 9.706767] ath: phy1: PDADC: Chain 0 | PDADC 108 Value 219 | PDADC 109 Value 219 | PDADC 110 Value 219 | PDADC 111 Value 219 |
[ 9.706773] ath: phy1: PDADC (0, 0): a2f0 dbdbdbdb
[ 9.706782] ath: phy1: PDADC: Chain 0 | PDADC 112 Value 219 | PDADC 113 Value 219 | PDADC 114 Value 219 | PDADC 115 Value 219 |
[ 9.706789] ath: phy1: PDADC (0, 0): a2f4 dbdbdbdb
[ 9.706797] ath: phy1: PDADC: Chain 0 | PDADC 116 Value 219 | PDADC 117 Value 219 | PDADC 118 Value 219 | PDADC 119 Value 219 |
[ 9.706804] ath: phy1: PDADC (0, 0): a2f8 dbdbdbdb
[ 9.706813] ath: phy1: PDADC: Chain 0 | PDADC 120 Value 219 | PDADC 121 Value 219 | PDADC 122 Value 219 | PDADC 123 Value 219 |
[ 9.706820] ath: phy1: PDADC (0, 0): a2fc dbdbdbdb
[ 9.706828] ath: phy1: PDADC: Chain 0 | PDADC 124 Value 219 | PDADC 125 Value 219 | PDADC 126 Value 219 | PDADC 127 Value 219 |
[ 9.712311] ATH: ath9k_htc_opmode_init
[ 9.714307] ATH: ath9k_htc_calcrxfilter
[ 9.714319] ATH:ath9k_hw_setrxfilter
[ 9.718328] ath: phy1: Enable MIB counters
[ 9.721842] ath: phy1: Restore history: opmode 2 chan 2312 Mhz is_scanning=0 ofdm:3 cck:2
[ 9.721863] ath: phy1: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
[ 9.721873] ath: phy1: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
[ 9.721883] ATH: ath9k_ani_restart function
[ 9.721893] ATH: ath9k_ani_restart function after if (!ah->curchan)
[ 9.729442] ath: phy1: Added a station entry for VIF 0 (idx: 0)
[ 9.735330] ath: phy1: Attach a VIF of type: 2 at idx: 0
[ 9.735348] ath: phy1: ah->misc_mode 0x4
[ 9.744360] ATH: ath9k_htc_conf_tx function
[ 9.744391] ath: phy1: Configure tx [queue/hwq] [0/3], aifs: 2, cw_min: 15, cw_max: 1023, txop: 0
[ 9.744397] ATH: ath9k_hw_set_txq_props
[ 9.744403] ath: phy1: Set queue properties for: 3
[ 9.744411] ath: phy1: Reset TX queue: 3
[ 9.745335] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 9.746345] ATH: ath9k_htc_conf_tx function
[ 9.746378] ath: phy1: Configure tx [queue/hwq] [1/2], aifs: 2, cw_min: 15, cw_max: 1023, txop: 0
[ 9.746389] ATH: ath9k_hw_set_txq_props
[ 9.746401] ath: phy1: Set queue properties for: 2
[ 9.746412] ath: phy1: Reset TX queue: 2
[ 9.747344] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 9.748354] ATH: ath9k_htc_conf_tx function
[ 9.748377] ath: phy1: Configure tx [queue/hwq] [2/1], aifs: 2, cw_min: 15, cw_max: 1023, txop: 0
[ 9.748384] ATH: ath9k_hw_set_txq_props
[ 9.748390] ath: phy1: Set queue properties for: 1
[ 9.748397] ath: phy1: Reset TX queue: 1
[ 9.749350] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 9.750338] ATH: ath9k_htc_conf_tx function
[ 9.750357] ath: phy1: Configure tx [queue/hwq] [3/0], aifs: 2, cw_min: 15, cw_max: 1023, txop: 0
[ 9.750363] ATH: ath9k_hw_set_txq_props
[ 9.750369] ath: phy1: Set queue properties for: 0
[ 9.750376] ath: phy1: Reset TX queue: 0
[ 9.751329] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 9.752326] ath: phy1: Set channel: 2312 MHz
[ 9.755327] ath: phy1: (2312 MHz) -> (2312 MHz), HT: 0, HT40: 0 fastcc: 0
[ 9.758336] ath: phy1: NF calibrated [ctl] [chain 0] is -115
[ 9.758350] ath: phy1: NF[0] (-115) > MAX (-116), correcting to MAX
[ 9.806347] ath: phy1: PDADC (0, 0): a280 04030201
[ 9.806363] ath: phy1: PDADC: Chain 0 | PDADC 0 Value 1 | PDADC 1 Value 2 | PDADC 2 Value 3 | PDADC 3 Value 4 |
[ 9.806370] ath: phy1: PDADC (0, 0): a284 08070605
[ 9.806378] ath: phy1: PDADC: Chain 0 | PDADC 4 Value 5 | PDADC 5 Value 6 | PDADC 6 Value 7 | PDADC 7 Value 8 |
[ 9.806385] ath: phy1: PDADC (0, 0): a288 0d0c0a09
[ 9.806393] ath: phy1: PDADC: Chain 0 | PDADC 8 Value 9 | PDADC 9 Value 10 | PDADC 10 Value 12 | PDADC 11 Value 13 |
[ 9.806400] ath: phy1: PDADC (0, 0): a28c 1311100e
[ 9.806409] ath: phy1: PDADC: Chain 0 | PDADC 12 Value 14 | PDADC 13 Value 16 | PDADC 14 Value 17 | PDADC 15 Value 19 |
[ 9.806415] ath: phy1: PDADC (0, 0): a290 18171614
[ 9.806434] ath: phy1: PDADC: Chain 0 | PDADC 16 Value 20 | PDADC 17 Value 22 | PDADC 18 Value 23 | PDADC 19 Value 24 |
[ 9.806442] ath: phy1: PDADC (0, 0): a294 23201c1a
[ 9.806450] ath: phy1: PDADC: Chain 0 | PDADC 20 Value 26 | PDADC 21 Value 28 | PDADC 22 Value 32 | PDADC 23 Value 35 |
[ 9.806458] ath: phy1: PDADC (0, 0): a298 302d2a26
[ 9.806466] ath: phy1: PDADC: Chain 0 | PDADC 24 Value 38 | PDADC 25 Value 42 | PDADC 26 Value 45 | PDADC 27 Value 48 |
[ 9.806472] ath: phy1: PDADC (0, 0): a29c 3e3a3734
[ 9.806481] ath: phy1: PDADC: Chain 0 | PDADC 28 Value 52 | PDADC 29 Value 55 | PDADC 30 Value 58 | PDADC 31 Value 62 |
[ 9.806487] ath: phy1: PDADC (0, 0): a2a0 57514a44
[ 9.806496] ath: phy1: PDADC: Chain 0 | PDADC 32 Value 68 | PDADC 33 Value 74 | PDADC 34 Value 81 | PDADC 35 Value 87 |
[ 9.806502] ath: phy1: PDADC (0, 0): a2a4 716b645e
[ 9.806511] ath: phy1: PDADC: Chain 0 | PDADC 36 Value 94 | PDADC 37 Value 100 | PDADC 38 Value 107 | PDADC 39 Value 113 |
[ 9.806518] ath: phy1: PDADC (0, 0): a2a8 8d867f78
[ 9.806526] ath: phy1: PDADC: Chain 0 | PDADC 40 Value 120 | PDADC 41 Value 127 | PDADC 42 Value 134 | PDADC 43 Value 141 |
[ 9.806533] ath: phy1: PDADC (0, 0): a2ac 2a262294
[ 9.806541] ath: phy1: PDADC: Chain 0 | PDADC 44 Value 148 | PDADC 45 Value 34 | PDADC 46 Value 38 | PDADC 47 Value 42 |
[ 9.806555] ath: phy1: PDADC (0, 0): a2b0 3a36322e
[ 9.806564] ath: phy1: PDADC: Chain 0 | PDADC 48 Value 46 | PDADC 49 Value 50 | PDADC 50 Value 54 | PDADC 51 Value 58 |
[ 9.806570] ath: phy1: PDADC (0, 0): a2b4 4e48423e
[ 9.806579] ath: phy1: PDADC: Chain 0 | PDADC 52 Value 62 | PDADC 53 Value 66 | PDADC 54 Value 72 | PDADC 55 Value 78 |
[ 9.806585] ath: phy1: PDADC (0, 0): a2b8 66605a54
[ 9.806593] ath: phy1: PDADC: Chain 0 | PDADC 56 Value 84 | PDADC 57 Value 90 | PDADC 58 Value 96 | PDADC 59 Value 102 |
[ 9.806600] ath: phy1: PDADC (0, 0): a2bc 847d756d
[ 9.806609] ath: phy1: PDADC: Chain 0 | PDADC 60 Value 109 | PDADC 61 Value 117 | PDADC 62 Value 125 | PDADC 63 Value 132 |
[ 9.806630] ath: phy1: PDADC (0, 0): a2c0 a59c948c
[ 9.806639] ath: phy1: PDADC: Chain 0 | PDADC 64 Value 140 | PDADC 65 Value 148 | PDADC 66 Value 156 | PDADC 67 Value 165 |
[ 9.806646] ath: phy1: PDADC (0, 0): a2c4 c9c0b7ae
[ 9.806655] ath: phy1: PDADC: Chain 0 | PDADC 68 Value 174 | PDADC 69 Value 183 | PDADC 70 Value 192 | PDADC 71 Value 201 |
[ 9.806661] ath: phy1: PDADC (0, 0): a2c8 dbdbdbd2
[ 9.806670] ath: phy1: PDADC: Chain 0 | PDADC 72 Value 210 | PDADC 73 Value 219 | PDADC 74 Value 219 | PDADC 75 Value 219 |
[ 9.806685] ath: phy1: PDADC (0, 0): a2cc dbdbdbdb
[ 9.806693] ath: phy1: PDADC: Chain 0 | PDADC 76 Value 219 | PDADC 77 Value 219 | PDADC 78 Value 219 | PDADC 79 Value 219 |
[ 9.806700] ath: phy1: PDADC (0, 0): a2d0 dbdbdbdb
[ 9.806708] ath: phy1: PDADC: Chain 0 | PDADC 80 Value 219 | PDADC 81 Value 219 | PDADC 82 Value 219 | PDADC 83 Value 219 |
[ 9.806715] ath: phy1: PDADC (0, 0): a2d4 dbdbdbdb
[ 9.806724] ath: phy1: PDADC: Chain 0 | PDADC 84 Value 219 | PDADC 85 Value 219 | PDADC 86 Value 219 | PDADC 87 Value 219 |
[ 9.806731] ath: phy1: PDADC (0, 0): a2d8 dbdbdbdb
[ 9.806739] ath: phy1: PDADC: Chain 0 | PDADC 88 Value 219 | PDADC 89 Value 219 | PDADC 90 Value 219 | PDADC 91 Value 219 |
[ 9.806746] ath: phy1: PDADC (0, 0): a2dc dbdbdbdb
[ 9.806754] ath: phy1: PDADC: Chain 0 | PDADC 92 Value 219 | PDADC 93 Value 219 | PDADC 94 Value 219 | PDADC 95 Value 219 |
[ 9.806761] ath: phy1: PDADC (0, 0): a2e0 dbdbdbdb
[ 9.806770] ath: phy1: PDADC: Chain 0 | PDADC 96 Value 219 | PDADC 97 Value 219 | PDADC 98 Value 219 | PDADC 99 Value 219 |
[ 9.806776] ath: phy1: PDADC (0, 0): a2e4 dbdbdbdb
[ 9.806785] ath: phy1: PDADC: Chain 0 | PDADC 100 Value 219 | PDADC 101 Value 219 | PDADC 102 Value 219 | PDADC 103 Value 219 |
[ 9.806791] ath: phy1: PDADC (0, 0): a2e8 dbdbdbdb
[ 9.806808] ath: phy1: PDADC: Chain 0 | PDADC 104 Value 219 | PDADC 105 Value 219 | PDADC 106 Value 219 | PDADC 107 Value 219 |
[ 9.806814] ath: phy1: PDADC (0, 0): a2ec dbdbdbdb
[ 9.806823] ath: phy1: PDADC: Chain 0 | PDADC 108 Value 219 | PDADC 109 Value 219 | PDADC 110 Value 219 | PDADC 111 Value 219 |
[ 9.806830] ath: phy1: PDADC (0, 0): a2f0 dbdbdbdb
[ 9.806838] ath: phy1: PDADC: Chain 0 | PDADC 112 Value 219 | PDADC 113 Value 219 | PDADC 114 Value 219 | PDADC 115 Value 219 |
[ 9.806845] ath: phy1: PDADC (0, 0): a2f4 dbdbdbdb
[ 9.806853] ath: phy1: PDADC: Chain 0 | PDADC 116 Value 219 | PDADC 117 Value 219 | PDADC 118 Value 219 | PDADC 119 Value 219 |
[ 9.806860] ath: phy1: PDADC (0, 0): a2f8 dbdbdbdb
[ 9.806868] ath: phy1: PDADC: Chain 0 | PDADC 120 Value 219 | PDADC 121 Value 219 | PDADC 122 Value 219 | PDADC 123 Value 219 |
[ 9.806876] ath: phy1: PDADC (0, 0): a2fc dbdbdbdb
[ 9.806884] ath: phy1: PDADC: Chain 0 | PDADC 124 Value 219 | PDADC 125 Value 219 | PDADC 126 Value 219 | PDADC 127 Value 219 |
[ 9.834464] ath: phy1: Reset TX queue: 0
[ 9.835326] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 9.836326] ath: phy1: Reset TX queue: 1
[ 9.837332] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 9.838340] ath: phy1: Reset TX queue: 2
[ 9.839335] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 9.840335] ath: phy1: Reset TX queue: 3
[ 9.841332] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 9.842330] ath: phy1: Reset TXQ, inactive queue: 4
[ 9.842337] ath: phy1: Reset TXQ, inactive queue: 5
[ 9.842343] ath: phy1: Reset TXQ, inactive queue: 6
[ 9.842348] ath: phy1: Reset TXQ, inactive queue: 7
[ 9.842354] ath: phy1: Reset TX queue: 8
[ 9.846347] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 9.847330] ath: phy1: Reset TX queue: 9
[ 9.850384] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 9.852381] ath: phy1: ver 320.1 opmode 2 chan 2312 Mhz
[ 9.860464] ath: phy1: ah->misc_mode 0x4
[ 9.926352] ath: phy1: enabling ADC Gain Calibration
[ 9.926369] ath: phy1: enabling ADC DC Calibration
[ 9.926374] ath: phy1: enabling IQ Calibration
[ 9.928341] ath: phy1: starting ADC Gain Calibration
[ 9.933339] ATH: ath9k_htc_opmode_init
[ 9.935332] ATH: ath9k_htc_calcrxfilter
[ 9.935342] ATH:ath9k_hw_setrxfilter
[ 9.939339] ath: phy1: Enable MIB counters
[ 9.941347] ath: phy1: Restore history: opmode 2 chan 2312 Mhz is_scanning=0 ofdm:3 cck:2
[ 9.941358] ath: phy1: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
[ 9.941366] ath: phy1: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
[ 9.941371] ATH: ath9k_ani_restart function
[ 9.941375] ATH: ath9k_ani_restart function after if (!ah->curchan)
[ 9.947359] ath: phy1: PDADC (0, 0): a280 04030201
[ 9.947375] ath: phy1: PDADC: Chain 0 | PDADC 0 Value 1 | PDADC 1 Value 2 | PDADC 2 Value 3 | PDADC 3 Value 4 |
[ 9.947382] ath: phy1: PDADC (0, 0): a284 08070605
[ 9.947391] ath: phy1: PDADC: Chain 0 | PDADC 4 Value 5 | PDADC 5 Value 6 | PDADC 6 Value 7 | PDADC 7 Value 8 |
[ 9.947398] ath: phy1: PDADC (0, 0): a288 0d0c0a09
[ 9.947406] ath: phy1: PDADC: Chain 0 | PDADC 8 Value 9 | PDADC 9 Value 10 | PDADC 10 Value 12 | PDADC 11 Value 13 |
[ 9.947413] ath: phy1: PDADC (0, 0): a28c 1311100e
[ 9.947421] ath: phy1: PDADC: Chain 0 | PDADC 12 Value 14 | PDADC 13 Value 16 | PDADC 14 Value 17 | PDADC 15 Value 19 |
[ 9.947428] ath: phy1: PDADC (0, 0): a290 18171614
[ 9.947436] ath: phy1: PDADC: Chain 0 | PDADC 16 Value 20 | PDADC 17 Value 22 | PDADC 18 Value 23 | PDADC 19 Value 24 |
[ 9.947443] ath: phy1: PDADC (0, 0): a294 23201c1a
[ 9.947451] ath: phy1: PDADC: Chain 0 | PDADC 20 Value 26 | PDADC 21 Value 28 | PDADC 22 Value 32 | PDADC 23 Value 35 |
[ 9.947458] ath: phy1: PDADC (0, 0): a298 302d2a26
[ 9.947466] ath: phy1: PDADC: Chain 0 | PDADC 24 Value 38 | PDADC 25 Value 42 | PDADC 26 Value 45 | PDADC 27 Value 48 |
[ 9.947473] ath: phy1: PDADC (0, 0): a29c 3e3a3734
[ 9.947481] ath: phy1: PDADC: Chain 0 | PDADC 28 Value 52 | PDADC 29 Value 55 | PDADC 30 Value 58 | PDADC 31 Value 62 |
[ 9.947487] ath: phy1: PDADC (0, 0): a2a0 57514a44
[ 9.947496] ath: phy1: PDADC: Chain 0 | PDADC 32 Value 68 | PDADC 33 Value 74 | PDADC 34 Value 81 | PDADC 35 Value 87 |
[ 9.947502] ath: phy1: PDADC (0, 0): a2a4 716b645e
[ 9.947511] ath: phy1: PDADC: Chain 0 | PDADC 36 Value 94 | PDADC 37 Value 100 | PDADC 38 Value 107 | PDADC 39 Value 113 |
[ 9.947517] ath: phy1: PDADC (0, 0): a2a8 8d867f78
[ 9.947526] ath: phy1: PDADC: Chain 0 | PDADC 40 Value 120 | PDADC 41 Value 127 | PDADC 42 Value 134 | PDADC 43 Value 141 |
[ 9.947533] ath: phy1: PDADC (0, 0): a2ac 2a262294
[ 9.947541] ath: phy1: PDADC: Chain 0 | PDADC 44 Value 148 | PDADC 45 Value 34 | PDADC 46 Value 38 | PDADC 47 Value 42 |
[ 9.947548] ath: phy1: PDADC (0, 0): a2b0 3a36322e
[ 9.947556] ath: phy1: PDADC: Chain 0 | PDADC 48 Value 46 | PDADC 49 Value 50 | PDADC 50 Value 54 | PDADC 51 Value 58 |
[ 9.947563] ath: phy1: PDADC (0, 0): a2b4 4e48423e
[ 9.947571] ath: phy1: PDADC: Chain 0 | PDADC 52 Value 62 | PDADC 53 Value 66 | PDADC 54 Value 72 | PDADC 55 Value 78 |
[ 9.947578] ath: phy1: PDADC (0, 0): a2b8 66605a54
[ 9.947586] ath: phy1: PDADC: Chain 0 | PDADC 56 Value 84 | PDADC 57 Value 90 | PDADC 58 Value 96 | PDADC 59 Value 102 |
[ 9.947593] ath: phy1: PDADC (0, 0): a2bc 847d756d
[ 9.947601] ath: phy1: PDADC: Chain 0 | PDADC 60 Value 109 | PDADC 61 Value 117 | PDADC 62 Value 125 | PDADC 63 Value 132 |
[ 9.947608] ath: phy1: PDADC (0, 0): a2c0 a59c948c
[ 9.947637] ath: phy1: PDADC: Chain 0 | PDADC 64 Value 140 | PDADC 65 Value 148 | PDADC 66 Value 156 | PDADC 67 Value 165 |
[ 9.947644] ath: phy1: PDADC (0, 0): a2c4 c9c0b7ae
[ 9.947653] ath: phy1: PDADC: Chain 0 | PDADC 68 Value 174 | PDADC 69 Value 183 | PDADC 70 Value 192 | PDADC 71 Value 201 |
[ 9.947660] ath: phy1: PDADC (0, 0): a2c8 dbdbdbd2
[ 9.947668] ath: phy1: PDADC: Chain 0 | PDADC 72 Value 210 | PDADC 73 Value 219 | PDADC 74 Value 219 | PDADC 75 Value 219 |
[ 9.947675] ath: phy1: PDADC (0, 0): a2cc dbdbdbdb
[ 9.947683] ath: phy1: PDADC: Chain 0 | PDADC 76 Value 219 | PDADC 77 Value 219 | PDADC 78 Value 219 | PDADC 79 Value 219 |
[ 9.947690] ath: phy1: PDADC (0, 0): a2d0 dbdbdbdb
[ 9.947698] ath: phy1: PDADC: Chain 0 | PDADC 80 Value 219 | PDADC 81 Value 219 | PDADC 82 Value 219 | PDADC 83 Value 219 |
[ 9.947705] ath: phy1: PDADC (0, 0): a2d4 dbdbdbdb
[ 9.947713] ath: phy1: PDADC: Chain 0 | PDADC 84 Value 219 | PDADC 85 Value 219 | PDADC 86 Value 219 | PDADC 87 Value 219 |
[ 9.947720] ath: phy1: PDADC (0, 0): a2d8 dbdbdbdb
[ 9.947728] ath: phy1: PDADC: Chain 0 | PDADC 88 Value 219 | PDADC 89 Value 219 | PDADC 90 Value 219 | PDADC 91 Value 219 |
[ 9.947735] ath: phy1: PDADC (0, 0): a2dc dbdbdbdb
[ 9.947744] ath: phy1: PDADC: Chain 0 | PDADC 92 Value 219 | PDADC 93 Value 219 | PDADC 94 Value 219 | PDADC 95 Value 219 |
[ 9.947750] ath: phy1: PDADC (0, 0): a2e0 dbdbdbdb
[ 9.947759] ath: phy1: PDADC: Chain 0 | PDADC 96 Value 219 | PDADC 97 Value 219 | PDADC 98 Value 219 | PDADC 99 Value 219 |
[ 9.947765] ath: phy1: PDADC (0, 0): a2e4 dbdbdbdb
[ 9.947774] ath: phy1: PDADC: Chain 0 | PDADC 100 Value 219 | PDADC 101 Value 219 | PDADC 102 Value 219 | PDADC 103 Value 219 |
[ 9.947780] ath: phy1: PDADC (0, 0): a2e8 dbdbdbdb
[ 9.947789] ath: phy1: PDADC: Chain 0 | PDADC 104 Value 219 | PDADC 105 Value 219 | PDADC 106 Value 219 | PDADC 107 Value 219 |
[ 9.947795] ath: phy1: PDADC (0, 0): a2ec dbdbdbdb
[ 9.947804] ath: phy1: PDADC: Chain 0 | PDADC 108 Value 219 | PDADC 109 Value 219 | PDADC 110 Value 219 | PDADC 111 Value 219 |
[ 9.947810] ath: phy1: PDADC (0, 0): a2f0 dbdbdbdb
[ 9.947819] ath: phy1: PDADC: Chain 0 | PDADC 112 Value 219 | PDADC 113 Value 219 | PDADC 114 Value 219 | PDADC 115 Value 219 |
[ 9.947825] ath: phy1: PDADC (0, 0): a2f4 dbdbdbdb
[ 9.947834] ath: phy1: PDADC: Chain 0 | PDADC 116 Value 219 | PDADC 117 Value 219 | PDADC 118 Value 219 | PDADC 119 Value 219 |
[ 9.947840] ath: phy1: PDADC (0, 0): a2f8 dbdbdbdb
[ 9.947849] ath: phy1: PDADC: Chain 0 | PDADC 120 Value 219 | PDADC 121 Value 219 | PDADC 122 Value 219 | PDADC 123 Value 219 |
[ 9.947856] ath: phy1: PDADC (0, 0): a2fc dbdbdbdb
[ 9.947865] ath: phy1: PDADC: Chain 0 | PDADC 124 Value 219 | PDADC 125 Value 219 | PDADC 126 Value 219 | PDADC 127 Value 219 |
[ 9.954344] ath: phy1: AWAKE -> FULL-SLEEP
[ 9.958789] ATH: ath9k_htc_configure_filter
[ 9.958815] ath: phy1: FULL-SLEEP -> AWAKE
[ 9.963339] ATH: ath9k_htc_calcrxfilter
[ 9.963354] ATH:ath9k_hw_setrxfilter
[ 9.965349] ath: phy1: Set HW RX filter: 0x217
[ 9.970344] ath: phy1: AWAKE -> FULL-SLEEP
[ 10.168380] ath: phy1: Set bitrate masks: 0x80, 0x0
[ 10.376938] ATH: ath9k_htc_configure_filter
[ 10.376955] ath: phy1: FULL-SLEEP -> AWAKE
[ 10.381394] ATH: ath9k_htc_calcrxfilter
[ 10.381403] ATH:ath9k_hw_setrxfilter
[ 10.383408] ath: phy1: Set HW RX filter: 0x217
[ 10.388402] ath: phy1: AWAKE -> FULL-SLEEP
[ 10.391404] ath: phy1: FULL-SLEEP -> AWAKE
[ 10.399185] ath: phy1: Removed a station entry for VIF 0 (idx: 0)
[ 10.404407] ath: phy1: Detach Interface at idx: 0
[ 10.409401] ath: phy1: AWAKE -> FULL-SLEEP
[ 10.413415] ath: phy1: FULL-SLEEP -> AWAKE
[ 10.443409] ath: phy1: AWAKE -> FULL-SLEEP
[ 10.446404] ath: phy1: Driver halt
[ 10.865711] ath: phy1: Starting driver with initial channel: 2312 MHz
[ 10.865725] ath: phy1: FULL-SLEEP -> AWAKE
[ 10.917481] ath: phy1: PDADC (0, 0): a280 04030201
[ 10.917496] ath: phy1: PDADC: Chain 0 | PDADC 0 Value 1 | PDADC 1 Value 2 | PDADC 2 Value 3 | PDADC 3 Value 4 |
[ 10.917504] ath: phy1: PDADC (0, 0): a284 08070605
[ 10.917512] ath: phy1: PDADC: Chain 0 | PDADC 4 Value 5 | PDADC 5 Value 6 | PDADC 6 Value 7 | PDADC 7 Value 8 |
[ 10.917519] ath: phy1: PDADC (0, 0): a288 0d0c0a09
[ 10.917527] ath: phy1: PDADC: Chain 0 | PDADC 8 Value 9 | PDADC 9 Value 10 | PDADC 10 Value 12 | PDADC 11 Value 13 |
[ 10.917534] ath: phy1: PDADC (0, 0): a28c 1311100e
[ 10.917542] ath: phy1: PDADC: Chain 0 | PDADC 12 Value 14 | PDADC 13 Value 16 | PDADC 14 Value 17 | PDADC 15 Value 19 |
[ 10.917549] ath: phy1: PDADC (0, 0): a290 18171614
[ 10.917557] ath: phy1: PDADC: Chain 0 | PDADC 16 Value 20 | PDADC 17 Value 22 | PDADC 18 Value 23 | PDADC 19 Value 24 |
[ 10.917564] ath: phy1: PDADC (0, 0): a294 23201c1a
[ 10.917572] ath: phy1: PDADC: Chain 0 | PDADC 20 Value 26 | PDADC 21 Value 28 | PDADC 22 Value 32 | PDADC 23 Value 35 |
[ 10.917579] ath: phy1: PDADC (0, 0): a298 302d2a26
[ 10.917587] ath: phy1: PDADC: Chain 0 | PDADC 24 Value 38 | PDADC 25 Value 42 | PDADC 26 Value 45 | PDADC 27 Value 48 |
[ 10.917594] ath: phy1: PDADC (0, 0): a29c 3e3a3734
[ 10.917602] ath: phy1: PDADC: Chain 0 | PDADC 28 Value 52 | PDADC 29 Value 55 | PDADC 30 Value 58 | PDADC 31 Value 62 |
[ 10.917609] ath: phy1: PDADC (0, 0): a2a0 57514a44
[ 10.917626] ath: phy1: PDADC: Chain 0 | PDADC 32 Value 68 | PDADC 33 Value 74 | PDADC 34 Value 81 | PDADC 35 Value 87 |
[ 10.917633] ath: phy1: PDADC (0, 0): a2a4 716b645e
[ 10.917643] ath: phy1: PDADC: Chain 0 | PDADC 36 Value 94 | PDADC 37 Value 100 | PDADC 38 Value 107 | PDADC 39 Value 113 |
[ 10.917649] ath: phy1: PDADC (0, 0): a2a8 8d867f78
[ 10.917658] ath: phy1: PDADC: Chain 0 | PDADC 40 Value 120 | PDADC 41 Value 127 | PDADC 42 Value 134 | PDADC 43 Value 141 |
[ 10.917664] ath: phy1: PDADC (0, 0): a2ac 2a262294
[ 10.917673] ath: phy1: PDADC: Chain 0 | PDADC 44 Value 148 | PDADC 45 Value 34 | PDADC 46 Value 38 | PDADC 47 Value 42 |
[ 10.917680] ath: phy1: PDADC (0, 0): a2b0 3a36322e
[ 10.917688] ath: phy1: PDADC: Chain 0 | PDADC 48 Value 46 | PDADC 49 Value 50 | PDADC 50 Value 54 | PDADC 51 Value 58 |
[ 10.917695] ath: phy1: PDADC (0, 0): a2b4 4e48423e
[ 10.917703] ath: phy1: PDADC: Chain 0 | PDADC 52 Value 62 | PDADC 53 Value 66 | PDADC 54 Value 72 | PDADC 55 Value 78 |
[ 10.917710] ath: phy1: PDADC (0, 0): a2b8 66605a54
[ 10.917718] ath: phy1: PDADC: Chain 0 | PDADC 56 Value 84 | PDADC 57 Value 90 | PDADC 58 Value 96 | PDADC 59 Value 102 |
[ 10.917725] ath: phy1: PDADC (0, 0): a2bc 847d756d
[ 10.917733] ath: phy1: PDADC: Chain 0 | PDADC 60 Value 109 | PDADC 61 Value 117 | PDADC 62 Value 125 | PDADC 63 Value 132 |
[ 10.917740] ath: phy1: PDADC (0, 0): a2c0 a59c948c
[ 10.917748] ath: phy1: PDADC: Chain 0 | PDADC 64 Value 140 | PDADC 65 Value 148 | PDADC 66 Value 156 | PDADC 67 Value 165 |
[ 10.917755] ath: phy1: PDADC (0, 0): a2c4 c9c0b7ae
[ 10.917763] ath: phy1: PDADC: Chain 0 | PDADC 68 Value 174 | PDADC 69 Value 183 | PDADC 70 Value 192 | PDADC 71 Value 201 |
[ 10.917770] ath: phy1: PDADC (0, 0): a2c8 dbdbdbd2
[ 10.917779] ath: phy1: PDADC: Chain 0 | PDADC 72 Value 210 | PDADC 73 Value 219 | PDADC 74 Value 219 | PDADC 75 Value 219 |
[ 10.917785] ath: phy1: PDADC (0, 0): a2cc dbdbdbdb
[ 10.917794] ath: phy1: PDADC: Chain 0 | PDADC 76 Value 219 | PDADC 77 Value 219 | PDADC 78 Value 219 | PDADC 79 Value 219 |
[ 10.917801] ath: phy1: PDADC (0, 0): a2d0 dbdbdbdb
[ 10.917809] ath: phy1: PDADC: Chain 0 | PDADC 80 Value 219 | PDADC 81 Value 219 | PDADC 82 Value 219 | PDADC 83 Value 219 |
[ 10.917816] ath: phy1: PDADC (0, 0): a2d4 dbdbdbdb
[ 10.917824] ath: phy1: PDADC: Chain 0 | PDADC 84 Value 219 | PDADC 85 Value 219 | PDADC 86 Value 219 | PDADC 87 Value 219 |
[ 10.917831] ath: phy1: PDADC (0, 0): a2d8 dbdbdbdb
[ 10.917839] ath: phy1: PDADC: Chain 0 | PDADC 88 Value 219 | PDADC 89 Value 219 | PDADC 90 Value 219 | PDADC 91 Value 219 |
[ 10.917846] ath: phy1: PDADC (0, 0): a2dc dbdbdbdb
[ 10.917855] ath: phy1: PDADC: Chain 0 | PDADC 92 Value 219 | PDADC 93 Value 219 | PDADC 94 Value 219 | PDADC 95 Value 219 |
[ 10.917861] ath: phy1: PDADC (0, 0): a2e0 dbdbdbdb
[ 10.917870] ath: phy1: PDADC: Chain 0 | PDADC 96 Value 219 | PDADC 97 Value 219 | PDADC 98 Value 219 | PDADC 99 Value 219 |
[ 10.917876] ath: phy1: PDADC (0, 0): a2e4 dbdbdbdb
[ 10.917885] ath: phy1: PDADC: Chain 0 | PDADC 100 Value 219 | PDADC 101 Value 219 | PDADC 102 Value 219 | PDADC 103 Value 219 |
[ 10.917892] ath: phy1: PDADC (0, 0): a2e8 dbdbdbdb
[ 10.917900] ath: phy1: PDADC: Chain 0 | PDADC 104 Value 219 | PDADC 105 Value 219 | PDADC 106 Value 219 | PDADC 107 Value 219 |
[ 10.917907] ath: phy1: PDADC (0, 0): a2ec dbdbdbdb
[ 10.917915] ath: phy1: PDADC: Chain 0 | PDADC 108 Value 219 | PDADC 109 Value 219 | PDADC 110 Value 219 | PDADC 111 Value 219 |
[ 10.917922] ath: phy1: PDADC (0, 0): a2f0 dbdbdbdb
[ 10.917931] ath: phy1: PDADC: Chain 0 | PDADC 112 Value 219 | PDADC 113 Value 219 | PDADC 114 Value 219 | PDADC 115 Value 219 |
[ 10.917937] ath: phy1: PDADC (0, 0): a2f4 dbdbdbdb
[ 10.917946] ath: phy1: PDADC: Chain 0 | PDADC 116 Value 219 | PDADC 117 Value 219 | PDADC 118 Value 219 | PDADC 119 Value 219 |
[ 10.917952] ath: phy1: PDADC (0, 0): a2f8 dbdbdbdb
[ 10.917961] ath: phy1: PDADC: Chain 0 | PDADC 120 Value 219 | PDADC 121 Value 219 | PDADC 122 Value 219 | PDADC 123 Value 219 |
[ 10.917968] ath: phy1: PDADC (0, 0): a2fc dbdbdbdb
[ 10.917976] ath: phy1: PDADC: Chain 0 | PDADC 124 Value 219 | PDADC 125 Value 219 | PDADC 126 Value 219 | PDADC 127 Value 219 |
[ 10.945597] ath: phy1: Reset TX queue: 0
[ 10.946468] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 10.947465] ath: phy1: Reset TX queue: 1
[ 10.948466] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 10.949466] ath: phy1: Reset TX queue: 2
[ 10.950467] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 10.951465] ath: phy1: Reset TX queue: 3
[ 10.952466] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 10.953465] ath: phy1: Reset TXQ, inactive queue: 4
[ 10.953471] ath: phy1: Reset TXQ, inactive queue: 5
[ 10.953476] ath: phy1: Reset TXQ, inactive queue: 6
[ 10.953482] ath: phy1: Reset TXQ, inactive queue: 7
[ 10.953487] ath: phy1: Reset TX queue: 8
[ 10.957468] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 10.958468] ath: phy1: Reset TX queue: 9
[ 10.961468] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 10.963469] ath: phy1: ver 320.1 opmode 2 chan 2312 Mhz
[ 10.971593] ath: phy1: ah->misc_mode 0x4
[ 11.038521] ath: phy1: enabling ADC Gain Calibration
[ 11.038535] ath: phy1: enabling ADC DC Calibration
[ 11.038540] ath: phy1: enabling IQ Calibration
[ 11.040482] ath: phy1: starting ADC Gain Calibration
[ 11.047482] ATH: ath9k_htc_opmode_init
[ 11.049481] ATH: ath9k_htc_calcrxfilter
[ 11.049486] ATH:ath9k_hw_setrxfilter
[ 11.053503] ath: phy1: Enable MIB counters
[ 11.055506] ath: phy1: Restore history: opmode 2 chan 2312 Mhz is_scanning=0 ofdm:3 cck:2
[ 11.055520] ath: phy1: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
[ 11.055529] ath: phy1: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
[ 11.055533] ATH: ath9k_ani_restart function
[ 11.055537] ATH: ath9k_ani_restart function after if (!ah->curchan)
[ 11.059507] ATH: ath9k_htc_configure_filter
[ 11.061487] ATH: ath9k_htc_calcrxfilter
[ 11.061492] ATH:ath9k_hw_setrxfilter
[ 11.063490] ath: phy1: Set HW RX filter: 0x17
[ 11.068488] ath: phy1: AWAKE -> FULL-SLEEP
[ 11.071504] ath: phy1: FULL-SLEEP -> AWAKE
[ 11.077631] ath: phy1: Attached a monitor interface at idx: 0, sta idx: 0
[ 11.077638] ath: phy1: Set channel: 2312 MHz
[ 11.080493] ath: phy1: (2312 MHz) -> (2312 MHz), HT: 0, HT40: 0 fastcc: 0
[ 11.126521] ath: phy1: PDADC (0, 0): a280 04030201
[ 11.126537] ath: phy1: PDADC: Chain 0 | PDADC 0 Value 1 | PDADC 1 Value 2 | PDADC 2 Value 3 | PDADC 3 Value 4 |
[ 11.126544] ath: phy1: PDADC (0, 0): a284 08070605
[ 11.126552] ath: phy1: PDADC: Chain 0 | PDADC 4 Value 5 | PDADC 5 Value 6 | PDADC 6 Value 7 | PDADC 7 Value 8 |
[ 11.126559] ath: phy1: PDADC (0, 0): a288 0d0c0a09
[ 11.126567] ath: phy1: PDADC: Chain 0 | PDADC 8 Value 9 | PDADC 9 Value 10 | PDADC 10 Value 12 | PDADC 11 Value 13 |
[ 11.126574] ath: phy1: PDADC (0, 0): a28c 1311100e
[ 11.126583] ath: phy1: PDADC: Chain 0 | PDADC 12 Value 14 | PDADC 13 Value 16 | PDADC 14 Value 17 | PDADC 15 Value 19 |
[ 11.126590] ath: phy1: PDADC (0, 0): a290 18171614
[ 11.126608] ath: phy1: PDADC: Chain 0 | PDADC 16 Value 20 | PDADC 17 Value 22 | PDADC 18 Value 23 | PDADC 19 Value 24 |
[ 11.126627] ath: phy1: PDADC (0, 0): a294 23201c1a
[ 11.126636] ath: phy1: PDADC: Chain 0 | PDADC 20 Value 26 | PDADC 21 Value 28 | PDADC 22 Value 32 | PDADC 23 Value 35 |
[ 11.126643] ath: phy1: PDADC (0, 0): a298 302d2a26
[ 11.126651] ath: phy1: PDADC: Chain 0 | PDADC 24 Value 38 | PDADC 25 Value 42 | PDADC 26 Value 45 | PDADC 27 Value 48 |
[ 11.126658] ath: phy1: PDADC (0, 0): a29c 3e3a3734
[ 11.126666] ath: phy1: PDADC: Chain 0 | PDADC 28 Value 52 | PDADC 29 Value 55 | PDADC 30 Value 58 | PDADC 31 Value 62 |
[ 11.126673] ath: phy1: PDADC (0, 0): a2a0 57514a44
[ 11.126681] ath: phy1: PDADC: Chain 0 | PDADC 32 Value 68 | PDADC 33 Value 74 | PDADC 34 Value 81 | PDADC 35 Value 87 |
[ 11.126688] ath: phy1: PDADC (0, 0): a2a4 716b645e
[ 11.126697] ath: phy1: PDADC: Chain 0 | PDADC 36 Value 94 | PDADC 37 Value 100 | PDADC 38 Value 107 | PDADC 39 Value 113 |
[ 11.126704] ath: phy1: PDADC (0, 0): a2a8 8d867f78
[ 11.126712] ath: phy1: PDADC: Chain 0 | PDADC 40 Value 120 | PDADC 41 Value 127 | PDADC 42 Value 134 | PDADC 43 Value 141 |
[ 11.126719] ath: phy1: PDADC (0, 0): a2ac 2a262294
[ 11.126736] ath: phy1: PDADC: Chain 0 | PDADC 44 Value 148 | PDADC 45 Value 34 | PDADC 46 Value 38 | PDADC 47 Value 42 |
[ 11.126743] ath: phy1: PDADC (0, 0): a2b0 3a36322e
[ 11.126751] ath: phy1: PDADC: Chain 0 | PDADC 48 Value 46 | PDADC 49 Value 50 | PDADC 50 Value 54 | PDADC 51 Value 58 |
[ 11.126758] ath: phy1: PDADC (0, 0): a2b4 4e48423e
[ 11.126766] ath: phy1: PDADC: Chain 0 | PDADC 52 Value 62 | PDADC 53 Value 66 | PDADC 54 Value 72 | PDADC 55 Value 78 |
[ 11.126773] ath: phy1: PDADC (0, 0): a2b8 66605a54
[ 11.126781] ath: phy1: PDADC: Chain 0 | PDADC 56 Value 84 | PDADC 57 Value 90 | PDADC 58 Value 96 | PDADC 59 Value 102 |
[ 11.126788] ath: phy1: PDADC (0, 0): a2bc 847d756d
[ 11.126797] ath: phy1: PDADC: Chain 0 | PDADC 60 Value 109 | PDADC 61 Value 117 | PDADC 62 Value 125 | PDADC 63 Value 132 |
[ 11.126803] ath: phy1: PDADC (0, 0): a2c0 a59c948c
[ 11.126812] ath: phy1: PDADC: Chain 0 | PDADC 64 Value 140 | PDADC 65 Value 148 | PDADC 66 Value 156 | PDADC 67 Value 165 |
[ 11.126818] ath: phy1: PDADC (0, 0): a2c4 c9c0b7ae
[ 11.126828] ath: phy1: PDADC: Chain 0 | PDADC 68 Value 174 | PDADC 69 Value 183 | PDADC 70 Value 192 | PDADC 71 Value 201 |
[ 11.126834] ath: phy1: PDADC (0, 0): a2c8 dbdbdbd2
[ 11.126843] ath: phy1: PDADC: Chain 0 | PDADC 72 Value 210 | PDADC 73 Value 219 | PDADC 74 Value 219 | PDADC 75 Value 219 |
[ 11.126859] ath: phy1: PDADC (0, 0): a2cc dbdbdbdb
[ 11.126868] ath: phy1: PDADC: Chain 0 | PDADC 76 Value 219 | PDADC 77 Value 219 | PDADC 78 Value 219 | PDADC 79 Value 219 |
[ 11.126875] ath: phy1: PDADC (0, 0): a2d0 dbdbdbdb
[ 11.126883] ath: phy1: PDADC: Chain 0 | PDADC 80 Value 219 | PDADC 81 Value 219 | PDADC 82 Value 219 | PDADC 83 Value 219 |
[ 11.126890] ath: phy1: PDADC (0, 0): a2d4 dbdbdbdb
[ 11.126898] ath: phy1: PDADC: Chain 0 | PDADC 84 Value 219 | PDADC 85 Value 219 | PDADC 86 Value 219 | PDADC 87 Value 219 |
[ 11.126905] ath: phy1: PDADC (0, 0): a2d8 dbdbdbdb
[ 11.126914] ath: phy1: PDADC: Chain 0 | PDADC 88 Value 219 | PDADC 89 Value 219 | PDADC 90 Value 219 | PDADC 91 Value 219 |
[ 11.126920] ath: phy1: PDADC (0, 0): a2dc dbdbdbdb
[ 11.126929] ath: phy1: PDADC: Chain 0 | PDADC 92 Value 219 | PDADC 93 Value 219 | PDADC 94 Value 219 | PDADC 95 Value 219 |
[ 11.126935] ath: phy1: PDADC (0, 0): a2e0 dbdbdbdb
[ 11.126944] ath: phy1: PDADC: Chain 0 | PDADC 96 Value 219 | PDADC 97 Value 219 | PDADC 98 Value 219 | PDADC 99 Value 219 |
[ 11.126950] ath: phy1: PDADC (0, 0): a2e4 dbdbdbdb
[ 11.126959] ath: phy1: PDADC: Chain 0 | PDADC 100 Value 219 | PDADC 101 Value 219 | PDADC 102 Value 219 | PDADC 103 Value 219 |
[ 11.126965] ath: phy1: PDADC (0, 0): a2e8 dbdbdbdb
[ 11.126981] ath: phy1: PDADC: Chain 0 | PDADC 104 Value 219 | PDADC 105 Value 219 | PDADC 106 Value 219 | PDADC 107 Value 219 |
[ 11.126988] ath: phy1: PDADC (0, 0): a2ec dbdbdbdb
[ 11.126997] ath: phy1: PDADC: Chain 0 | PDADC 108 Value 219 | PDADC 109 Value 219 | PDADC 110 Value 219 | PDADC 111 Value 219 |
[ 11.127003] ath: phy1: PDADC (0, 0): a2f0 dbdbdbdb
[ 11.127012] ath: phy1: PDADC: Chain 0 | PDADC 112 Value 219 | PDADC 113 Value 219 | PDADC 114 Value 219 | PDADC 115 Value 219 |
[ 11.127018] ath: phy1: PDADC (0, 0): a2f4 dbdbdbdb
[ 11.127027] ath: phy1: PDADC: Chain 0 | PDADC 116 Value 219 | PDADC 117 Value 219 | PDADC 118 Value 219 | PDADC 119 Value 219 |
[ 11.127033] ath: phy1: PDADC (0, 0): a2f8 dbdbdbdb
[ 11.127042] ath: phy1: PDADC: Chain 0 | PDADC 120 Value 219 | PDADC 121 Value 219 | PDADC 122 Value 219 | PDADC 123 Value 219 |
[ 11.127048] ath: phy1: PDADC (0, 0): a2fc dbdbdbdb
[ 11.127057] ath: phy1: PDADC: Chain 0 | PDADC 124 Value 219 | PDADC 125 Value 219 | PDADC 126 Value 219 | PDADC 127 Value 219 |
[ 11.155663] ath: phy1: Reset TX queue: 0
[ 11.156522] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 11.157502] ath: phy1: Reset TX queue: 1
[ 11.158543] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 11.159506] ath: phy1: Reset TX queue: 2
[ 11.160535] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 11.161518] ath: phy1: Reset TX queue: 3
[ 11.162528] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 11.163529] ath: phy1: Reset TXQ, inactive queue: 4
[ 11.163540] ath: phy1: Reset TXQ, inactive queue: 5
[ 11.163546] ath: phy1: Reset TXQ, inactive queue: 6
[ 11.163551] ath: phy1: Reset TXQ, inactive queue: 7
[ 11.163556] ath: phy1: Reset TX queue: 8
[ 11.167505] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 11.168500] ath: phy1: Reset TX queue: 9
[ 11.171501] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 11.173503] ath: phy1: ver 320.1 opmode 6 chan 2312 Mhz
[ 11.181683] ath: phy1: ah->misc_mode 0x4
[ 11.245512] ath: phy1: enabling ADC Gain Calibration
[ 11.245520] ath: phy1: enabling ADC DC Calibration
[ 11.245525] ath: phy1: enabling IQ Calibration
[ 11.247509] ath: phy1: starting ADC Gain Calibration
[ 11.252507] ATH: ath9k_htc_opmode_init
[ 11.254508] ATH: ath9k_htc_calcrxfilter
[ 11.254514] ATH:ath9k_hw_setrxfilter
[ 11.260061] ath: phy1: Enable MIB counters
[ 11.262751] ath: phy1: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
[ 11.262775] ath: phy1: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
[ 11.262786] ATH: ath9k_ani_restart function
[ 11.262793] ATH: ath9k_ani_restart function after if (!ah->curchan)
[ 11.266548] ATH: ath9k_htc_configure_filter
[ 11.268532] ATH: ath9k_htc_calcrxfilter
[ 11.268544] ATH:ath9k_hw_setrxfilter
[ 11.270539] ath: phy1: Set HW RX filter: 0x37
[ 11.475462] ath: phy1: Set channel: 2484 MHz
[ 11.488419] ath: phy1: (2312 MHz) -> (2484 MHz), HT: 0, HT40: 0 fastcc: 0
[ 11.490539] ath: phy1: NF calibrated [ctl] [chain 0] is -115
[ 11.490547] ath: phy1: NF[0] (-115) > MAX (-116), correcting to MAX
[ 11.538601] ath: phy1: PDADC (0, 0): a280 04030201
[ 11.538678] ath: phy1: PDADC: Chain 0 | PDADC 0 Value 1 | PDADC 1 Value 2 | PDADC 2 Value 3 | PDADC 3 Value 4 |
[ 11.538689] ath: phy1: PDADC (0, 0): a284 08070605
[ 11.538698] ath: phy1: PDADC: Chain 0 | PDADC 4 Value 5 | PDADC 5 Value 6 | PDADC 6 Value 7 | PDADC 7 Value 8 |
[ 11.538704] ath: phy1: PDADC (0, 0): a288 0d0c0a09
[ 11.538723] ath: phy1: PDADC: Chain 0 | PDADC 8 Value 9 | PDADC 9 Value 10 | PDADC 10 Value 12 | PDADC 11 Value 13 |
[ 11.538733] ath: phy1: PDADC (0, 0): a28c 1311100e
[ 11.538742] ath: phy1: PDADC: Chain 0 | PDADC 12 Value 14 | PDADC 13 Value 16 | PDADC 14 Value 17 | PDADC 15 Value 19 |
[ 11.538755] ath: phy1: PDADC (0, 0): a290 18171614
[ 11.538766] ath: phy1: PDADC: Chain 0 | PDADC 16 Value 20 | PDADC 17 Value 22 | PDADC 18 Value 23 | PDADC 19 Value 24 |
[ 11.538773] ath: phy1: PDADC (0, 0): a294 24201c1a
[ 11.538793] ath: phy1: PDADC: Chain 0 | PDADC 20 Value 26 | PDADC 21 Value 28 | PDADC 22 Value 32 | PDADC 23 Value 36 |
[ 11.538800] ath: phy1: PDADC (0, 0): a298 322e2b27
[ 11.538810] ath: phy1: PDADC: Chain 0 | PDADC 24 Value 39 | PDADC 25 Value 43 | PDADC 26 Value 46 | PDADC 27 Value 50 |
[ 11.538819] ath: phy1: PDADC (0, 0): a29c 413d3936
[ 11.538829] ath: phy1: PDADC: Chain 0 | PDADC 28 Value 54 | PDADC 29 Value 57 | PDADC 30 Value 61 | PDADC 31 Value 65 |
[ 11.538835] ath: phy1: PDADC (0, 0): a2a0 5d564f48
[ 11.538844] ath: phy1: PDADC: Chain 0 | PDADC 32 Value 72 | PDADC 33 Value 79 | PDADC 34 Value 86 | PDADC 35 Value 93 |
[ 11.538850] ath: phy1: PDADC (0, 0): a2a4 79726b64
[ 11.538860] ath: phy1: PDADC: Chain 0 | PDADC 36 Value 100 | PDADC 37 Value 107 | PDADC 38 Value 114 | PDADC 39 Value 121 |
[ 11.538869] ath: phy1: PDADC (0, 0): a2a8 958e8780
[ 11.538878] ath: phy1: PDADC: Chain 0 | PDADC 40 Value 128 | PDADC 41 Value 135 | PDADC 42 Value 142 | PDADC 43 Value 149 |
[ 11.538888] ath: phy1: PDADC (0, 0): a2ac 312d2925
[ 11.538898] ath: phy1: PDADC: Chain 0 | PDADC 44 Value 37 | PDADC 45 Value 41 | PDADC 46 Value 45 | PDADC 47 Value 49 |
[ 11.538933] ath: phy1: PDADC (0, 0): a2b0 413d3935
[ 11.538958] ath: phy1: PDADC: Chain 0 | PDADC 48 Value 53 | PDADC 49 Value 57 | PDADC 50 Value 61 | PDADC 51 Value 65 |
[ 11.538969] ath: phy1: PDADC (0, 0): a2b4 56504a45
[ 11.538978] ath: phy1: PDADC: Chain 0 | PDADC 52 Value 69 | PDADC 53 Value 74 | PDADC 54 Value 80 | PDADC 55 Value 86 |
[ 11.538984] ath: phy1: PDADC (0, 0): a2b8 6e68625c
[ 11.538993] ath: phy1: PDADC: Chain 0 | PDADC 56 Value 92 | PDADC 57 Value 98 | PDADC 58 Value 104 | PDADC 59 Value 110 |
[ 11.539000] ath: phy1: PDADC (0, 0): a2bc 968c8278
[ 11.539009] ath: phy1: PDADC: Chain 0 | PDADC 60 Value 120 | PDADC 61 Value 130 | PDADC 62 Value 140 | PDADC 63 Value 150 |
[ 11.539015] ath: phy1: PDADC (0, 0): a2c0 beb4aaa0
[ 11.539024] ath: phy1: PDADC: Chain 0 | PDADC 64 Value 160 | PDADC 65 Value 170 | PDADC 66 Value 180 | PDADC 67 Value 190 |
[ 11.539044] ath: phy1: PDADC (0, 0): a2c4 e6dcd2c8
[ 11.539053] ath: phy1: PDADC: Chain 0 | PDADC 68 Value 200 | PDADC 69 Value 210 | PDADC 70 Value 220 | PDADC 71 Value 230 |
[ 11.539060] ath: phy1: PDADC (0, 0): a2c8 e6e6e6e6
[ 11.539069] ath: phy1: PDADC: Chain 0 | PDADC 72 Value 230 | PDADC 73 Value 230 | PDADC 74 Value 230 | PDADC 75 Value 230 |
[ 11.539075] ath: phy1: PDADC (0, 0): a2cc e6e6e6e6
[ 11.539084] ath: phy1: PDADC: Chain 0 | PDADC 76 Value 230 | PDADC 77 Value 230 | PDADC 78 Value 230 | PDADC 79 Value 230 |
[ 11.539091] ath: phy1: PDADC (0, 0): a2d0 e6e6e6e6
[ 11.539099] ath: phy1: PDADC: Chain 0 | PDADC 80 Value 230 | PDADC 81 Value 230 | PDADC 82 Value 230 | PDADC 83 Value 230 |
[ 11.539106] ath: phy1: PDADC (0, 0): a2d4 e6e6e6e6
[ 11.539114] ath: phy1: PDADC: Chain 0 | PDADC 84 Value 230 | PDADC 85 Value 230 | PDADC 86 Value 230 | PDADC 87 Value 230 |
[ 11.539121] ath: phy1: PDADC (0, 0): a2d8 e6e6e6e6
[ 11.539130] ath: phy1: PDADC: Chain 0 | PDADC 88 Value 230 | PDADC 89 Value 230 | PDADC 90 Value 230 | PDADC 91 Value 230 |
[ 11.539137] ath: phy1: PDADC (0, 0): a2dc e6e6e6e6
[ 11.539145] ath: phy1: PDADC: Chain 0 | PDADC 92 Value 230 | PDADC 93 Value 230 | PDADC 94 Value 230 | PDADC 95 Value 230 |
[ 11.539170] ath: phy1: PDADC (0, 0): a2e0 e6e6e6e6
[ 11.539179] ath: phy1: PDADC: Chain 0 | PDADC 96 Value 230 | PDADC 97 Value 230 | PDADC 98 Value 230 | PDADC 99 Value 230 |
[ 11.539185] ath: phy1: PDADC (0, 0): a2e4 e6e6e6e6
[ 11.539194] ath: phy1: PDADC: Chain 0 | PDADC 100 Value 230 | PDADC 101 Value 230 | PDADC 102 Value 230 | PDADC 103 Value 230 |
[ 11.539201] ath: phy1: PDADC (0, 0): a2e8 e6e6e6e6
[ 11.539209] ath: phy1: PDADC: Chain 0 | PDADC 104 Value 230 | PDADC 105 Value 230 | PDADC 106 Value 230 | PDADC 107 Value 230 |
[ 11.539217] ath: phy1: PDADC (0, 0): a2ec e6e6e6e6
[ 11.539225] ath: phy1: PDADC: Chain 0 | PDADC 108 Value 230 | PDADC 109 Value 230 | PDADC 110 Value 230 | PDADC 111 Value 230 |
[ 11.539236] ath: phy1: PDADC (0, 0): a2f0 e6e6e6e6
[ 11.539266] ath: phy1: PDADC: Chain 0 | PDADC 112 Value 230 | PDADC 113 Value 230 | PDADC 114 Value 230 | PDADC 115 Value 230 |
[ 11.539301] ath: phy1: PDADC (0, 0): a2f4 e6e6e6e6
[ 11.539319] ath: phy1: PDADC: Chain 0 | PDADC 116 Value 230 | PDADC 117 Value 230 | PDADC 118 Value 230 | PDADC 119 Value 230 |
[ 11.539339] ath: phy1: PDADC (0, 0): a2f8 e6e6e6e6
[ 11.539355] ath: phy1: PDADC: Chain 0 | PDADC 120 Value 230 | PDADC 121 Value 230 | PDADC 122 Value 230 | PDADC 123 Value 230 |
[ 11.539373] ath: phy1: PDADC (0, 0): a2fc e6e6e6e6
[ 11.539397] ath: phy1: PDADC: Chain 0 | PDADC 124 Value 230 | PDADC 125 Value 230 | PDADC 126 Value 230 | PDADC 127 Value 230 |
[ 11.566688] ath: phy1: Reset TX queue: 0
[ 11.567555] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 11.568552] ath: phy1: Reset TX queue: 1
[ 11.569554] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 11.570552] ath: phy1: Reset TX queue: 2
[ 11.571554] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 11.572552] ath: phy1: Reset TX queue: 3
[ 11.573556] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 11.574554] ath: phy1: Reset TXQ, inactive queue: 4
[ 11.574560] ath: phy1: Reset TXQ, inactive queue: 5
[ 11.574565] ath: phy1: Reset TXQ, inactive queue: 6
[ 11.574570] ath: phy1: Reset TXQ, inactive queue: 7
[ 11.574575] ath: phy1: Reset TX queue: 8
[ 11.578554] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 11.579554] ath: phy1: Reset TX queue: 9
[ 11.582556] ath: phy1: tx ok 0x0 err 0x0 desc 0x10f eol 0x10f urn 0x0
[ 11.584555] ath: phy1: ver 320.1 opmode 6 chan 2484 Mhz
[ 11.592681] ath: phy1: ah->misc_mode 0x4
[ 11.656582] ath: phy1: enabling ADC Gain Calibration
[ 11.656595] ath: phy1: enabling ADC DC Calibration
[ 11.656600] ath: phy1: enabling IQ Calibration
[ 11.658584] ath: phy1: starting ADC Gain Calibration
[ 11.663579] ATH: ath9k_htc_opmode_init
[ 11.665585] ATH: ath9k_htc_calcrxfilter
[ 11.665596] ATH:ath9k_hw_setrxfilter
[ 11.669567] ath: phy1: Enable MIB counters
[ 11.671565] ath: phy1: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
[ 11.671574] ath: phy1: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
[ 11.671579] ATH: ath9k_ani_restart function
[ 11.671584] ATH: ath9k_ani_restart function after if (!ah->curchan)
That's strange, I wasn't even getting these messages when I had 0xffffffff set. I have the kernel compiled for debugging ath9k_htc and set the bit and everything.
I have these wireless related debugging settings in the kernel .config file:
CONFIG_CFG80211_DEBUGFS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_ATH_DEBUG=y
CONFIG_ATH9K_DEBUGFS=y
CONFIG_ATH9K_HTC_DEBUGFS=y
Thanks, turns out I neglected to enable CONFIG_ATH_DEBUG
the first time around. Now I got it recompiled, and I can also report that it's not doing any periodic calibrations. Here's the output for one of the cards when I manually switched the from channel 1 to channel 2 after it stalled on channel 1:
[ 2909.583318] ath: phy0: NF calibrated [ctl] [chain 0] is -112
[ 2909.583333] ath: phy0: NF[0] (-112) > MAX (-116), correcting to MAX
[ 2909.583340] ath: phy0: NF calibrated [ext] [chain 0] is -110
[ 2909.583382] ath: phy0: NF[3] (-110) > MAX (-116), correcting to MAX
[ 2909.752322] ath: phy0: enabling ADC Gain Calibration
[ 2909.752335] ath: phy0: enabling ADC DC Calibration
[ 2909.752340] ath: phy0: enabling IQ Calibration
[ 2909.754301] ath: phy0: starting ADC Gain Calibration
Here it is for the other card after it similarly froze and I manually changed the channel to 2:
[ 2963.387943] ath: phy1: NF calibrated [ctl] [chain 0] is -107
[ 2963.387965] ath: phy1: NF[0] (-107) > MAX (-116), correcting to MAX
[ 2963.387974] ath: phy1: NF calibrated [ext] [chain 0] is -106
[ 2963.387987] ath: phy1: NF[3] (-106) > MAX (-116), correcting to MAX
[ 2963.568711] ath: phy1: enabling ADC Gain Calibration
[ 2963.568724] ath: phy1: enabling ADC DC Calibration
[ 2963.568732] ath: phy1: enabling IQ Calibration
[ 2963.570441] ath: phy1: starting ADC Gain Calibration
And after switching back to channel 1:
[ 2963.791457] ath: phy1: NF calibrated [ctl] [chain 0] is -105
[ 2963.791472] ath: phy1: NF[0] (-105) > MAX (-116), correcting to MAX
[ 2963.791479] ath: phy1: NF calibrated [ext] [chain 0] is -108
[ 2963.791523] ath: phy1: NF[3] (-108) > MAX (-116), correcting to MAX
[ 2963.967462] ath: phy1: enabling ADC Gain Calibration
[ 2963.967474] ath: phy1: enabling ADC DC Calibration
[ 2963.967483] ath: phy1: enabling IQ Calibration
[ 2963.969444] ath: phy1: starting ADC Gain Calibration
There are no new messages in dmesg
after it starts stalling, nor when it is performing normally.
@rodizio1 Here's something to try: I wrote a script to switch through all the channels 1–11 every 10 minutes and return back to channel 1 for another 10 minutes, and found that it begins stalling a lot faster after this. It stops stalling of course when the next channel hopping session begins. My script also gets the packets seen in ifconfig and prints something out if it doesn't change within 3 seconds, so that's how I know it's stalled.
the bug is that we should be doing periodic nfcal and other calibrations or the nics will slowly go deaf.
-a
On 26 February 2017 at 14:06, melikyuksel notifications@github.com wrote:
@rodizio1 https://github.com/rodizio1 Here's something to try: I wrote a script to switch through all the channels 1–11 every 10 minutes and return back to channel 1 for another 10 minutes, and found that it begins stalling a lot faster after this. It stops stalling of course when the next channel hopping session begins. My script also gets the packets seen in ifconfig and prints something out if it doesn't change within 3 seconds, so that's how I know it's stalled.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/qca/open-ath9k-htc-firmware/issues/126#issuecomment-282591993, or mute the thread https://github.com/notifications/unsubscribe-auth/ABGl7fUahynkbeCWlbRakqqHOEybUP9bks5rgfdigaJpZM4MKxUF .
Sounds good, but why would that deafening process depend on the volume of packets (or some certain type of error packet?) as seems to be the case? Does more traffic accelerate the deafening?
Apart from the conspicuous lack of periodic calibration messages, the only things I've noticed is this message occasionally in dmesg
:
[ 5743.651260] ath: phy0: Timeout waiting for WMI command: WMI_REG_RMW_CMDID
[ 5743.651314] ath: phy0: REGISTER RMW FAILED:(0x4048, -110)
and the extreme increase in the frequency of the stalling when channels are switched occasionally. If I run a script to change the channel once every 10 minutes, the cards sometimes begin to stall within minutes or seconds of being set to a channel. For this area, at least.
@melikyuksel , it has nothing to do with number of packages. My adapter was running for some days now, and it is still working. More noise in the air will force the adapter to increase the noise floor level on rx line. The noise is not always at same level, it can have spikes. So if adapter will apply the filter at the level of this spike, then we will get deaf. The ath9k code has logic for periodic calibration. ath9k-htc don't have it. Some one should make this code common, between ath9k and ath9k-htc.
@olerem Thanks for the explanation, it makes a lot of sense (although not quite sure why switching channels often triggers a very quick deafening... maybe more noise is introduced during the switching process?). Is there anything one could do to add the calibration to the -htc themselves at the moment?
@melikyuksel , ... "Some one should make this code common, between ath9k and ath9k-htc.", most probably i will not find time to do this. So every one is welcome to contribute ... it is open source. The patch will look probably like this: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=67dc74f15f147b9f88702de2952d2951e3e000ec
@melikyuksel Those crashes/issues you see while switching channels is a different issue. I also have these problems, something is buggy there, also happens when switching to promiscous mode sometimes.
@olerem/erikarn: How can you guys be sure that it's the missing periodic noise floor calibration that is causing the issue? Why can I reproduce this without any noise-spikes being present, just by receiving a lot of bad-FCS frames? Different issue?
@rodizio1 True. I ended up writing a script to check for ath9k_htc interfaces, check if they're on monitor mode, and then check the RX packages every 5 seconds. If the packets stop increasing, it just quickly switches the channel and then switches it back. This seems to have "solved" these issues, but now I'm having the issue when multiple ath9k_htc cards don't start that you were having in the other thread. That's a whole another matter in itself... It's a pity we bought so many of these cards.
It looks like HTC NICs do calibration: ath9k_htc_start_ani() will start the ani work, and ath9k_htc_ani_work() will do the actual ANI, shortcal, longcal work.
The trouble(!) is, the ani_work is only added in certain circumstances, which is "technically" correct for ANI, but wrong for shortcal/longcal.
Eg - in ath9k_htc_add_interface(), it's only started if it's an AP, and ANI is enabled. For STA mode in ath9k_htc_bss_info_changed(), it's only started if it's associated, and number of associated vifs is 1.
For monitor mode, it's not doing ANI, which means its not doing periodic calibration.
So as a test, let's just enable it always for monitor mode.
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index a553c91..a4f84c2 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -1104,6 +1104,11 @@ static int ath9k_htc_add_interface(struct ieee80211_hw *hw, ath9k_htc_start_ani(priv); }
ath_dbg(common, CONFIG, "Attach a VIF of type: %d at idx: %d\n",
vif->type, avp->index);
And I'll go look at tidying this code up to always run the ANI routine in hostap/STA/monitor/mesh mode so periodic calibration runs, then just skips ANI if ANI is configured as disabled. This whole "don't do ANI" stuff is conflating with the "do periodic calibration" stuff, and that's why your NICs go deaf. :-)
-adrian
On 9 March 2017 at 09:56, melikyuksel notifications@github.com wrote:
@rodizio1 https://github.com/rodizio1 True. I ended up writing a script to check for ath9k_htc interfaces, check if they're on monitor mode, and then check the RX packages every 5 seconds. If the packets stop increasing, it just switches the channel and then switches it back. This seems to have "solved" these issues, but now I'm having the issue when multiple ath9k_htc cards don't start that you were having in the other thread. That's a whole another matter in itself...
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/qca/open-ath9k-htc-firmware/issues/126#issuecomment-285428546, or mute the thread https://github.com/notifications/unsubscribe-auth/ABGl7fA2nOr1pDDXQFU0EHzI1zOFzeYcks5rkD1GgaJpZM4MKxUF .
@erikarn I would love to try this patch on the Raspberry Pi, but I can't seem to recompile the ath9k module on there without somehow messing up its ability to handle more than 2 AR9271 devices at the same time (seen in the other issue thread). I'll try it later with a fresh install. I will be trying this on Debian however!
EDIT: Managed to get the patch applied to both Debian and Raspbian and get all the cards up, and I'm testing them right now.
hiya,
please do test it out. I'll get linux-next going again on something laptop-y next week so I can fully figure out what's going on with all of this calibration nonsense. :)
-adrian
On 12 March 2017 at 00:23, melikyuksel notifications@github.com wrote:
@erikarn https://github.com/erikarn I would love to try this patch on the Raspberry Pi, but I can't seem to recompile the ath9k module on there without somehow messing up its ability to recognize more than 2 AR9271 devices at the same time (seen in the other issue thread). I will be trying this, however, on Debian!
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/qca/open-ath9k-htc-firmware/issues/126#issuecomment-285929872, or mute the thread https://github.com/notifications/unsubscribe-auth/ABGl7a_nmxzI6ZXilxLeFsD9oGUMorsgks5rk6uPgaJpZM4MKxUF .
@erikarn I seem to have had the first surrender, where one of the cards stopped after 50 minutes (with channel hopping being done every 10 minutes). But where is that printk
message supposed to show up? I checked dmesg and did not see it there, but I modified some of the messages in hif_usb.c at the same time, and I do see those. Those use the dev_info
function, apparently:
dev_info(&hif_dev->udev->dev, "ath9k_htc: MODIFIED Transferred FW: %s, size: %ld\n",
hif_dev->fw_name, (unsigned long) hif_dev->fw_size);
Just checking in case the patch didn't go through for some reason. I wrote a test module ("hello world!") with printk
and that did show up in dmesg, so I don't think the driver's even getting to this line.
It's supposed to show up when the interface is created. If it's not printing it out, then it's not starting.
Which kernel version are you using? Does ti really not show up in 'dmesg' ?
-adrian
On 12 March 2017 at 18:00, melikyuksel notifications@github.com wrote:
@erikarn https://github.com/erikarn I seem to have had the first surrender, where one of the cards stopped after 50 minutes (with channel hopping being done every 10 minutes). But where is that printk message supposed to show up? I checked dmesg and did not see it there, but I modified some of the messages in hif_usb.c at the same time, and I do see those. Those use the dev_info function, apparently:
dev_info(&hif_dev->udev->dev, "ath9k_htc: Transferred FW: %s, size: %ld\n", hif_dev->fw_name, (unsigned long) hif_dev->fw_size);
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/qca/open-ath9k-htc-firmware/issues/126#issuecomment-285993064, or mute the thread https://github.com/notifications/unsubscribe-auth/ABGl7c_R3pMI780ADKPCrQZKn2_P7XCwks5rlJUsgaJpZM4MKxUF .
@erikarn This is 4.4.50. It doesn't show up in dmesg, but expected lines from the other files do show up. Just not this one.
ok, need to figure out why that is. Can someone else help out enabling the ANI timer like I have in that patch? It should make things work.
-adrian
I have added the patch now to Raspberry Kernel 4.4.11. It seems the "if (vif->type ..." condition does not match. Commented out the if condition and then I get the "ath9k_htc_add_interface: starting ANI, monitor mode" debug line in dmesg.
ok, does that fix it?
also, can you printk the vif->type value? What interface type are you creating?
-adrian
On 20 March 2017 at 08:01, Rodizio notifications@github.com wrote:
I have added the patch now to Raspberry Kernel 4.4.11. It seems the "if (vif->type ..." condition does not match. Commented out the if condition and then I get the "ath9k_htc_add_interface: starting ANI, monitor mode" debug line in dmesg.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/qca/open-ath9k-htc-firmware/issues/126#issuecomment-287786442, or mute the thread https://github.com/notifications/unsubscribe-auth/ABGl7aaKljKSjnJwNyRtS8jImASEuKZ2ks5rnpS7gaJpZM4MKxUF .
@erikarn Had the chance to test it. The vif->type
value prints out as 2, which, if this is where it's getting it from, means NL80211_IFTYPE_STATION
instead. But it seems this part of the code only runs when the device is first plugged in (by default in station mode), and not again even when we bring the interface up or later when we put it into monitor mode.
Yes, I can confirm this. dmesg debug log only appears once after plugging the card.
Is this sufficient, i.e. will the chip still do noise floor calibration after it has been "ifconfig upped/downed" and put into monitor mode?
hi,
ok, we need to figure out how to get it to start ANI whenever the interface is created as well as down/up. It should always be doing period noise calibration when the NIC is up.
-adrian
On 5 April 2017 at 09:16, Rodizio notifications@github.com wrote:
Yes, I can confirm this. dmesg debug log only appears once after plugging the card.
Is this sufficient, i.e. will the chip still do noise floor calibration after it has been "ifconfig upped/downed" and put into monitor mode?
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/qca/open-ath9k-htc-firmware/issues/126#issuecomment-291914483, or mute the thread https://github.com/notifications/unsubscribe-auth/ABGl7Yv7Rm2WJ3mgskZUhMF5vogsbAlqks5rs75ugaJpZM4MKxUF .
Did you manage to solve this issue? I am having the same problem with COMPEX WLE350NX-7B mPCIe module (AR9580) and kernel 3.2.70. I tried all your suggestions with same results.. By now I solve this issue by detecting that the interface is stalled when I have too many select time-outs when reading the card in C code and then changing to another channel and setting it back to the one I want. It works but it is just a workaround...
thank you all,I according to your explanation,Modify the code,The original short time is deaf。Can now listen to 10 hours more。 Have the effect !!! According to the following debug information I should do next???? thank you very mach
device:AR9271USB `
[321921.310000] ath: phy21: ath9k_htc_ani_work()----------debug for me
[321921.310000] ath: phy21: shortcal @32162131
[321921.310000] ath: phy21: listenTime=22232025 OFDM:1 errs=99/s CCK:5 errs=150/s ofdm_turn=1
[321921.410000] ath: phy21: ath9k_htc_ani_work()
[321921.410000] ath: phy21: listenTime=22232122 OFDM:1 errs=99/s CCK:5 errs=150/s ofdm_turn=1
[321921.510000] ath: phy21: ath9k_htc_ani_work()
[321921.510000] ath: phy21: listenTime=22232219 OFDM:1 errs=99/s CCK:5 errs=150/s ofdm_turn=1
[321921.610000] ath: phy21: ath9k_htc_ani_work()
[321921.610000] ath: phy21: listenTime=22232316 OFDM:1 errs=99/s CCK:5 errs=150/s ofdm_turn=1
[321921.710000] ath: phy21: ath9k_htc_ani_work()
[321921.710000] ath: phy21: listenTime=22232413 OFDM:1 errs=99/s CCK:5 errs=150/s ofdm_turn=1
root@openwrt:~# ifconfig mon21
mon21 Link encap:UNSPEC HWaddr 00-12-7B-20-55-C8-7F-86-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:34265001 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:8844607858 (8.2 GiB) TX bytes:0 (0.0 B)
root@openwrt:~# ifconfig mon21
mon21 Link encap:UNSPEC HWaddr 00-12-7B-20-55-C8-7F-BA-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:34265001 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:8844607858 (8.2 GiB) TX bytes:0 (0.0 B)
`
Both the current and previous version seem to have the issue. After anywhere from 20 seconds to 3 hours or so of being in monitor mode, the interface stops receiving packets. It seems to die more quickly during busier times when it receives more packets. The
ifconfig
count stops increasing, and the driver debugdebug_fs
numbers also become static. The only way to get it to receive again is to change the channel (changing to another channel and then immediately switching back works; I don't know whether the card is slipping to a non-WiFi frequency or something, sinceiw
still reports it as being on the same frequency as it was before, and it makes no changes to the frequency if it thinks the card is already on the channel that is specified). It doesn't seem to be able to stay on one channel for very long.I've tried this with several Atheros AR9271 chipset cards, like the ALFA AWUS036NHA and TP-Link TL-WN722N. They all have the same issue. I've tried it on Debian, Kali, Raspbian, Raspbian Lite, and Arch, and I've gotten identical behavior. I've tried a powered USB hub, an unpowered hub, and no hub at all. I've tried it on a MacBook, a Virtual Machine, a Mac Mini, a Raspberry Pi, and a Pi Zero. I've tried it with all sorts of different antenna. I've tried power supplies of various amperages. I've tried it with all other processes killed. I've switched intermediary USB cables around and gotten rid of them altogether. Power save is off in both module parameters and in
iw
.dmesg
and syslog show no errors or events when this happens. The packets just silently stop coming in until the channel is changed. The activity LED on the cards stop blinking and turn solid. Other non-Atheros wireless adapters work fine on every system for weeks on an end without stopping packet reception.To reproduce, put any AR9271 wireless card into monitor mode and take it into a relatively crowded area. Don't change the channel (or do it, it might die faster if you do, it's Russian roulette). It may take seconds or hours, but it is guaranteed to stop receiving packets indefinitely after a certain point within the day.