Open camilleversteeg opened 7 years ago
Would you consider an update for a small donation?
@camilleversteeg A donation will sure help getting it higher on the priority list. For support, I would like to get my hands on one of those devices, so I can see the various reactions of the device on the on/off actions; otherwise I am afraid it will the same experience as you have now.
So if your donation would match the buying price, that would guarantee a prio-1 support and hopefully a fully supported device.
(I tried getting devices from Everspring directly, but so far, to no avail)
I added a new Z-wave device (http://products.z-wavealliance.org/products/694). Very simple device that should return if the wall-switch is used. The goal was to make my current wall-switches 'smart'. I bought the device at: https://www.e-domotica.com/nl/producten/signaleren/e-domotica-wandschakelaar-sensor. The goal is to make current wall switches smart so that I can control my Philips Hue lamps via the Homey.
I successfully paired the device with Homey. It showed as a Unknown Z-wave device and displays a on/off slider.
What was the result?
When I set the z-wave device in homey to "ON" and use the switch. It successfully switches to OFF. When the z-wave device in homey is set to "OFF" and use the switch. It does not do anything. It does not matter how many times i use the switch. The slider remains "OFF". Up until I manually change it to "ON" in the Homey.
What did you expect as result?
When the device is set to OFF and the switch is used, its turned to ON.
Any other remarks
The range between my Homey and this z-wave device was less then 2 meters.
See additional information:
![img_0685](https://cloud.githubusercontent.com/assets/15101655/21589442/2ff41e26-d0f2-11e6-864b-26a48f2f218f.JPG)