search

raspberrypi / rpi-sense

Sense HAT firmware and driver
67 stars 22 forks source link

Attempting to 'make flash' on Kali throws Can't find programmer id "linuxspi" #11

Open ANDERSONTECHWERKS opened 2 years ago

ANDERSONTECHWERKS commented 2 years ago

I'm running a Raspberry Pi 4b with the Kali ARM image flashed onto my SD drive. Downloaded the repo, ran make (with seemingly no issue) and now I get the following when trying to run make flash:

└─$ make flash
sudo avrdude -c linuxspi -p t88 -P /dev/spidev0.0 -U flash:w:rpi-sense.hex

avrdude: Can't find programmer id "linuxspi"

Valid programmers are:
  2232HIO          = FT2232H based generic programmer
  4232h            = FT4232H based generic programmer
  arduino          = Arduino
  arduino-ft232r   = Arduino: FT232R connected to ISP
  atmelice         = Atmel-ICE (ARM/AVR) in JTAG mode
  atmelice_dw      = Atmel-ICE (ARM/AVR) in debugWIRE mode
  atmelice_isp     = Atmel-ICE (ARM/AVR) in ISP mode
  atmelice_pdi     = Atmel-ICE (ARM/AVR) in PDI mode
  atmelice_updi    = Atmel-ICE (ARM/AVR) in UPDI mode
  avr109           = Atmel AppNote AVR109 Boot Loader
  avr910           = Atmel Low Cost Serial Programmer
  avr911           = Atmel AppNote AVR911 AVROSP
  avrftdi          = FT2232D based generic programmer
  avrisp           = Atmel AVR ISP
  avrisp2          = Atmel AVR ISP mkII
  avrispmkII       = Atmel AVR ISP mkII
  avrispv2         = Atmel AVR ISP V2
  buspirate        = The Bus Pirate
  buspirate_bb     = The Bus Pirate (bitbang interface, supports TPI)
  butterfly        = Atmel Butterfly Development Board
  butterfly_mk     = Mikrokopter.de Butterfly
  bwmega           = BitWizard ftdi_atmega builtin programmer
  C232HM           = FT232H based module from FTDI and Glyn.com.au
  c2n232i          = serial port banging, reset=dtr sck=!rts mosi=!txd miso=!cts
  dasa             = serial port banging, reset=rts sck=dtr mosi=txd miso=cts
  dasa3            = serial port banging, reset=!dtr sck=rts mosi=txd miso=cts
  diecimila        = alias for arduino-ft232r
  dragon_dw        = Atmel AVR Dragon in debugWire mode
  dragon_hvsp      = Atmel AVR Dragon in HVSP mode
  dragon_isp       = Atmel AVR Dragon in ISP mode
  dragon_jtag      = Atmel AVR Dragon in JTAG mode
  dragon_pdi       = Atmel AVR Dragon in PDI mode
  dragon_pp        = Atmel AVR Dragon in PP mode
  ehajo-isp        = avr-isp-programmer from eHaJo, http://www.eHaJo.de
  flip1            = FLIP USB DFU protocol version 1 (doc7618)
  flip2            = FLIP USB DFU protocol version 2 (AVR4023)
  ft232r           = FT232R Synchronous BitBang
  ft245r           = FT245R Synchronous BitBang
  jtag1            = Atmel JTAG ICE (mkI)
  jtag1slow        = Atmel JTAG ICE (mkI)
  jtag2            = Atmel JTAG ICE mkII
  jtag2avr32       = Atmel JTAG ICE mkII im AVR32 mode
  jtag2dw          = Atmel JTAG ICE mkII in debugWire mode
  jtag2fast        = Atmel JTAG ICE mkII
  jtag2isp         = Atmel JTAG ICE mkII in ISP mode
  jtag2pdi         = Atmel JTAG ICE mkII PDI mode
  jtag2slow        = Atmel JTAG ICE mkII
  jtag3            = Atmel AVR JTAGICE3 in JTAG mode
  jtag3dw          = Atmel AVR JTAGICE3 in debugWIRE mode
  jtag3isp         = Atmel AVR JTAGICE3 in ISP mode
  jtag3pdi         = Atmel AVR JTAGICE3 in PDI mode
  jtagkey          = Amontec JTAGKey, JTAGKey-Tiny and JTAGKey2
  jtagmkI          = Atmel JTAG ICE (mkI)
  jtagmkII         = Atmel JTAG ICE mkII
  jtagmkII_avr32   = Atmel JTAG ICE mkII im AVR32 mode
  lm3s811          = Luminary Micro LM3S811 Eval Board (Rev. A)
  mib510           = Crossbow MIB510 programming board
  mkbutterfly      = Mikrokopter.de Butterfly
  nibobee          = NIBObee
  o-link           = O-Link, OpenJTAG from www.100ask.net
  openmoko         = Openmoko debug board (v3)
  pavr             = Jason Kyle's pAVR Serial Programmer
  pickit2          = MicroChip's PICkit2 Programmer
  ponyser          = design ponyprog serial, reset=!txd sck=rts mosi=dtr miso=cts
  powerdebugger    = Atmel PowerDebugger (ARM/AVR) in JTAG mode
  powerdebugger_dw = Atmel PowerDebugger (ARM/AVR) in debugWire mode
  powerdebugger_isp = Atmel PowerDebugger (ARM/AVR) in ISP mode
  powerdebugger_pdi = Atmel PowerDebugger (ARM/AVR) in PDI mode
  powerdebugger_updi = Atmel PowerDebugger (ARM/AVR) in UPDI mode
  siprog           = Lancos SI-Prog <http://www.lancos.com/siprogsch.html>
  stk500           = Atmel STK500
  stk500hvsp       = Atmel STK500 V2 in high-voltage serial programming mode
  stk500pp         = Atmel STK500 V2 in parallel programming mode
  stk500v1         = Atmel STK500 Version 1.x firmware
  stk500v2         = Atmel STK500 Version 2.x firmware
  stk600           = Atmel STK600
  stk600hvsp       = Atmel STK600 in high-voltage serial programming mode
  stk600pp         = Atmel STK600 in parallel programming mode
  ttl232r          = FTDI TTL232R-5V with ICSP adapter
  tumpa            = TIAO USB Multi-Protocol Adapter
  UM232H           = FT232H based module from FTDI and Glyn.com.au
  uncompatino      = uncompatino with all pairs of pins shorted
  usbasp           = USBasp, http://www.fischl.de/usbasp/
  usbasp-clone     = Any usbasp clone with correct VID/PID
  usbtiny          = USBtiny simple USB programmer, https://learn.adafruit.com/usbtinyisp
  wiring           = Wiring
  xplainedmini     = Atmel AVR XplainedMini in ISP mode
  xplainedmini_dw  = Atmel AVR XplainedMini in debugWIRE mode
  xplainedmini_updi = Atmel AVR XplainedMini in UPDI mode
  xplainedpro      = Atmel AVR XplainedPro in JTAG mode
  xplainedpro_updi = Atmel AVR XplainedPro in UPDI mode

make: *** [Makefile:98: flash] Error 1

Let me know what else I can provide to help troubleshoot!

XECDesign commented 2 years ago

Sounds like a Kali issue if they don't provide a build of avrdude with the right programmer enabled.

pelwell commented 2 years ago

https://github.com/kcuzner/avrdude appears to be the original fork of avrdude that adds linuxspi support.

ANDERSONTECHWERKS commented 2 years ago

Appreciate it @pelwell - I will give that a shot when I get home from work!

Will close this issue if that corrects it.