search

ratgdo / esphome-ratgdo

ratgdo for ESPHome
GNU General Public License v2.0
359 stars 108 forks source link

Light turns on by itself a random times? [2.5i board, ESPHome] #120

Open shanelord01 opened 1 year ago

shanelord01 commented 1 year ago

Module: 2.5i Firmware: 2023.11.2 (Nov 19 2023, 21:43:41)

I have two 2.5i boards correctly wired to my Merlin 2.0+ door openers. That is unless someone can tell me I really must have the ground in the green push button ground (even though the ground seems to be shared).

IMG_1301 IMG_1302

They are then integrated into Home Assistant. At random times the lights turn on by themselves and this is what the log shows:

10:16:25 | [D] | [ratgdo:210] | Status: door=CLOSED light=OFF lock=UNLOCKED
-- | -- | -- | --
10:16:43 | [D] | [light:036] | 'Light' Setting:
10:16:44 | [D] | [number:012] | 'Rolling code counter': Sending state 131.000000
10:16:44 | [D] | [esp8266.preferences:238] | Saving preferences to flash...
10:17:01 | [D] | [ratgdo:210] | Status: door=CLOSED light=ON lock=UNLOCKED

Home Assistant looks like this: ha-ratgdo

If it wasn't for my auto-off automation, these lights stay on constantly, although the turn on issue does seem to mostly happen during the day.

Any ideas?

Thanks, Shane.

judeibe commented 1 year ago

I having the same symptoms on a Craftsman security 1.0.

finder39 commented 11 months ago

This is happening for me too on a Chamberlain Liftmaster security 1.0

judeibe commented 11 months ago

This is happening for me too on a Chamberlain Liftmaster security 1.0

I solved this case. Power cycle the unit by unplugging. It will be fine the next restart. Do not turn on the light by pressing the button. If you have a motion sensor on the switch turn it off as well.

finder39 commented 11 months ago

This is happening for me too on a Chamberlain Liftmaster security 1.0

I solved this case. Power cycle the unit by unplugging. It will be fine the next restart. Do not turn on the light by pressing the button. If you have a motion sensor on the switch turn it off as well.

This seems to have worked! Thanks!

Also strange that the light button on the switch doesn't directly turn the light on or off since installed the Ratgdo, but I never used it anyway

NukeThemTillTheyGlow commented 11 months ago

This is happening for me too on a Chamberlain Liftmaster security 1.0

I solved this case. Power cycle the unit by unplugging. It will be fine the next restart. Do not turn on the light by pressing the button. If you have a motion sensor on the switch turn it off as well.

This seems to have worked! Thanks!

Also strange that the light button on the switch doesn't directly turn the light on or off since installed the Ratgdo, but I never used it anyway

So you are using a 2.5 board with ESPHome firmware with a Security 1.0 GDO and it works? I have a 1.0 GDO, its a red button, and having issues with the MQTT firmware, but smoothing sailing with my two Security 2.0 GDO's and Esphome firmware.