Razor-Go

Official node for running stakers in Golang.

Installation

Linux quick start

Install the pre-built razor-go binary directly from GitHub and configure it on the host.

For linux-amd64

curl -sSL https://raw.githubusercontent.com/razor-network/razor-go/main/install.sh | bash

For linux-arm64

export PLATFORM=arm64

curl -sSL https://raw.githubusercontent.com/razor-network/razor-go/main/install.sh | bash

Check installation

razor -v

NOTE: To install a specific version, set the VERSION: environment variable before running the command above.

Docker quick start

One of the quickest ways to get razor-go up and running on your machine is by using Docker:

Create docker network

docker network create razor_network

Start razor-go container

docker run -d -it --entrypoint /bin/sh --network=razor_network --name razor-go -v "$(echo $HOME)"/.razor:/root/.razor razornetwork/razor-go:v2.0.0

NOTE: We leverage Docker bind-mounts to mount the .razor directory, ensuring a shared mount between the host and the container. The .razor directory holds keys to the addresses that we use in razor-go, along with logs and config. We do this to persist data in the host machine, otherwise you would lose your keys once you delete the container.

You need to set a provider before you can operate razor-go cli on docker:

docker exec -it razor-go razor setConfig -p <provider_url>

You can now execute razor-go cli commands by running:

docker exec -it razor-go razor <command>

Prerequisites to building the source

Golang 1.21.1 or later must be installed.
Latest stable version of node is required.
Mac users with Silicon chips should use Node 18.18.0 LTS or later versions
geth and abigen should be installed. (Skip this step if you don't want to fetch the bindings and build from scratch)
solc and jq must be installed.

Building the source

Run npm install to install the node dependencies.
If you want to build from scratch i.e., by fetching the smart contract bindings as well, run npm run build-all.

Note: To build from scratch, geth and abigen must be installed in your system.
If you already have the pkg/bindings you can run npm run build instead of npm run build-all to directly build the binary.
If you want to build the binary without wanting to set the configurations use npm run build-noargs
While building the binary, supply the provider RPC url and the gas multiplier.
The binary will be generated at build/bin.

Commands

Go to the build/bin directory where the razor binary is generated.

cd build/bin

Set Config

There are a set of parameters that are configurable. These include:

Provider: The RPC URL of the provider you are using to connect to the blockchain.
Alternate Provider: This is the secondary RPC URL of the provider used to connect to the blockchain if the primary one is not working.
Gas Multiplier: The value with which the gas price will be multiplied while sending every transaction.
Buffer Size: Buffer size determines, out of all blocks in a state, in how many blocks the voting or any other operation can be performed.
Wait Time: This is the number of seconds the system will wait while voting.
Gas Price: The value of gas price if you want to set manually. If you don't provide any value or simply keep it to 1, the razor client will automatically calculate the optimum gas price and send it.
Log Level: Normally debug logs are not logged into the log file. But if you want you can set logLevel to debug and fetch the debug logs.
Gas Limit: The value with which the gas limit will be multiplied while sending every transaction.
Gas Limit Override: This value would be used as a gas limit for all the transactions instead of estimating for each transaction.
RPC Timeout: This is the threshold number of seconds after which any contract and client calls will time out.
HTTP Timeout: This is the threshold number of seconds after which an HTTP request for a job will time out.
Maximum size of log file: This is the maximum size of log file in MB
Maximum number of backups of log file: This is the maximum number of old log files to retain.
Maximum age of log file: This is the maximum number of days to retain old log files.

The config is set while the build is generated, but if you need to change any of the above parameter, you can use the setConfig command.

razor cli

$ ./razor setConfig --provider <rpc_provider> --gasmultiplier <multiplier_value> --buffer <buffer_percentage> --wait <wait_for_n_blocks> --gasprice <gas_price> --logLevel <debug_or_info> --gasLimit <gas_limit_multiplier> --rpcTimeout <rpc_timeout> --httpTimeout <http_timeout> --logFileMaxSize <file_max_size> --logFileMaxBackups <file_max_backups> --logFileMaxAge <file_max_age>

docker

docker exec -it razor-go razor setConfig --provider <rpc_provider> --alternateProvider <alternate_rpc_provider> --gasmultiplier <multiplier_value> --buffer <buffer_percentage> --wait <wait_for_n_blocks> --gasprice <gas_price> --logLevel <debug_or_info> --gasLimit <gas_limit_multiplier> --rpcTimeout <rpc_timeout> --httpTimeout <http_timeout> --logFileMaxSize <file_max_size> --logFileMaxBackups <file_max_backups> --logFileMaxAge <file_max_age>

Example:

$ ./razor setConfig --provider https://mainnet.skalenodes.com/v1/elated-tan-skat --gasmultiplier 1 --buffer 5 --wait 1 --gasprice 0 --logLevel debug --gasLimit 2 --rpcTimeout 5 --httpTimeout 5 --logFileMaxSize 200 --logFileMaxBackups 10 --logFileMaxAge 60

Besides, setting these parameters in the config, you can use different values for these parameters in various commands. Just add the same flag to any command you want to use and the new config changes will appear for that command.

Example:

$ ./razor vote --address 0x5a0b54d5dc17e0aadc383d2db43b0a0d3e029c4c --gasprice 1

This will cause this particular vote command to run with a gas price of 10.

Razor commands

Create Account

Create an account using the create command. You'll be asked to enter a password that'll be used to encrypt the keystore file.

razor cli

$ ./razor create

Docker

docker exec -it razor-go razor create

Example:

$ ./razor create
Password:

Import Account

If you already have an account and its private key, you can import that account into the razor-go client. To do that, you can use the import command. You'll be asked the private key first and then the password which you want to encrypt your keystore file with.

razor cli

$ ./razor import

docker

docker exec -it razor-go razor import

Example:

$ ./razor import
🔑 Private Key:
Password:

Before staking on Razor Network, please ensure your account has sFUEL and RAZOR. For testnet RAZOR, please contact us on Discord.

Stake

If you have a minimum of 1000 razors in your account, you can stake those using the addStake command.

razor cli

$ ./razor addStake --address <address> --value <value>

docker

docker exec -it razor-go razor addStake --address <address> --value <value>

Example:

$ ./razor addStake --address 0x5a0b54d5dc17e0aadc383d2db43b0a0d3e029c4c --value 1000

Note: --weiRazor flag can be passed to provide values in wei

If you have 1000.25 razors in your account, you can stake those using the stake command with weiRazor flag.

Example:

$ ./razor addStake --address 0x5a0b54d5dc17e0aadc383d2db43b0a0d3e029c4c --value 1000250000000000000000 --weiRazor true

If you have 5678.1001 razors in your account, you can stake those using the stake command with weiRazor flag.

Example:

$ ./razor addStake --address 0x5a0b54d5dc17e0aadc383d2db43b0a0d3e029c4c --value 5678100100000000000000 --weiRazor true

Staker Info

If you want to know the details of a staker, you can use stakerInfo command.

razor cli

$ ./razor stakerInfo --stakerId <staker_id_of_the_staker>

docker

docker exec -it razor-go razor stakerInfo --stakerId <staker_id_of_the_staker>

Example:

$ ./razor stakerInfo --stakerId 2

Set Delegation

If you are a staker, you can accept delegations from delegators and charge them a commission. razor cli

$ ./razor setDelegation --address <address> --status <true_or_false> --commission <commission_percent>

docker

docker exec -it razor-go razor setDelegation --address <address> --status <true_or_false> --commission <commission_percent>

Example:

$ ./razor setDelegation --address 0x5a0b54d5dc17e0aadc383d2db43b0a0d3e029c4c --status true -c 20

Update Commission

If you are a staker and have accepted delegation, you can define your commission rate using this command.

razor cli

$ ./razor updateCommission --address <address> --commission <commission_percent>

docker

docker exec -it razor-go razor updateCommission --address <address> --commission <commission_percent>

Example:

$ ./razor updateCommission --address 0x5a0b54d5dc17e0aadc383d2db43b0a0d3e029c4c --commission 10

Delegate

If you want to become a delegator use the delegate command. The staker whose staker_id is provided, their stake is increased.

razor cli

$ ./razor delegate --address <address> --value <value> --weiRazor <bool> --stakerId <staker_id>

docker

docker exec -it razor-go razor delegate --address <address> --value <value> --weiRazor <bool> --stakerId <staker_id>

Example:

$ ./razor delegate --address 0x5a0b54d5dc17e0aadc383d2db43b0a0d3e029c4c --value 1000 --weiRazor false --stakerId 1

Claim Commission

Stakers can claim the rewards earned from a delegator's pool share as commission using claimCommission

razor cli

$ ./razor claimCommission --address <address>

docker

docker exec -it razor-go razor claimCommission --address <address>

Example:

$ ./razor claimCommission --address 0x5a0b54d5dc17e0aadc383d2db43b0a0d3e029c4c

Vote

You can start voting once you've staked some RAZORs.

razor cli

$ ./razor vote --address <address>

docker

docker exec -it razor-go razor vote --address <address>

Note: To run vote command in background you can use tmux for that.

Run: tmux new -s razor-go

Run vote command

To exit from tmux session: press ctrl+b, release those keys and press d

To list your session: tmux ls

To attach Session back: tmux attach-session -t razor-go

Example:

$ ./razor vote --address 0x5a0b54d5dc17e0aadc383d2db43b0a0d3e029c4c

If you want to claim your bounty automatically after disputing staker, you can just pass --autoClaimBounty flag in your vote command.

If you are running an extra backup node, it is suggested to avoid performing few actions. So to do that you need to pass actions that need to be ignored as a value to flag --backupNode <actions_To_Ignore>. For now, we only support disputeMedians as actions to be ignored as a value for backup node.

$ ./razor vote --address 0x5a0b54d5dc17e0aadc383d2db43b0a0d3e029c4c --backupNode disputeMedians

If you want to report incorrect values, there is a rogue mode available. Just pass an extra flag --rogue to start voting in rogue mode and the client will report wrong medians. The rogueMode key can be used to specify in which particular voting state (commit, reveal) or for which values i.e. medians/revealedIds (medians, missingIds, extraIds, unsortedIds)you want to report incorrect values.

Example:

$ ./razor vote --address 0x5a0b54d5dc17e0aadc383d2db43b0a0d3e029c4c --rogue --rogueMode commit,reveal,medians,missingIds,extraIds,unsortedIds

Unstake

If you wish to unstake your funds, you can run the unstake command.

razor cli

$ ./razor unstake --address <address> --stakerId <staker_id> --value <value> --weiRazor <bool>

docker

docker exec -it razor-go razor unstake --address <address> --stakerId <staker_id> --value <value> --weiRazor <bool>

Example:

$ ./razor unstake --address 0x5a0b54d5dc17e0aadc383d2db43b0a0d3e029c4c --stakerId 1 --value 1000 --weiRazor false

Withdraw

Once unstake has been called, you can withdraw your funds using the initiateWithdraw and unlockWithdraw commands

You need to start the withdrawal process using initiateWithdraw command and once the withdraw lock period is over you can use unlockWithdraw command to get the RZR's back to your account.

razor cli

$ ./razor initiateWithdraw --address <address> --stakerId <staker_id>

$ ./razor unlockWithdraw --address <address> --stakerId <staker_id>

docker

docker exec -it razor-go razor initiateWithdraw --address <address> --stakerId <staker_id>

docker exec -it razor-go razor unlockWithdraw --address <address> --stakerId <staker_id>

Example:

$ ./razor initiateWithdraw --address 0x5a0b54d5dc17e0aadc383d2db43b0a0d3e029c4c --stakerId 1

$ ./razor unlockWithdraw --address 0x5a0b54d5dc17e0aadc383d2db43b0a0d3e029c4c --stakerId 1

Extend Lock

If the withdrawal period has ended, you can use the extendLock command to extend the lock period.

razor cli

$ ./razor extendLock --address <address> --stakerId <staker_id>

docker

docker exec -it razor-go razor extendLock --address <address> --stakerId <staker_id>

Example:

$ ./razor extendLock --address 0x5a0b54d5dc17e0aadc383d2db43b0a0d3e029c4c --stakerId 1

Claim Bounty

If you want to claim your bounty after disputing a rogue staker, you can run claimBounty command

NOTE: Bounty IDs are stored in the .razor directory with filenames in the format YOUR_ADDRESS_disputeData.json file. e.g: 0x2EDc3c6F93e4e20590F480272AB490D2620557xY_disputeData.json

If you know the bountyId, you can pass the value to bountyId flag.

razor cli

$ ./razor claimBounty --address <address> --bountyId <bounty_id>

docker

docker exec -it razor-go razor claimBounty --address <address> --bountyId <bounty_id>

Example:

$ ./razor claimBounty --address 0x5a0b54d5dc17e0aadc383d2db43b0a0d3e029c4c --bountyId 5

You can also run claimBounty command without passing bountyId flag as it will pick up bountyIds associated to your address from the file one at a time.

razor cli

$ ./razor claimBounty --address <address>

docker

docker exec -it razor-go razor claimBounty --address <address>

Transfer

Transfers RAZOR to other accounts.

razor cli

$ ./razor transfer --value <value> --to <transfer_to_address> --from <transfer_from_address>

docker

docker exec -it razor-go razor transfer --value <value> --to <transfer_to_address> --from <transfer_from_address>

Example:

$ ./razor transfer --value 100 --to 0x91b1E6488307450f4c0442a1c35Bc314A505293e --from 0x5a0b54d5dc17e0aadc383d2db43b0a0d3e029c4c

Create Job

Create new jobs using the createJob command.

Note: This command is restricted to users with the "Admin Role"

razor cli

$ ./razor createJob --url <URL> --selector <selector_in_json_or_XHTML_selector_format> --selectorType <0_for_XHTML_or_1_for_JSON> --name <name> --address <address> --power <power> --weight <weight>

docker

docker exec -it razor-go razor createJob --url <URL> --selector <selector_in_json_or_XHTML_selector_format> --selectorType <0_for_XHTML_or_1_for_JSON> --name <name> --address <address> --power <power> --weight <weight>

Example:

$ ./razor createJob --url https://www.alphavantage.co/query\?function\=GLOBAL_QUOTE\&symbol\=MSFT\&apikey\=demo --selector '[`Global Quote`][`05. price`]" --selectorType 1 --name msft --power 2 --address 0x5a0b54d5dc17e0aadc383d2db43b0a0d3e029c4c --weight 32

$ ./razor createJob --address 0x5a0b54d5dc17e0aadc383d2db43b0a0d3e029c4c -n btc_gecko --power 2 -s 'table tbody tr td span[data-coin-id="1"][data-target="price.price"] span' -u https://www.coingecko.com/en --selectorType 0 --weight 100

Create Collection

Create new collections using the createCollection command.

Note: This command is restricted to "Admin Role"

razor cli

$ ./razor createCollection --name <collection_name> --address <address> --jobIds <list_of_job_ids> --aggregation <aggregation_method> --power <power> --tolerance <tolerance>

docker

docker exec -it razor-go razor createCollection --name <collection_name> --address <address> --jobIds <list_of_job_ids> --aggregation <aggregation_method> --power <power> --tolerance <tolerance>

Example:

$ ./razor createCollection --name btcCollectionMean --address 0x5a0b54d5dc17e0aadc383d2db43b0a0d3e029c4c --jobIds 1,2 --aggregation 2 --power 2 --tolerance 200

Modify Collection Status

Modify the active status of a collection using the modifyCollectionStatus command.

Note: This command is restricted to "Admin Role"

razor cli

$ ./razor modifyCollectionStatus --collectionId <collectionId> --address <address> --status <true_or_false>

docker

docker exec -it razor-go razor modifyCollectionStatus --collectionId <collectionId> --address <address> --status <true_or_false>

Example:

$ ./razor modifyCollectionStatus --collectionId 1 --address 0x5a0b54d5dc17e0aadc383d2db43b0a0d3e029c4c --status false

Update Collection

Update the collection using the updateCollection command.

Note: This command is restricted to "Admin Role"

razor cli

$ ./razor updateCollection --collectionId <collection_id> --jobIds <list_of_jobs> --address <address> --aggregation <aggregation_method> --power <power> --tolerance <tolerance>

docker

docker exec -it razor-go razor updateCollection --collectionId <collection_id> --jobIds <list_of_jobs> --address <address> --aggregation <aggregation_method> --power <power> --tolerance <tolerance>

Example:

$ ./razor updateCollection -a 0x5a0b54d5dc17e0aadc383d2db43b0a0d3e029c4c --collectionId 3 --jobIds 1,3 --aggregation 2 --power 4 --tolerance 5

Update Job

Update the existing parameters of the Job using the updateJob command.

Note: This command is restricted to "Admin Role"

razor cli

./razor updateJob --address <address> --jobID <job_Id> -s <selector> --selectorType <selectorType> -u <job_url> --power <power> --weight <weight>

docker

docker exec -it razor-go razor updateJob --address <address> --jobID <job_Id> -s <selector> --selectorType <selectorType> -u <job_url> --power <power> --weight <weight>

Example:

$ ./razor updateJob -a 0x5a0b54d5dc17e0aadc383d2db43b0a0d3e029c4c --jobId 1 -s last -u https://api.gemini.com/v1/pubticker/btcusd --power 2 --weight 10

Job details

Get the list of all jobs with the details like weight, power, Id etc.

Example:

razor cli

$ ./razor jobList

docker

docker exec -it razor-go razor jobList

Collection details

Get the list of all collections with the details like power, Id, name etc.

Example:

razor cli

$ ./razor collectionList

docker

docker exec -it razor-go razor collectionList

Note : All commands include an additional --password flag. You can specify a file path to retrieve the password.

Expose Metrics

Expose Prometheus-based metrics for monitoring

Without TLS

$ ./razor setConfig --exposeMetrics 2112

With TLS

$ ./razor setConfig --exposeMetrics 2112 --certFile /cert/file/path/certfile.crt --certKey key/file/path/keyfile.key

docker

Expose Metrics without TLS

docker exec -it razor-go razor setConfig --exposeMetrics 2112

Expose Metrics with TLS

docker exec -it razor-go razor setConfig --exposeMetrics 2112 --certFile /cert/file/path/certfile.crt --certKey key/file/path/keyfile.key

Configuration

Clone the repo and setup monitoring and alerting using Prometheus/Grafana

git clone https://github.com/razor-network/monitoring.git
cd monitoring

If your staker runs via binary, then
1. In ./configs/prometheus.yml, replace "razor-go:2112" with "<private/public address of host>:2112"
For alerting, you can add a webhook in ./configs/alertmanager.yml. Replace http://127.0.0.1:5001/ with your webhook URL. This will send an alert every 5 minutes if the metrics stop.
If you are running multiple stakers and want to monitor via single grafana dashboard
1. You need to update ./config/prometheus.yml, add new target block where job_name: "razor-go"
```
- targets: ["<second-host-address>:2112"]
  labels:
    staker: "<staker-name>"
```
2. Restart vmagent service docker-compose restart vmagent
  Start monitoring stack
You can spin all agents at once via
```
docker-compose up -d
```
Can check the status of each service via
```
docker-compose ps
```
You can open grafana at <private/public address of host>:3000, and get
1. Can checkout Razor dashboard to monitor your staker.
2. Insight of host metrics at Node Exporter Full dashboard.
3. Containers Insight at Docker and OS metrics ( cadvisor, node_exporter ) dashboard.
4. Can monitor alerts at Alertmanager dashboard.

NOTE: Configure firewall for port 3000 on your host to access grafana.

Troubleshoot Alerting

In docker-compose.yml uncomment ports for alertmanager and vmalert.
Configure firewall to allow access to ports 8880 and 9093.
Check you get alerts on vmalert via http://<host_address>:8880/vmalert/alerts. vmalert is configured to scrap in every 2min.
If you see alert in vmalert then look into alertmanager http://<host_address>:9093/#/alerts?, if you see alerts in there but you didn't get one then probably you need to check your weebhook.

Configuration

Clone repo and setup monitoring and alerting using Prometheus/Grafana

git clone https://github.com/razor-network/monitoring.git
cd monitoring

If your staker is running via binary, then
1. In ./configs/prometheus.yml, replace "razor-go:2112" with "<private/public address of host>:2112"
For alerting you can add webhook in ./configs/alertmanager.yml, replace http://127.0.0.1:5001/ with your webhook URL. This will send you an alert in every 5min if metrics stops.
If you are running multiple stakers and want to monitor via single grafana dashboard
1. You need to update ./config/prometheus.yml, add new target block where job_name: "razor-go"
```
- targets: ["<second-host-address>:2112"]
 labels:
   staker: "<staker-name>"
```
2. Restart vmagent service docker-compose restart vmagent

Start monitoring stack

You can spin all agents at once via
```
docker-compose up -d
```
Can check the status of each service via
```
docker-compose ps
```
You can open grafana at <private/public address of host>:3000, and get
1. Can checkout Razor dashboard to monitor your staker.
2. Insight of host metrics at Node Exporter Full dashboard.
3. Containers Insight at Docker and OS metrics ( cadvisor, node_exporter ) dashboard.
4. Can monitor alerts at Alertmanager dashboard.

NOTE: Configure firewall for port 3000 on your host to access grafana.

Troubleshoot Alerting

In docker-compose.yml uncomment ports for alertmanager and vmalert.
Configure firewall to allow access to ports 8880 and 9093.
Check you get alerts on vmalert via http://<host_address>:8880/vmalert/alerts. vmalert is configured to scrap in every 2min.
If you see alert in vmalert then look into alertmanager http://<host_address>:9093/#/alerts?, if you see alerts in there but you didn't get one then probably you need to check your weebhook.

Override Job and Adding Your Custom Jobs

Job URLs act as placeholders indicating where values should be fetched from. There is a chance that these URLs might either fail, or get razor nodes blacklisted, etc. You can override the existing job and also add your custom jobs by adding assets.json file in .razor directory so that razor-nodes can fetch data directly from the provided jobs.

Shown below is an example of how your assets.json file should be -

{
    "assets": {
      "collection": {
        "ETHUSD": {
          "official jobs": {
            "1": {
              "URL": "https://data.messari.io/api/v1/assets/eth/metrics",
              "selector": "[`data`][`market_data`][`price_usd`]",
              "power": 2,
              "weight": 2
            }
          },
          "custom jobs": [
            {
              "URL": "https://api.kucoin.com/api/v1/prices?base=USD&currencies=ETH",
              "name": "eth_kucoin_usd",
              "selector": "data.ETH",
              "power": 3,
              "weight": 1
            },
            {
              "URL": {
                "type": "POST",
                "url": "https://rpc.ankr.com/eth",
                "body": {
                  "jsonrpc": "2.0",
                  "method": "eth_call",
                  "params": [
                    {
                      "to": "0xb27308f9f90d607463bb33ea1bebb41c27ce5ab6",
                      "data": "0xf7729d43000000000000000000000000c02aaa39b223fe8d0a0e5c4f27ead9083c756cc2000000000000000000000000a0b86991c6218b36c1d19d4a2e9eb0ce3606eb480000000000000000000000000000000000000000000000000000000000000bb80000000000000000000000000000000000000000000000000de0b6b3a76400000000000000000000000000000000000000000000000000000000000000000000"
                    },
                    "latest"
                  ],
                  "id": 5
                },
                "header": {
                  "content-type": "application/json"
                },
                "returnType": "hex"
              },
              "name": "eth_postJob_usd",
              "power": -4,
              "selectorType": 0,
              "selector": "result",
              "weight": 1
            }
          ]
        }
      }
    }
  }

Breaking down into components

The existing jobs that you want to override should be included in official jobs and fields like URL, selector should be replaced with your provided inputs respectively.

In the above example for the collection ethCollectionMean, the job with jobId:1 is overriden by provided URL, selector, power and weight.

"official jobs": {
          "1": {
            "URL": "https://data.messari.io/api/v1/assets/eth/metrics",
            "selector": "[`data`][`market_data`][`price_usd`]",
            "power": 2,
            "weight": 2
          },

Additional jobs that you want to add to a collection should be added in custom jobs field with their respective URLs and selectors.

In the above example for the collection ethCollectionMean new custom jobs are as shown below,

Job following GET request having URL https://api.kucoin.com/api/v1/prices?base=USD&currencies=ETH and
Job following POST request having URL "https://rpc.ankr.com/eth" with respective body and header will be added in jobs array.

If any custom job requires authentication via an API key or headers, the staker can export the key using the method shown below:

If the job is:

https://api.gemini.com/v1/pubticker/v1/exchangerate/BTC?apikey=YOUR_AUTH_KEY

you can change the above job url to

https://api.gemini.com/v1/pubticker/v1/exchangerate/BTC?apikey=${AUTH_KEY}

Now staker needs to use the same keyword defined inside ${...} as an environment variable using export command and assigning it a value as users API key as shown below,

export AUTH_KEY="YOUR_AUTH_KEY"

Logs

Users can pass a separate --logFile flag followed by any desired log file name when executing a command. The logs will be stored in .razor/logs directory.

razor cli

$ ./razor addStake --address <address> --value <value> --logFile stakingLogs

docker

docker exec -it razor-go razo addStake --address <address> --value <value> --logFile stakingLogs

The logs for the above command will be stored at the "$HOME/.razor/logs/stakingLogs.log" path

razor cli

$ ./razor delegate --address <address> --value <value> --weiRazor <bool> --stakerId <staker_id> --logFile delegationLogs

docker

docker exec -it razor-go razo delegate --address <address> --value <value> --weiRazor <bool> --stakerId <staker_id> --logFile delegationLogs

The logs for above command will be stored at "$HOME/.razor/logs/delegationLogs.log" path

Note: If the user runs multiple commands with the same log file name all the logs will be appended in the same log file.

Contract Addresses

This command provides the list of contract addresses.

razor cli

$ ./razor contractAddresses

docker

docker exec -it razor-go razor contractAddresses

Example:

$ ./razor contractAddresses

Setting up razor-go and commands using docker-compose

Must have docker and docker-compose installed
Building the source docker-compose build
Create razor.yaml at $HOME/.razor/
```
vi $HOME/.razor/razor.yaml
```

Add in razor.yaml and use :wq to exit form editor

buffer: 20
gaslimit: 2
gasmultiplier: 1
gasprice: 0
provider: <rpc-url>
wait: 30

Create account , and note address.

docker-compose run razor-go /usr
/local/bin/razor create

Import account

docker-compose run razor-go /usr/local/bin/razor import

Get some RAZOR and sFUEL token (or Token of respective RPC) to this address

Start Staking

#Provide password through CLI
docker-compose run razor-go /usr/local/bin/razor addStake --address <address> --value 50000

  #Provide password through File

    #Create file and put password string
      vi ~/.razor/pass
    #Start Staking
      docker-compose run razor-go /usr/local/bin/razor addStake --address <address> --value 50000 --password /root/.razor/pass

To Start Voting,

Provide password through CLI

# Run process in foreground and provide password through cli
docker-compose run razor-go /usr/local/bin/razor vote --address <address>

# Run process in background and provide password through file
docker-compose run -d razor-go /usr/local/bin/razor vote --address <address> --password /root/.razor/pass

docker-compose up -d

Enable Delegation

#Provide password with cli
docker-compose run razor-go /usr/local/bin/razor setDelegation --address <address> --status true --commission 10

#provide password through file
docker-compose run razor-go /usr/local/bin/razor setDelegation --address <address> --status true --commission 10 --password /root/.razor/pass

Contribute to razor-go

We would really appreciate your contribution. To see our contribution guideline

razor-network / oracle-node

readme

Razor-Go

Installation

Linux quick start

Docker quick start

Prerequisites to building the source

Building the source

Commands

Set Config

Razor commands

Create Account

Import Account

Stake

Staker Info

Set Delegation

Update Commission

Delegate

Claim Commission

Vote

Unstake

Withdraw

Extend Lock

Claim Bounty

Transfer

Create Job

Create Collection

Modify Collection Status

Update Collection

Update Job

Job details

Collection details

Expose Metrics

Without TLS

With TLS

Expose Metrics without TLS

Expose Metrics with TLS

Configuration

Start monitoring stack

Troubleshoot Alerting

Configuration

Start monitoring stack

Troubleshoot Alerting

Override Job and Adding Your Custom Jobs

Logs

Contract Addresses

Setting up razor-go and commands using docker-compose

Contribute to razor-go