Closed TheKayneGame closed 6 years ago
which board? Try a more reliable 5V PSU, usually 2A minimum is required
Orange Pi Zero Plus 2 H3, and it works them i'm just connected to an USB adaptor But it does not work when i connect it to the 5v pins. The Device comes to life, it tries to do the u boot stuff but gets stuck with UBS Bus
I cannot reproduce this issue. My ZeroPlus2 H3 works fine from pins 1 and 2 (5V and GND).
This is the result i get when i connect to pin 1 and 2. waiting does no good...
This behavior is similar to booting with analog TV settings, HDMI source is active and cable is present Otherwise, still not reproducible
MY system is stuck in kernel im running latest retrorangepi. it works when connected to usb but not when getting 5v from bench psu.