search

roleoroleo / yi-hack-Allwinner-v2

Custom firmware for Yi 1080p camera based on Allwinner platform
MIT License
852 stars 97 forks source link

y291ga cannot connect to Synology Surveillance Station (incorrect credentials) on 0.3.1 #816

Closed maakdan closed 3 months ago

maakdan commented 9 months ago

Hello.

I just installed 0.3.1 on my 0.2.8 y291ga camera, and as I update the onvif settings in Synology Surveillance Station and re-login, the correct credentials are rejected by the camera and I can't connect to the onvif rtsp stream.

I need help. Thanks.

roleoroleo commented 9 months ago

Did it work with 0.2.8? Could you test it with Onvif Device Manager?

Please enable debug and send me the log file.

# echo 5 > /tmp/onvif_simple_server.debug
... run your onvif client
# cat /tmp/onvif_simple_server.log
cargnellogiacomo commented 8 months ago

Hi,

I do have the same issue after upgrading my Yi DomeU from 0.3.0 to 0.3.1 (h52ga). The Synology Surveillance Station does not accept the credentials and it keeps saying that they are wrong (it works well in another platforms. Any ideas? Regards

Giacomo

roleoroleo commented 8 months ago

It's not a credentials problem. The error reported by Synology is not correct. Please try this version: y291ga_0.3.1.tar.gz

There is a new configuration page with some compatibility options. immagine

cargnellogiacomo commented 8 months ago

It's not a credentials problem. The error reported by Synology is not correct. Please try this version: y291ga_0.3.1.tar.gz

There is a new configuration page with some compatibility options. immagine

Do you have also an improved version for h52ga to test?

roleoroleo commented 8 months ago

Here it is: h52ga_0.3.1.tar.gz

cargnellogiacomo commented 7 months ago

Here it is: h52ga_0.3.1.tar.gz

I installed it but I have the same issue. Also the discovery does not work.

roleoroleo commented 7 months ago

Try to enable/disable the options "Fault response if unknown request" and "Synology NVR compatibility". If it doesn't work, please capture the network traffic between the cam and the NVR and send me the pcap file.

cvc90 commented 7 months ago

I have the same problem as discussed here, my camera is a h60ga, could you send me the new version with the new ONVIF configuration options? Thanks

github-actions[bot] commented 4 months ago

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.