no color when using rainbow.

[crazy-canux]

my env: ssh to ubuntu18.04 from mobaxtern. mobaxtern: v21.1 os: ubuntu18.04 zsh: 5.7.1

no color when using rainbow.

.zshrc

export TERM=xterm-256color
# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
# Initialization code that may require console input (password prompts, [y/n]
# confirmations, etc.) must go above this block; everything else may go below.
if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
  source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
fi

# If you come from bash you might have to change your $PATH.
# export PATH=$HOME/bin:/usr/local/bin:$PATH

# Path to your oh-my-zsh installation.
export ZSH="$HOME/.oh-my-zsh"

ZSH_THEME="powerlevel10k/powerlevel10k"

......

# To customize prompt, run `p10k configure` or edit ~/.p10k.zsh.
[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh

.p10k.zsh

# Generated by Powerlevel10k configuration wizard on 2022-03-29 at 07:25 BST.
# Based on romkatv/powerlevel10k/config/p10k-rainbow.zsh, checksum 62500.
# Wizard options: nerdfont-complete + powerline, small icons, rainbow, unicode,
# 24h time, angled separators, blurred heads, blurred tails, 2 lines, dotted,
# full frame, darkest-ornaments, compact, many icons, concise, transient_prompt,
# instant_prompt=verbose.
# Type `p10k configure` to generate another config.
#
# Generated by Powerlevel10k configuration wizard on 2022-03-29 at 04:02 BST.
# Based on romkatv/powerlevel10k/config/p10k-lean-8colors.zsh, checksum 58293.
# Wizard options: nerdfont-complete + powerline, small icons, lean_8colors, unicode,
# 24h time, 2 lines, disconnected, full frame, green-ornaments, compact, many icons,
# concise, transient_prompt, instant_prompt=verbose.
# Type `p10k configure` to generate another config.
#
# Config for Powerlevel10k with 8-color lean prompt style. Type `p10k configure` to generate
# your own config based on it.
#
# Tip: Looking for a nice color? Here's a one-liner to print colormap.
#
#   for i in {0..255}; do print -Pn "%K{$i}  %k%F{$i}${(l:3::0:)i}%f " ${${(M)$((i%6)):#3}:+$'\n'}; done

# Temporarily change options.
'builtin' 'local' '-a' 'p10k_config_opts'
[[ ! -o 'aliases'         ]] || p10k_config_opts+=('aliases')
[[ ! -o 'sh_glob'         ]] || p10k_config_opts+=('sh_glob')
[[ ! -o 'no_brace_expand' ]] || p10k_config_opts+=('no_brace_expand')
'builtin' 'setopt' 'no_aliases' 'no_sh_glob' 'brace_expand'

() {
  emulate -L zsh -o extended_glob

  # Unset all configuration options. This allows you to apply configuration changes without
  # restarting zsh. Edit ~/.p10k.zsh and type `source ~/.p10k.zsh`.
  unset -m '(POWERLEVEL9K_*|DEFAULT_USER)~POWERLEVEL9K_GITSTATUS_DIR'

  # Zsh >= 5.1 is required.
  autoload -Uz is-at-least && is-at-least 5.1 || return

  # The list of segments shown on the left. Fill it with the most important segments.
  typeset -g POWERLEVEL9K_LEFT_PROMPT_ELEMENTS=(
    # =========================[ Line #1 ]=========================
    os_icon                 # os identifier
    dir                     # current directory
    vcs                     # git status
    # =========================[ Line #2 ]=========================
    newline                 # \n
    prompt_char             # prompt symbol
  )

  # The list of segments shown on the right. Fill it with less important segments.
  # Right prompt on the last prompt line (where you are typing your commands) gets
  # automatically hidden when the input line reaches it. Right prompt above the
  # last prompt line gets hidden if it would overlap with left prompt.
  typeset -g POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS=(
    # =========================[ Line #1 ]=========================
    status                  # exit code of the last command
    command_execution_time  # duration of the last command
    background_jobs         # presence of background jobs
    direnv                  # direnv status (https://direnv.net/)
    asdf                    # asdf version manager (https://github.com/asdf-vm/asdf)
    virtualenv              # python virtual environment (https://docs.python.org/3/library/venv.html)
    anaconda                # conda environment (https://conda.io/)
    pyenv                   # python environment (https://github.com/pyenv/pyenv)
    goenv                   # go environment (https://github.com/syndbg/goenv)
    nodenv                  # node.js version from nodenv (https://github.com/nodenv/nodenv)
    nvm                     # node.js version from nvm (https://github.com/nvm-sh/nvm)
    nodeenv                 # node.js environment (https://github.com/ekalinin/nodeenv)
    node_version          # node.js version
    go_version            # go version (https://golang.org)
    # rust_version          # rustc version (https://www.rust-lang.org)
    # dotnet_version        # .NET version (https://dotnet.microsoft.com)
    # php_version           # php version (https://www.php.net/)
    # laravel_version       # laravel php framework version (https://laravel.com/)
    # java_version          # java version (https://www.java.com/)
    package               # name@version from package.json (https://docs.npmjs.com/files/package.json)
    # rbenv                   # ruby version from rbenv (https://github.com/rbenv/rbenv)
    # rvm                     # ruby version from rvm (https://rvm.io)
    # fvm                     # flutter version management (https://github.com/leoafarias/fvm)
    # luaenv                  # lua version from luaenv (https://github.com/cehoffman/luaenv)
    jenv                    # java version from jenv (https://github.com/jenv/jenv)
    plenv                   # perl version from plenv (https://github.com/tokuhirom/plenv)
    perlbrew                # perl version from perlbrew (https://github.com/gugod/App-perlbrew)
    # phpenv                  # php version from phpenv (https://github.com/phpenv/phpenv)
    # scalaenv                # scala version from scalaenv (https://github.com/scalaenv/scalaenv)
    # haskell_stack           # haskell version from stack (https://haskellstack.org/)
    kubecontext             # current kubernetes context (https://kubernetes.io/)
    terraform               # terraform workspace (https://www.terraform.io)
    # terraform_version     # terraform version (https://www.terraform.io)
    aws                     # aws profile (https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-profiles.html)
    aws_eb_env              # aws elastic beanstalk environment (https://aws.amazon.com/elasticbeanstalk/)
    azure                   # azure account name (https://docs.microsoft.com/en-us/cli/azure)
    # gcloud                  # google cloud cli account and project (https://cloud.google.com/)
    # google_app_cred         # google application credentials (https://cloud.google.com/docs/authentication/production)
    toolbox                 # toolbox name (https://github.com/containers/toolbox)
    context                 # user@hostname
    nordvpn                 # nordvpn connection status, linux only (https://nordvpn.com/)
    ranger                  # ranger shell (https://github.com/ranger/ranger)
    nnn                     # nnn shell (https://github.com/jarun/nnn)
    xplr                    # xplr shell (https://github.com/sayanarijit/xplr)
    vim_shell               # vim shell indicator (:sh)
    midnight_commander      # midnight commander shell (https://midnight-commander.org/)
    nix_shell               # nix shell (https://nixos.org/nixos/nix-pills/developing-with-nix-shell.html)
    # vpn_ip                # virtual private network indicator
    load                  # CPU load
    disk_usage            # disk usage
    ram                   # free RAM
    swap                  # used swap
    todo                    # todo items (https://github.com/todotxt/todo.txt-cli)
    timewarrior             # timewarrior tracking status (https://timewarrior.net/)
    taskwarrior             # taskwarrior task count (https://taskwarrior.org/)
    time                    # current time
    # =========================[ Line #2 ]=========================
    newline                 # \n
    # ip                    # ip address and bandwidth usage for a specified network interface
    # public_ip             # public IP address
    # proxy                 # system-wide http/https/ftp proxy
    battery               # internal battery
    wifi                  # wifi speed
    # example               # example user-defined segment (see prompt_example function below)
  )

  # Defines character set used by powerlevel10k. It's best to let `p10k configure` set it for you.
  typeset -g POWERLEVEL9K_MODE=nerdfont-complete
  # When set to `moderate`, some icons will have an extra space after them. This is meant to avoid
  # icon overlap when using non-monospace fonts. When set to `none`, spaces are not added.
  typeset -g POWERLEVEL9K_ICON_PADDING=none

  # Basic style options that define the overall look of your prompt. You probably don't want to
  # change them.
  typeset -g POWERLEVEL9K_BACKGROUND=                            # transparent background
  typeset -g POWERLEVEL9K_{LEFT,RIGHT}_{LEFT,RIGHT}_WHITESPACE=  # no surrounding whitespace
  typeset -g POWERLEVEL9K_{LEFT,RIGHT}_SUBSEGMENT_SEPARATOR=' '  # separate segments with a space
  typeset -g POWERLEVEL9K_{LEFT,RIGHT}_SEGMENT_SEPARATOR=        # no end-of-line symbol

  # When set to true, icons appear before content on both sides of the prompt. When set
  # to false, icons go after content. If empty or not set, icons go before content in the left
  # prompt and after content in the right prompt.
  #
  # You can also override it for a specific segment:
  #
  #   POWERLEVEL9K_STATUS_ICON_BEFORE_CONTENT=false
  #
  # Or for a specific segment in specific state:
  #
  #   POWERLEVEL9K_DIR_NOT_WRITABLE_ICON_BEFORE_CONTENT=false
  typeset -g POWERLEVEL9K_ICON_BEFORE_CONTENT=true

  # Add an empty line before each prompt.
  typeset -g POWERLEVEL9K_PROMPT_ADD_NEWLINE=false

  # Connect left prompt lines with these symbols.
  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_PREFIX='%238F╭─'
  typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_PREFIX='%238F├─'
  typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_PREFIX='%238F╰─'
  # Connect right prompt lines with these symbols.
  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_SUFFIX='%238F─╮'
  typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_SUFFIX='%238F─┤'
  typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_SUFFIX='%238F─╯'

  # The left end of left prompt.
  typeset -g POWERLEVEL9K_LEFT_PROMPT_FIRST_SEGMENT_START_SYMBOL='░▒▓'
  # The right end of right prompt.
  typeset -g POWERLEVEL9K_RIGHT_PROMPT_LAST_SEGMENT_END_SYMBOL='▓▒░'

  # Ruler, a.k.a. the horizontal line before each prompt. If you set it to true, you'll
  # probably want to set POWERLEVEL9K_PROMPT_ADD_NEWLINE=false above and
  # POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR=' ' below.
  typeset -g POWERLEVEL9K_SHOW_RULER=false
  typeset -g POWERLEVEL9K_RULER_CHAR='─'        # reasonable alternative: '·'
  typeset -g POWERLEVEL9K_RULER_FOREGROUND=238

  # Filler between left and right prompt on the first prompt line. You can set it to '·' or '─'
  # to make it easier to see the alignment between left and right prompt and to separate prompt
  # from command output. It serves the same purpose as ruler (see above) without increasing
  # the number of prompt lines. You'll probably want to set POWERLEVEL9K_SHOW_RULER=false
  # if using this. You might also like POWERLEVEL9K_PROMPT_ADD_NEWLINE=false for more compact
  # prompt.
  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR='·'
  if [[ $POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR != ' ' ]]; then
    # The color of the filler.
    typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_FOREGROUND=238
    # Add a space between the end of left prompt and the filler.
    typeset -g POWERLEVEL9K_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL='▓▒░'
    # Add a space between the filler and the start of right prompt.
    typeset -g POWERLEVEL9K_RIGHT_PROMPT_FIRST_SEGMENT_START_SYMBOL='░▒▓'
    # Start filler from the edge of the screen if there are no left segments on the first line.
    typeset -g POWERLEVEL9K_EMPTY_LINE_LEFT_PROMPT_FIRST_SEGMENT_END_SYMBOL='%{%}'
    # End filler on the edge of the screen if there are no right segments on the first line.
    typeset -g POWERLEVEL9K_EMPTY_LINE_RIGHT_PROMPT_FIRST_SEGMENT_START_SYMBOL='%{%}'
  fi

  #################################[ os_icon: os identifier ]##################################
  # OS identifier color.
  typeset -g POWERLEVEL9K_OS_ICON_FOREGROUND=
  # Custom icon.
  # typeset -g POWERLEVEL9K_OS_ICON_CONTENT_EXPANSION='⭐'

  ################################[ prompt_char: prompt symbol ]################################
  # Green prompt symbol if the last command succeeded.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_OK_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=2
  # Red prompt symbol if the last command failed.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_ERROR_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=1
  # Default prompt symbol.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIINS_CONTENT_EXPANSION='❯'
  # Prompt symbol in command vi mode.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VICMD_CONTENT_EXPANSION='❮'
  # Prompt symbol in visual vi mode.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIVIS_CONTENT_EXPANSION='V'
  # Prompt symbol in overwrite vi mode.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIOWR_CONTENT_EXPANSION='▶'
  typeset -g POWERLEVEL9K_PROMPT_CHAR_OVERWRITE_STATE=true
  # No line terminator if prompt_char is the last segment.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=''
  # No line introducer if prompt_char is the first segment.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_FIRST_SEGMENT_START_SYMBOL=

  ##################################[ dir: current directory ]##################################
  # Default current directory color.
  typeset -g POWERLEVEL9K_DIR_FOREGROUND=4
  # If directory is too long, shorten some of its segments to the shortest possible unique
  # prefix. The shortened directory can be tab-completed to the original.
  typeset -g POWERLEVEL9K_SHORTEN_STRATEGY=truncate_to_unique
  # Replace removed segment suffixes with this symbol.
  typeset -g POWERLEVEL9K_SHORTEN_DELIMITER=
  # Color of the shortened directory segments.
  typeset -g POWERLEVEL9K_DIR_SHORTENED_FOREGROUND=4
  # Color of the anchor directory segments. Anchor segments are never shortened. The first
  # segment is always an anchor.
  typeset -g POWERLEVEL9K_DIR_ANCHOR_FOREGROUND=4
  # Set to true to display anchor directory segments in bold.
  typeset -g POWERLEVEL9K_DIR_ANCHOR_BOLD=false
  # Don't shorten directories that contain any of these files. They are anchors.
  local anchor_files=(
    .bzr
    .citc
    .git
    .hg
    .node-version
    .python-version
    .go-version
    .ruby-version
    .lua-version
    .java-version
    .perl-version
    .php-version
    .tool-version
    .shorten_folder_marker
    .svn
    .terraform
    CVS
    Cargo.toml
    composer.json
    go.mod
    package.json
    stack.yaml
  )
  typeset -g POWERLEVEL9K_SHORTEN_FOLDER_MARKER="(${(j:|:)anchor_files})"
  # If set to "first" ("last"), remove everything before the first (last) subdirectory that contains
  # files matching $POWERLEVEL9K_SHORTEN_FOLDER_MARKER. For example, when the current directory is
  # /foo/bar/git_repo/nested_git_repo/baz, prompt will display git_repo/nested_git_repo/baz (first)
  # or nested_git_repo/baz (last). This assumes that git_repo and nested_git_repo contain markers
  # and other directories don't.
  #
  # Optionally, "first" and "last" can be followed by ":<offset>" where <offset> is an integer.
  # This moves the truncation point to the right (positive offset) or to the left (negative offset)
  # relative to the marker. Plain "first" and "last" are equivalent to "first:0" and "last:0"
  # respectively.
  typeset -g POWERLEVEL9K_DIR_TRUNCATE_BEFORE_MARKER=false
  # Don't shorten this many last directory segments. They are anchors.
  typeset -g POWERLEVEL9K_SHORTEN_DIR_LENGTH=1
  # Shorten directory if it's longer than this even if there is space for it. The value can
  # be either absolute (e.g., '80') or a percentage of terminal width (e.g, '50%'). If empty,
  # directory will be shortened only when prompt doesn't fit or when other parameters demand it
  # (see POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS and POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT below).
  # If set to `0`, directory will always be shortened to its minimum length.
  typeset -g POWERLEVEL9K_DIR_MAX_LENGTH=80
  # When `dir` segment is on the last prompt line, try to shorten it enough to leave at least this
  # many columns for typing commands.
  typeset -g POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS=40
  # When `dir` segment is on the last prompt line, try to shorten it enough to leave at least
  # COLUMNS * POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT * 0.01 columns for typing commands.
  typeset -g POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT=50
  # If set to true, embed a hyperlink into the directory. Useful for quickly
  # opening a directory in the file manager simply by clicking the link.
  # Can also be handy when the directory is shortened, as it allows you to see
  # the full directory that was used in previous commands.
  typeset -g POWERLEVEL9K_DIR_HYPERLINK=false

  # Enable special styling for non-writable directories. See POWERLEVEL9K_LOCK_ICON and
  # POWERLEVEL9K_DIR_CLASSES below.
  typeset -g POWERLEVEL9K_DIR_SHOW_WRITABLE=v2

  # Enable special styling for non-writable and non-existent directories. See POWERLEVEL9K_LOCK_ICON
  # and POWERLEVEL9K_DIR_CLASSES below.
  typeset -g POWERLEVEL9K_DIR_SHOW_WRITABLE=v3

  # The default icon shown next to non-writable and non-existent directories when
  # POWERLEVEL9K_DIR_SHOW_WRITABLE is set to v3.
  # typeset -g POWERLEVEL9K_LOCK_ICON='⭐'

  # POWERLEVEL9K_DIR_CLASSES allows you to specify custom icons and colors for different
  # directories. It must be an array with 3 * N elements. Each triplet consists of:
  #
  #   1. A pattern against which the current directory ($PWD) is matched. Matching is done with
  #      extended_glob option enabled.
  #   2. Directory class for the purpose of styling.
  #   3. An empty string.
  #
  # Triplets are tried in order. The first triplet whose pattern matches $PWD wins.
  #
  # If POWERLEVEL9K_DIR_SHOW_WRITABLE is set to v3, non-writable and non-existent directories
  # acquire class suffix _NOT_WRITABLE and NON_EXISTENT respectively.
  #
  # For example, given these settings:
  #
  #   typeset -g POWERLEVEL9K_DIR_CLASSES=(
  #     '~/work(|/*)'  WORK     ''
  #     '~(|/*)'       HOME     ''
  #     '*'            DEFAULT  '')
  #
  # Whenever the current directory is ~/work or a subdirectory of ~/work, it gets styled with one
  # of the following classes depending on its writability and existence: WORK, WORK_NOT_WRITABLE or
  # WORK_NON_EXISTENT.
  #
  # Simply assigning classes to directories doesn't have any visible effects. It merely gives you an
  # option to define custom colors and icons for different directory classes.
  #
  #   # Styling for WORK.
  #   typeset -g POWERLEVEL9K_DIR_WORK_VISUAL_IDENTIFIER_EXPANSION='⭐'
  #   typeset -g POWERLEVEL9K_DIR_WORK_FOREGROUND=4
  #   typeset -g POWERLEVEL9K_DIR_WORK_SHORTENED_FOREGROUND=4
  #   typeset -g POWERLEVEL9K_DIR_WORK_ANCHOR_FOREGROUND=4
  #
  #   # Styling for WORK_NOT_WRITABLE.
  #   typeset -g POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_VISUAL_IDENTIFIER_EXPANSION='⭐'
  #   typeset -g POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_FOREGROUND=4
  #   typeset -g POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_SHORTENED_FOREGROUND=4
  #   typeset -g POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_ANCHOR_FOREGROUND=4#
  #
  #   Styling for WORK_NON_EXISTENT.
  #   typeset -g POWERLEVEL9K_DIR_WORK_NON_EXISTENT_VISUAL_IDENTIFIER_EXPANSION='⭐'
  #   typeset -g POWERLEVEL9K_DIR_WORK_NON_EXISTENT_FOREGROUND=4
  #   typeset -g POWERLEVEL9K_DIR_WORK_NON_EXISTENT_SHORTENED_FOREGROUND=4
  #   typeset -g POWERLEVEL9K_DIR_WORK_NON_EXISTENT_ANCHOR_FOREGROUND=4
  #
  # If a styling parameter isn't explicitly defined for some class, it falls back to the classless
  # parameter. For example, if POWERLEVEL9K_DIR_WORK_NOT_WRITABLE_FOREGROUND is not set, it falls
  # back to POWERLEVEL9K_DIR_FOREGROUND.
  #
  # typeset -g POWERLEVEL9K_DIR_CLASSES=()

  # Custom prefix.
  # typeset -g POWERLEVEL9K_DIR_PREFIX='%fin '

  #####################################[ vcs: git status ]######################################
  # Branch icon. Set this parameter to '\uF126 ' for the popular Powerline branch icon.
  typeset -g POWERLEVEL9K_VCS_BRANCH_ICON='\uF126 '

  # Untracked files icon. It's really a question mark, your font isn't broken.
  # Change the value of this parameter to show a different icon.
  typeset -g POWERLEVEL9K_VCS_UNTRACKED_ICON='?'

  # Formatter for Git status.
  #
  # Example output: master wip ⇣42⇡42 *42 merge ~42 +42 !42 ?42.
  #
  # You can edit the function to customize how Git status looks.
  #
  # VCS_STATUS_* parameters are set by gitstatus plugin. See reference:
  # https://github.com/romkatv/gitstatus/blob/master/gitstatus.plugin.zsh.
  function my_git_formatter() {
    emulate -L zsh

    if [[ -n $P9K_CONTENT ]]; then
      # If P9K_CONTENT is not empty, use it. It's either "loading" or from vcs_info (not from
      # gitstatus plugin). VCS_STATUS_* parameters are not available in this case.
      typeset -g my_git_format=$P9K_CONTENT
      return
    fi

    if (( $1 )); then
      # Styling for up-to-date Git status.
      local       meta='%f'   # default foreground
      local      clean='%2F'  # green foreground
      local   modified='%3F'  # yellow foreground
      local  untracked='%4F'  # blue foreground
      local conflicted='%1F'  # red foreground
    else
      # Styling for incomplete and stale Git status.
      local       meta='%f'  # default foreground
      local      clean='%f'  # default foreground
      local   modified='%f'  # default foreground
      local  untracked='%f'  # default foreground
      local conflicted='%f'  # default foreground
    fi

    local res

    if [[ -n $VCS_STATUS_LOCAL_BRANCH ]]; then
      local branch=${(V)VCS_STATUS_LOCAL_BRANCH}
      # If local branch name is at most 32 characters long, show it in full.
      # Otherwise show the first 12 … the last 12.
      # Tip: To always show local branch name in full without truncation, delete the next line.
      (( $#branch > 32 )) && branch[13,-13]="…"  # <-- this line
      res+="${clean}${(g::)POWERLEVEL9K_VCS_BRANCH_ICON}${branch//\%/%%}"
    fi

    if [[ -n $VCS_STATUS_TAG
          # Show tag only if not on a branch.
          # Tip: To always show tag, delete the next line.
          && -z $VCS_STATUS_LOCAL_BRANCH  # <-- this line
        ]]; then
      local tag=${(V)VCS_STATUS_TAG}
      # If tag name is at most 32 characters long, show it in full.
      # Otherwise show the first 12 … the last 12.
      # Tip: To always show tag name in full without truncation, delete the next line.
      (( $#tag > 32 )) && tag[13,-13]="…"  # <-- this line
      res+="${meta}#${clean}${tag//\%/%%}"
    fi

    # Display the current Git commit if there is no branch and no tag.
    # Tip: To always display the current Git commit, delete the next line.
    [[ -z $VCS_STATUS_LOCAL_BRANCH && -z $VCS_STATUS_TAG ]] &&  # <-- this line
      res+="${meta}@${clean}${VCS_STATUS_COMMIT[1,8]}"

    # Show tracking branch name if it differs from local branch.
    if [[ -n ${VCS_STATUS_REMOTE_BRANCH:#$VCS_STATUS_LOCAL_BRANCH} ]]; then
      res+="${meta}:${clean}${(V)VCS_STATUS_REMOTE_BRANCH//\%/%%}"
    fi

    # Display "wip" if the latest commit's summary contains "wip" or "WIP".
    if [[ $VCS_STATUS_COMMIT_SUMMARY == (|*[^[:alnum:]])(wip|WIP)(|[^[:alnum:]]*) ]]; then
      res+=" ${modified}wip"
    fi

    # ⇣42 if behind the remote.
    (( VCS_STATUS_COMMITS_BEHIND )) && res+=" ${clean}⇣${VCS_STATUS_COMMITS_BEHIND}"
    # ⇡42 if ahead of the remote; no leading space if also behind the remote: ⇣42⇡42.
    (( VCS_STATUS_COMMITS_AHEAD && !VCS_STATUS_COMMITS_BEHIND )) && res+=" "
    (( VCS_STATUS_COMMITS_AHEAD  )) && res+="${clean}⇡${VCS_STATUS_COMMITS_AHEAD}"
    # ⇠42 if behind the push remote.
    (( VCS_STATUS_PUSH_COMMITS_BEHIND )) && res+=" ${clean}⇠${VCS_STATUS_PUSH_COMMITS_BEHIND}"
    (( VCS_STATUS_PUSH_COMMITS_AHEAD && !VCS_STATUS_PUSH_COMMITS_BEHIND )) && res+=" "
    # ⇢42 if ahead of the push remote; no leading space if also behind: ⇠42⇢42.
    (( VCS_STATUS_PUSH_COMMITS_AHEAD  )) && res+="${clean}⇢${VCS_STATUS_PUSH_COMMITS_AHEAD}"
    # *42 if have stashes.
    (( VCS_STATUS_STASHES        )) && res+=" ${clean}*${VCS_STATUS_STASHES}"
    # 'merge' if the repo is in an unusual state.
    [[ -n $VCS_STATUS_ACTION     ]] && res+=" ${conflicted}${VCS_STATUS_ACTION}"
    # ~42 if have merge conflicts.
    (( VCS_STATUS_NUM_CONFLICTED )) && res+=" ${conflicted}~${VCS_STATUS_NUM_CONFLICTED}"
    # +42 if have staged changes.
    (( VCS_STATUS_NUM_STAGED     )) && res+=" ${modified}+${VCS_STATUS_NUM_STAGED}"
    # !42 if have unstaged changes.
    (( VCS_STATUS_NUM_UNSTAGED   )) && res+=" ${modified}!${VCS_STATUS_NUM_UNSTAGED}"
    # ?42 if have untracked files. It's really a question mark, your font isn't broken.
    # See POWERLEVEL9K_VCS_UNTRACKED_ICON above if you want to use a different icon.
    # Remove the next line if you don't want to see untracked files at all.
    (( VCS_STATUS_NUM_UNTRACKED  )) && res+=" ${untracked}${(g::)POWERLEVEL9K_VCS_UNTRACKED_ICON}${VCS_STATUS_NUM_UNTRACKED}"
    # "─" if the number of unstaged files is unknown. This can happen due to
    # POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY (see below) being set to a non-negative number lower
    # than the number of files in the Git index, or due to bash.showDirtyState being set to false
    # in the repository config. The number of staged and untracked files may also be unknown
    # in this case.
    (( VCS_STATUS_HAS_UNSTAGED == -1 )) && res+=" ${modified}─"

    typeset -g my_git_format=$res
  }
  functions -M my_git_formatter 2>/dev/null

  # Don't count the number of unstaged, untracked and conflicted files in Git repositories with
  # more than this many files in the index. Negative value means infinity.
  #
  # If you are working in Git repositories with tens of millions of files and seeing performance
  # sagging, try setting POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY to a number lower than the output
  # of `git ls-files | wc -l`. Alternatively, add `bash.showDirtyState = false` to the repository's
  # config: `git config bash.showDirtyState false`.
  typeset -g POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY=-1

  # Don't show Git status in prompt for repositories whose workdir matches this pattern.
  # For example, if set to '~', the Git repository at $HOME/.git will be ignored.
  # Multiple patterns can be combined with '|': '~(|/foo)|/bar/baz/*'.
  typeset -g POWERLEVEL9K_VCS_DISABLED_WORKDIR_PATTERN='~'

  # Disable the default Git status formatting.
  typeset -g POWERLEVEL9K_VCS_DISABLE_GITSTATUS_FORMATTING=true
  # Install our own Git status formatter.
  typeset -g POWERLEVEL9K_VCS_CONTENT_EXPANSION='${$((my_git_formatter(1)))+${my_git_format}}'
  typeset -g POWERLEVEL9K_VCS_LOADING_CONTENT_EXPANSION='${$((my_git_formatter(0)))+${my_git_format}}'
  # Enable counters for staged, unstaged, etc.
  typeset -g POWERLEVEL9K_VCS_{STAGED,UNSTAGED,UNTRACKED,CONFLICTED,COMMITS_AHEAD,COMMITS_BEHIND}_MAX_NUM=-1

  # Icon color.
  typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_COLOR=2
  typeset -g POWERLEVEL9K_VCS_LOADING_VISUAL_IDENTIFIER_COLOR=
  # Custom icon.
  # typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_EXPANSION='⭐'
  # Custom prefix.
  # typeset -g POWERLEVEL9K_VCS_PREFIX='%fon '

  # Show status of repositories of these types. You can add svn and/or hg if you are
  # using them. If you do, your prompt may become slow even when your current directory
  # isn't in an svn or hg reposotiry.
  typeset -g POWERLEVEL9K_VCS_BACKENDS=(git)

  # These settings are used for repositories other than Git or when gitstatusd fails and
  # Powerlevel10k has to fall back to using vcs_info.
  typeset -g POWERLEVEL9K_VCS_CLEAN_FOREGROUND=2
  typeset -g POWERLEVEL9K_VCS_UNTRACKED_FOREGROUND=2
  typeset -g POWERLEVEL9K_VCS_MODIFIED_FOREGROUND=3

  ##########################[ status: exit code of the last command ]###########################
  # Enable OK_PIPE, ERROR_PIPE and ERROR_SIGNAL status states to allow us to enable, disable and
  # style them independently from the regular OK and ERROR state.
  typeset -g POWERLEVEL9K_STATUS_EXTENDED_STATES=true

  # Status on success. No content, just an icon. No need to show it if prompt_char is enabled as
  # it will signify success by turning green.
  typeset -g POWERLEVEL9K_STATUS_OK=false
  typeset -g POWERLEVEL9K_STATUS_OK_FOREGROUND=2
  typeset -g POWERLEVEL9K_STATUS_OK_VISUAL_IDENTIFIER_EXPANSION='✔'

  # Status when some part of a pipe command fails but the overall exit status is zero. It may look
  # like this: 1|0.
  typeset -g POWERLEVEL9K_STATUS_OK_PIPE=true
  typeset -g POWERLEVEL9K_STATUS_OK_PIPE_FOREGROUND=2
  typeset -g POWERLEVEL9K_STATUS_OK_PIPE_VISUAL_IDENTIFIER_EXPANSION='✔'

  # Status when it's just an error code (e.g., '1'). No need to show it if prompt_char is enabled as
  # it will signify error by turning red.
  typeset -g POWERLEVEL9K_STATUS_ERROR=false
  typeset -g POWERLEVEL9K_STATUS_ERROR_FOREGROUND=1
  typeset -g POWERLEVEL9K_STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION='✘'

  # Status when the last command was terminated by a signal.
  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL=true
  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_FOREGROUND=1
  # Use terse signal names: "INT" instead of "SIGINT(2)".
  typeset -g POWERLEVEL9K_STATUS_VERBOSE_SIGNAME=false
  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION='✘'

  # Status when some part of a pipe command fails and the overall exit status is also non-zero.
  # It may look like this: 1|0.
  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE=true
  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_FOREGROUND=1
  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION='✘'

  ###################[ command_execution_time: duration of the last command ]###################
  # Show duration of the last command if takes at least this many seconds.
  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_THRESHOLD=3
  # Show this many fractional digits. Zero means round to seconds.
  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PRECISION=0
  # Execution time color.
  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FOREGROUND=3
  # Duration format: 1d 2h 3m 4s.
  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FORMAT='d h m s'
  # Custom icon.
  # typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_VISUAL_IDENTIFIER_EXPANSION='⭐'
  # Custom prefix.
  # typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PREFIX='%ftook '

  #######################[ background_jobs: presence of background jobs ]#######################
  # Don't show the number of background jobs.
  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VERBOSE=false
  # Background jobs color.
  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_FOREGROUND=1
  # Custom icon.
  # typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VISUAL_IDENTIFIER_EXPANSION='⭐'

  #######################[ direnv: direnv status (https://direnv.net/) ]########################
  # Direnv color.
  typeset -g POWERLEVEL9K_DIRENV_FOREGROUND=3
  # Custom icon.
  # typeset -g POWERLEVEL9K_DIRENV_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ###############[ asdf: asdf version manager (https://github.com/asdf-vm/asdf) ]###############
  # Default asdf color. Only used to display tools for which there is no color override (see below).
  # Tip:  Override this parameter for ${TOOL} with POWERLEVEL9K_ASDF_${TOOL}_FOREGROUND.
  typeset -g POWERLEVEL9K_ASDF_FOREGROUND=6

  # There are four parameters that can be used to hide asdf tools. Each parameter describes
  # conditions under which a tool gets hidden. Parameters can hide tools but not unhide them. If at
  # least one parameter decides to hide a tool, that tool gets hidden. If no parameter decides to
  # hide a tool, it gets shown.
  #
  # Special note on the difference between POWERLEVEL9K_ASDF_SOURCES and
  # POWERLEVEL9K_ASDF_PROMPT_ALWAYS_SHOW. Consider the effect of the following commands:
  #
  #   asdf local  python 3.8.1
  #   asdf global python 3.8.1
  #
  # After running both commands the current python version is 3.8.1 and its source is "local" as
  # it takes precedence over "global". If POWERLEVEL9K_ASDF_PROMPT_ALWAYS_SHOW is set to false,
  # it'll hide python version in this case because 3.8.1 is the same as the global version.
  # POWERLEVEL9K_ASDF_SOURCES will hide python version only if the value of this parameter doesn't
  # contain "local".

  # Hide tool versions that don't come from one of these sources.
  #
  # Available sources:
  #
  # - shell   `asdf current` says "set by ASDF_${TOOL}_VERSION environment variable"
  # - local   `asdf current` says "set by /some/not/home/directory/file"
  # - global  `asdf current` says "set by /home/username/file"
  #
  # Note: If this parameter is set to (shell local global), it won't hide tools.
  # Tip:  Override this parameter for ${TOOL} with POWERLEVEL9K_ASDF_${TOOL}_SOURCES.
  typeset -g POWERLEVEL9K_ASDF_SOURCES=(shell local global)

  # If set to false, hide tool versions that are the same as global.
  #
  # Note: The name of this parameter doesn't reflect its meaning at all.
  # Note: If this parameter is set to true, it won't hide tools.
  # Tip:  Override this parameter for ${TOOL} with POWERLEVEL9K_ASDF_${TOOL}_PROMPT_ALWAYS_SHOW.
  typeset -g POWERLEVEL9K_ASDF_PROMPT_ALWAYS_SHOW=false

  # If set to false, hide tool versions that are equal to "system".
  #
  # Note: If this parameter is set to true, it won't hide tools.
  # Tip: Override this parameter for ${TOOL} with POWERLEVEL9K_ASDF_${TOOL}_SHOW_SYSTEM.
  typeset -g POWERLEVEL9K_ASDF_SHOW_SYSTEM=true

  # If set to non-empty value, hide tools unless there is a file matching the specified file pattern
  # in the current directory, or its parent directory, or its grandparent directory, and so on.
  #
  # Note: If this parameter is set to empty value, it won't hide tools.
  # Note: SHOW_ON_UPGLOB isn't specific to asdf. It works with all prompt segments.
  # Tip: Override this parameter for ${TOOL} with POWERLEVEL9K_ASDF_${TOOL}_SHOW_ON_UPGLOB.
  #
  # Example: Hide nodejs version when there is no package.json and no *.js files in the current
  # directory, in `..`, in `../..` and so on.
  #
  #   typeset -g POWERLEVEL9K_ASDF_NODEJS_SHOW_ON_UPGLOB='*.js|package.json'
  typeset -g POWERLEVEL9K_ASDF_SHOW_ON_UPGLOB=

  ###########[ timewarrior: timewarrior tracking status (https://timewarrior.net/) ]############
  # Timewarrior color.
  typeset -g POWERLEVEL9K_TIMEWARRIOR_FOREGROUND=4
  # If the tracked task is longer than 24 characters, truncate and append "…".
  # Tip: To always display tasks without truncation, delete the following parameter.
  # Tip: To hide task names and display just the icon when time tracking is enabled, set the
  # value of the following parameter to "".
  typeset -g POWERLEVEL9K_TIMEWARRIOR_CONTENT_EXPANSION='${P9K_CONTENT:0:24}${${P9K_CONTENT:24}:+…}'

  # Custom icon.
  # typeset -g POWERLEVEL9K_TIMEWARRIOR_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ##############[ taskwarrior: taskwarrior task count (https://taskwarrior.org/) ]##############
  # Taskwarrior color.
  typeset -g POWERLEVEL9K_TASKWARRIOR_FOREGROUND=6

  # Taskwarrior segment format. The following parameters are available within the expansion.
  #
  # - P9K_TASKWARRIOR_PENDING_COUNT   The number of pending tasks: `task +PENDING count`.
  # - P9K_TASKWARRIOR_OVERDUE_COUNT   The number of overdue tasks: `task +OVERDUE count`.
  #
  # Zero values are represented as empty parameters.
  #
  # The default format:
  #
  #   '${P9K_TASKWARRIOR_OVERDUE_COUNT:+"!$P9K_TASKWARRIOR_OVERDUE_COUNT/"}$P9K_TASKWARRIOR_PENDING_COUNT'
  #
  # typeset -g POWERLEVEL9K_TASKWARRIOR_CONTENT_EXPANSION='$P9K_TASKWARRIOR_PENDING_COUNT'

  # Custom icon.
  # typeset -g POWERLEVEL9K_TASKWARRIOR_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ##################################[ context: user@hostname ]##################################
  # Context color when running with privileges.
  typeset -g POWERLEVEL9K_CONTEXT_ROOT_FOREGROUND=1
  # Context color in SSH without privileges.
  typeset -g POWERLEVEL9K_CONTEXT_{REMOTE,REMOTE_SUDO}_FOREGROUND=7
  # Default context color (no privileges, no SSH).
  typeset -g POWERLEVEL9K_CONTEXT_FOREGROUND=7

  # Context format when running with privileges: bold user@hostname.
  typeset -g POWERLEVEL9K_CONTEXT_ROOT_TEMPLATE='%B%n@%m'
  # Context format when in SSH without privileges: user@hostname.
  typeset -g POWERLEVEL9K_CONTEXT_{REMOTE,REMOTE_SUDO}_TEMPLATE='%n@%m'
  # Default context format (no privileges, no SSH): user@hostname.
  typeset -g POWERLEVEL9K_CONTEXT_TEMPLATE='%n@%m'

  # Don't show context unless running with privileges or in SSH.
  # Tip: Remove the next line to always show context.
  typeset -g POWERLEVEL9K_CONTEXT_{DEFAULT,SUDO}_{CONTENT,VISUAL_IDENTIFIER}_EXPANSION=

  # Custom icon.
  # typeset -g POWERLEVEL9K_CONTEXT_VISUAL_IDENTIFIER_EXPANSION='⭐'
  # Custom prefix.
  # typeset -g POWERLEVEL9K_CONTEXT_PREFIX='%fwith '

  ###[ virtualenv: python virtual environment (https://docs.python.org/3/library/venv.html) ]###
  # Python virtual environment color.
  typeset -g POWERLEVEL9K_VIRTUALENV_FOREGROUND=6
  # Don't show Python version next to the virtual environment name.
  typeset -g POWERLEVEL9K_VIRTUALENV_SHOW_PYTHON_VERSION=false
  # If set to "false", won't show virtualenv if pyenv is already shown.
  # If set to "if-different", won't show virtualenv if it's the same as pyenv.
  typeset -g POWERLEVEL9K_VIRTUALENV_SHOW_WITH_PYENV=false
  # Separate environment name from Python version only with a space.
  typeset -g POWERLEVEL9K_VIRTUALENV_{LEFT,RIGHT}_DELIMITER=
  # Custom icon.
  # typeset -g POWERLEVEL9K_VIRTUALENV_VISUAL_IDENTIFIER_EXPANSION='⭐'

  #####################[ anaconda: conda environment (https://conda.io/) ]######################
  # Anaconda environment color.
  typeset -g POWERLEVEL9K_ANACONDA_FOREGROUND=6

  # Anaconda segment format. The following parameters are available within the expansion.
  #
  # - CONDA_PREFIX                 Absolute path to the active Anaconda/Miniconda environment.
  # - CONDA_DEFAULT_ENV            Name of the active Anaconda/Miniconda environment.
  # - CONDA_PROMPT_MODIFIER        Configurable prompt modifier (see below).
  # - P9K_ANACONDA_PYTHON_VERSION  Current python version (python --version).
  #
  # CONDA_PROMPT_MODIFIER can be configured with the following command:
  #
  #   conda config --set env_prompt '({default_env}) '
  #
  # The last argument is a Python format string that can use the following variables:
  #
  # - prefix       The same as CONDA_PREFIX.
  # - default_env  The same as CONDA_DEFAULT_ENV.
  # - name         The last segment of CONDA_PREFIX.
  # - stacked_env  Comma-separated list of names in the environment stack. The first element is
  #                always the same as default_env.
  #
  # Note: '({default_env}) ' is the default value of env_prompt.
  #
  # The default value of POWERLEVEL9K_ANACONDA_CONTENT_EXPANSION expands to $CONDA_PROMPT_MODIFIER
  # without the surrounding parentheses, or to the last path component of CONDA_PREFIX if the former
  # is empty.
  typeset -g POWERLEVEL9K_ANACONDA_CONTENT_EXPANSION='${${${${CONDA_PROMPT_MODIFIER#\(}% }%\)}:-${CONDA_PREFIX:t}}'

  # Custom icon.
  # typeset -g POWERLEVEL9K_ANACONDA_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ################[ pyenv: python environment (https://github.com/pyenv/pyenv) ]################
  # Pyenv color.
  typeset -g POWERLEVEL9K_PYENV_FOREGROUND=6
  # Hide python version if it doesn't come from one of these sources.
  typeset -g POWERLEVEL9K_PYENV_SOURCES=(shell local global)
  # If set to false, hide python version if it's the same as global:
  # $(pyenv version-name) == $(pyenv global).
  typeset -g POWERLEVEL9K_PYENV_PROMPT_ALWAYS_SHOW=false
  # If set to false, hide python version if it's equal to "system".
  typeset -g POWERLEVEL9K_PYENV_SHOW_SYSTEM=true

  # Pyenv segment format. The following parameters are available within the expansion.
  #
  # - P9K_CONTENT                Current pyenv environment (pyenv version-name).
  # - P9K_PYENV_PYTHON_VERSION   Current python version (python --version).
  #
  # The default format has the following logic:
  #
  # 1. Display just "$P9K_CONTENT" if it's equal to "$P9K_PYENV_PYTHON_VERSION" or
  #    starts with "$P9K_PYENV_PYTHON_VERSION/".
  # 2. Otherwise display "$P9K_CONTENT $P9K_PYENV_PYTHON_VERSION".
  typeset -g POWERLEVEL9K_PYENV_CONTENT_EXPANSION='${P9K_CONTENT}${${P9K_CONTENT:#$P9K_PYENV_PYTHON_VERSION(|/*)}:+ $P9K_PYENV_PYTHON_VERSION}'

  # Custom icon.
  # typeset -g POWERLEVEL9K_PYENV_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ################[ goenv: go environment (https://github.com/syndbg/goenv) ]################
  # Goenv color.
  typeset -g POWERLEVEL9K_GOENV_FOREGROUND=6
  # Hide go version if it doesn't come from one of these sources.
  typeset -g POWERLEVEL9K_GOENV_SOURCES=(shell local global)
  # If set to false, hide go version if it's the same as global:
  # $(goenv version-name) == $(goenv global).
  typeset -g POWERLEVEL9K_GOENV_PROMPT_ALWAYS_SHOW=false
  # If set to false, hide go version if it's equal to "system".
  typeset -g POWERLEVEL9K_GOENV_SHOW_SYSTEM=true
  # Custom icon.
  # typeset -g POWERLEVEL9K_GOENV_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ##########[ nodenv: node.js version from nodenv (https://github.com/nodenv/nodenv) ]##########
  # Nodenv color.
  typeset -g POWERLEVEL9K_NODENV_FOREGROUND=2
  # Hide node version if it doesn't come from one of these sources.
  typeset -g POWERLEVEL9K_NODENV_SOURCES=(shell local global)
  # If set to false, hide node version if it's the same as global:
  # $(nodenv version-name) == $(nodenv global).
  typeset -g POWERLEVEL9K_NODENV_PROMPT_ALWAYS_SHOW=false
  # If set to false, hide node version if it's equal to "system".
  typeset -g POWERLEVEL9K_NODENV_SHOW_SYSTEM=true
  # Custom icon.
  # typeset -g POWERLEVEL9K_NODENV_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ##############[ nvm: node.js version from nvm (https://github.com/nvm-sh/nvm) ]###############
  # Nvm color.
  typeset -g POWERLEVEL9K_NVM_FOREGROUND=2
  # Custom icon.
  # typeset -g POWERLEVEL9K_NVM_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ############[ nodeenv: node.js environment (https://github.com/ekalinin/nodeenv) ]############
  # Nodeenv color.
  typeset -g POWERLEVEL9K_NODEENV_FOREGROUND=2
  # Don't show Node version next to the environment name.
  typeset -g POWERLEVEL9K_NODEENV_SHOW_NODE_VERSION=false
  # Separate environment name from Node version only with a space.
  typeset -g POWERLEVEL9K_NODEENV_{LEFT,RIGHT}_DELIMITER=
  # Custom icon.
  # typeset -g POWERLEVEL9K_NODEENV_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ##############################[ node_version: node.js version ]###############################
  # Node version color.
  typeset -g POWERLEVEL9K_NODE_VERSION_FOREGROUND=2
  # Show node version only when in a directory tree containing package.json.
  typeset -g POWERLEVEL9K_NODE_VERSION_PROJECT_ONLY=true
  # Custom icon.
  # typeset -g POWERLEVEL9K_NODE_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'

  #######################[ go_version: go version (https://golang.org) ]########################
  # Go version color.
  typeset -g POWERLEVEL9K_GO_VERSION_FOREGROUND=6
  # Show go version only when in a go project subdirectory.
  typeset -g POWERLEVEL9K_GO_VERSION_PROJECT_ONLY=true
  # Custom icon.
  # typeset -g POWERLEVEL9K_GO_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'

  #################[ rust_version: rustc version (https://www.rust-lang.org) ]##################
  # Rust version color.
  typeset -g POWERLEVEL9K_RUST_VERSION_FOREGROUND=4
  # Show rust version only when in a rust project subdirectory.
  typeset -g POWERLEVEL9K_RUST_VERSION_PROJECT_ONLY=true
  # Custom icon.
  # typeset -g POWERLEVEL9K_RUST_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ###############[ dotnet_version: .NET version (https://dotnet.microsoft.com) ]################
  # .NET version color.
  typeset -g POWERLEVEL9K_DOTNET_VERSION_FOREGROUND=5
  # Show .NET version only when in a .NET project subdirectory.
  typeset -g POWERLEVEL9K_DOTNET_VERSION_PROJECT_ONLY=true
  # Custom icon.
  # typeset -g POWERLEVEL9K_DOTNET_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'

  #####################[ php_version: php version (https://www.php.net/) ]######################
  # PHP version color.
  typeset -g POWERLEVEL9K_PHP_VERSION_FOREGROUND=5
  # Show PHP version only when in a PHP project subdirectory.
  typeset -g POWERLEVEL9K_PHP_VERSION_PROJECT_ONLY=true
  # Custom icon.
  # typeset -g POWERLEVEL9K_PHP_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ##########[ laravel_version: laravel php framework version (https://laravel.com/) ]###########
  # Laravel version color.
  typeset -g POWERLEVEL9K_LARAVEL_VERSION_FOREGROUND=1
  # Custom icon.
  # typeset -g POWERLEVEL9K_LARAVEL_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ####################[ java_version: java version (https://www.java.com/) ]####################
  # Java version color.
  typeset -g POWERLEVEL9K_JAVA_VERSION_FOREGROUND=4
  # Show java version only when in a java project subdirectory.
  typeset -g POWERLEVEL9K_JAVA_VERSION_PROJECT_ONLY=true
  # Show brief version.
  typeset -g POWERLEVEL9K_JAVA_VERSION_FULL=false
  # Custom icon.
  # typeset -g POWERLEVEL9K_JAVA_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ###[ package: name@version from package.json (https://docs.npmjs.com/files/package.json) ]####
  # Package color.
  typeset -g POWERLEVEL9K_PACKAGE_FOREGROUND=6
  # Package format. The following parameters are available within the expansion.
  #
  # - P9K_PACKAGE_NAME     The value of `name` field in package.json.
  # - P9K_PACKAGE_VERSION  The value of `version` field in package.json.
  #
  # typeset -g POWERLEVEL9K_PACKAGE_CONTENT_EXPANSION='${P9K_PACKAGE_NAME//\%/%%}@${P9K_PACKAGE_VERSION//\%/%%}'
  # Custom icon.
  # typeset -g POWERLEVEL9K_PACKAGE_VISUAL_IDENTIFIER_EXPANSION='⭐'

  #############[ rbenv: ruby version from rbenv (https://github.com/rbenv/rbenv) ]##############
  # Rbenv color.
  typeset -g POWERLEVEL9K_RBENV_FOREGROUND=1
  # Hide ruby version if it doesn't come from one of these sources.
  typeset -g POWERLEVEL9K_RBENV_SOURCES=(shell local global)
  # If set to false, hide ruby version if it's the same as global:
  # $(rbenv version-name) == $(rbenv global).
  typeset -g POWERLEVEL9K_RBENV_PROMPT_ALWAYS_SHOW=false
  # If set to false, hide ruby version if it's equal to "system".
  typeset -g POWERLEVEL9K_RBENV_SHOW_SYSTEM=true
  # Custom icon.
  # typeset -g POWERLEVEL9K_RBENV_VISUAL_IDENTIFIER_EXPANSION='⭐'

  #######################[ rvm: ruby version from rvm (https://rvm.io) ]########################
  # Rvm color.
  typeset -g POWERLEVEL9K_RVM_FOREGROUND=1
  # Don't show @gemset at the end.
  typeset -g POWERLEVEL9K_RVM_SHOW_GEMSET=false
  # Don't show ruby- at the front.
  typeset -g POWERLEVEL9K_RVM_SHOW_PREFIX=false
  # Custom icon.
  # typeset -g POWERLEVEL9K_RVM_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ###########[ fvm: flutter version management (https://github.com/leoafarias/fvm) ]############
  # Fvm color.
  typeset -g POWERLEVEL9K_FVM_FOREGROUND=4
  # Custom icon.
  # typeset -g POWERLEVEL9K_FVM_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ##########[ luaenv: lua version from luaenv (https://github.com/cehoffman/luaenv) ]###########
  # Lua color.
  typeset -g POWERLEVEL9K_LUAENV_FOREGROUND=4
  # Hide lua version if it doesn't come from one of these sources.
  typeset -g POWERLEVEL9K_LUAENV_SOURCES=(shell local global)
  # If set to false, hide lua version if it's the same as global:
  # $(luaenv version-name) == $(luaenv global).
  typeset -g POWERLEVEL9K_LUAENV_PROMPT_ALWAYS_SHOW=false
  # If set to false, hide lua version if it's equal to "system".
  typeset -g POWERLEVEL9K_LUAENV_SHOW_SYSTEM=true
  # Custom icon.
  # typeset -g POWERLEVEL9K_LUAENV_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ###############[ jenv: java version from jenv (https://github.com/jenv/jenv) ]################
  # Java color.
  typeset -g POWERLEVEL9K_JENV_FOREGROUND=4
  # Hide java version if it doesn't come from one of these sources.
  typeset -g POWERLEVEL9K_JENV_SOURCES=(shell local global)
  # If set to false, hide java version if it's the same as global:
  # $(jenv version-name) == $(jenv global).
  typeset -g POWERLEVEL9K_JENV_PROMPT_ALWAYS_SHOW=false
  # If set to false, hide java version if it's equal to "system".
  typeset -g POWERLEVEL9K_JENV_SHOW_SYSTEM=true
  # Custom icon.
  # typeset -g POWERLEVEL9K_JENV_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ###########[ plenv: perl version from plenv (https://github.com/tokuhirom/plenv) ]############
  # Perl color.
  typeset -g POWERLEVEL9K_PLENV_FOREGROUND=6
  # Hide perl version if it doesn't come from one of these sources.
  typeset -g POWERLEVEL9K_PLENV_SOURCES=(shell local global)
  # If set to false, hide perl version if it's the same as global:
  # $(plenv version-name) == $(plenv global).
  typeset -g POWERLEVEL9K_PLENV_PROMPT_ALWAYS_SHOW=false
  # If set to false, hide perl version if it's equal to "system".
  typeset -g POWERLEVEL9K_PLENV_SHOW_SYSTEM=true
  # Custom icon.
  # typeset -g POWERLEVEL9K_PLENV_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ###########[ perlbrew: perl version from perlbrew (https://github.com/gugod/App-perlbrew) ]############
  # Perlbrew color.
  typeset -g POWERLEVEL9K_PERLBREW_FOREGROUND=67
  # Show perlbrew version only when in a perl project subdirectory.
  typeset -g POWERLEVEL9K_PERLBREW_PROJECT_ONLY=true
  # Don't show "perl-" at the front.
  typeset -g POWERLEVEL9K_PERLBREW_SHOW_PREFIX=false
  # Custom icon.
  # typeset -g POWERLEVEL9K_PERLBREW_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ############[ phpenv: php version from phpenv (https://github.com/phpenv/phpenv) ]############
  # PHP color.
  typeset -g POWERLEVEL9K_PHPENV_FOREGROUND=5
  # Hide php version if it doesn't come from one of these sources.
  typeset -g POWERLEVEL9K_PHPENV_SOURCES=(shell local global)
  # If set to false, hide php version if it's the same as global:
  # $(phpenv version-name) == $(phpenv global).
  typeset -g POWERLEVEL9K_PHPENV_PROMPT_ALWAYS_SHOW=false
  # If set to false, hide php version if it's equal to "system".
  typeset -g POWERLEVEL9K_PHPENV_SHOW_SYSTEM=true
  # Custom icon.
  # typeset -g POWERLEVEL9K_PHPENV_VISUAL_IDENTIFIER_EXPANSION='⭐'

  #######[ scalaenv: scala version from scalaenv (https://github.com/scalaenv/scalaenv) ]#######
  # Scala color.
  typeset -g POWERLEVEL9K_SCALAENV_FOREGROUND=1
  # Hide scala version if it doesn't come from one of these sources.
  typeset -g POWERLEVEL9K_SCALAENV_SOURCES=(shell local global)
  # If set to false, hide scala version if it's the same as global:
  # $(scalaenv version-name) == $(scalaenv global).
  typeset -g POWERLEVEL9K_SCALAENV_PROMPT_ALWAYS_SHOW=false
  # If set to false, hide scala version if it's equal to "system".
  typeset -g POWERLEVEL9K_SCALAENV_SHOW_SYSTEM=true
  # Custom icon.
  # typeset -g POWERLEVEL9K_SCALAENV_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ##########[ haskell_stack: haskell version from stack (https://haskellstack.org/) ]###########
  # Haskell color.
  typeset -g POWERLEVEL9K_HASKELL_STACK_FOREGROUND=3
  # Hide haskell version if it doesn't come from one of these sources.
  #
  #   shell:  version is set by STACK_YAML
  #   local:  version is set by stack.yaml up the directory tree
  #   global: version is set by the implicit global project (~/.stack/global-project/stack.yaml)
  typeset -g POWERLEVEL9K_HASKELL_STACK_SOURCES=(shell local)
  # If set to false, hide haskell version if it's the same as in the implicit global project.
  typeset -g POWERLEVEL9K_HASKELL_STACK_ALWAYS_SHOW=true
  # Custom icon.
  # typeset -g POWERLEVEL9K_HASKELL_STACK_VISUAL_IDENTIFIER_EXPANSION='⭐'

  ####################################[ time: current time ]####################################
  # Current time color.
  typeset -g POWERLEVEL9K_TIME_FOREGROUND=6
  # Format for the current time: 09:51:02. See `man 3 strftime`.
  typeset -g POWERLEVEL9K_TIME_FORMAT='%D{%H:%M:%S}'
  # If set to true, time will update when you hit enter. This way prompts for the past
  # commands will contain the start times of their commands as opposed to the default
  # behavior where they contain the end times of their preceding commands.
  typeset -g POWERLEVEL9K_TIME_UPDATE_ON_COMMAND=false
  # Custom icon.
  # typeset -g POWERLEVEL9K_TIME_VISUAL_IDENTIFIER_EXPANSION='⭐'
  # Custom prefix.
  # typeset -g POWERLEVEL9K_TIME_PREFIX='%fat '

  # Example of a user-defined prompt segment. Function prompt_example will be called on every
  # prompt if `example` prompt segment is added to POWERLEVEL9K_LEFT_PROMPT_ELEMENTS or
  # POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS. It displays an icon and green text greeting the user.
  #
  # Type `p10k help segment` for documentation and a more sophisticated example.
  function prompt_example() {
    p10k segment -f 2 -i '⭐' -t 'hello, %n'
  }

  # User-defined prompt segments may optionally provide an instant_prompt_* function. Its job
  # is to generate the prompt segment for display in instant prompt. See
  # https://github.com/romkatv/powerlevel10k/blob/master/README.md#instant-prompt.
  #
  # Powerlevel10k will call instant_prompt_* at the same time as the regular prompt_* function
  # and will record all `p10k segment` calls it makes. When displaying instant prompt, Powerlevel10k
  # will replay these calls without actually calling instant_prompt_*. It is imperative that
  # instant_prompt_* always makes the same `p10k segment` calls regardless of environment. If this
  # rule is not observed, the content of instant prompt will be incorrect.
  #
  # Usually, you should either not define instant_prompt_* or simply call prompt_* from it. If
  # instant_prompt_* is not defined for a segment, the segment won't be shown in instant prompt.
  function instant_prompt_example() {
    # Since prompt_example always makes the same `p10k segment` calls, we can call it from
    # instant_prompt_example. This will give us the same `example` prompt segment in the instant
    # and regular prompts.
    prompt_example
  }

  # User-defined prompt segments can be customized the same way as built-in segments.
  # typeset -g POWERLEVEL9K_EXAMPLE_FOREGROUND=208
  # typeset -g POWERLEVEL9K_EXAMPLE_VISUAL_IDENTIFIER_EXPANSION='⭐'

  # Transient prompt works similarly to the builtin transient_rprompt option. It trims down prompt
  # when accepting a command line. Supported values:
  #
  #   - off:      Don't change prompt when accepting a command line.
  #   - always:   Trim down prompt when accepting a command line.
  #   - same-dir: Trim down prompt when accepting a command line unless this is the first command
  #               typed after changing current working directory.
  typeset -g POWERLEVEL9K_TRANSIENT_PROMPT=always

  # Instant prompt mode.
  #
  #   - off:     Disable instant prompt. Choose this if you've tried instant prompt and found
  #              it incompatible with your zsh configuration files.
  #   - quiet:   Enable instant prompt and don't print warnings when detecting console output
  #              during zsh initialization. Choose this if you've read and understood
  #              https://github.com/romkatv/powerlevel10k/blob/master/README.md#instant-prompt.
  #   - verbose: Enable instant prompt and print a warning when detecting console output during
  #              zsh initialization. Choose this if you've never tried instant prompt, haven't
  #              seen the warning, or if you are unsure what this all means.
  typeset -g POWERLEVEL9K_INSTANT_PROMPT=verbose

  # Hot reload allows you to change POWERLEVEL9K options after Powerlevel10k has been initialized.
  # For example, you can type POWERLEVEL9K_BACKGROUND=red and see your prompt turn red. Hot reload
  # can slow down prompt by 1-2 milliseconds, so it's better to keep it turned off unless you
  # really need it.
  typeset -g POWERLEVEL9K_DISABLE_HOT_RELOAD=true

  # If p10k is already loaded, reload configuration.
  # This works even with POWERLEVEL9K_DISABLE_HOT_RELOAD=true.
  (( ! $+functions[p10k] )) || p10k reload
}

# Tell `p10k configure` which file it should overwrite.
typeset -g POWERLEVEL9K_CONFIG_FILE=${${(%):-%x}:a}

(( ${#p10k_config_opts} )) && setopt ${p10k_config_opts[@]}
'builtin' 'unset' 'p10k_config_opts'

[romkatv]

Try running p10k configure and selecting rainbow style.

[crazy-canux]

That's the problem. I select rainbow but no color.

[romkatv]

The config you've posted isn't rainbow though. Have you tried running p10k configure and selecting rainbow? Can you post a video doing that?

[crazy-canux]

Yes, It's rainbow.

[crazy-canux]

I copy the p10k.zsh file from my macos to this ubuntu server it's work as expected. But generate new one on ubuntu not working.

[romkatv]

If you post a video, I might be able to tell you why generating on ubuntu doesn't work.

[romkatv]

Closing due to inactivity.