Closed mzuniga51 closed 2 years ago
tagyoureit
commented
2 years ago Can you try to change the end time of the spa 12am-12am schedule? Maybe it has to due with the same start/end time? Do you have it set as 12-12 or is it actually set as "don't stop" in the schedule definition?
mzuniga51
commented
2 years ago So, apparently if you create a 24h schedule in OCP or app it will not appear in dashPanel. That is true even if later you modify that same schedule to other than 24 h. Im not using the “dont stop” option. Conversely, I found that i can create a schedule for less than 24h and later change it to 24 h and then it will appear in dashPanel no problem. Go figure!
On an unrelated issue, could you consider adding a tab in the home menu to be able to configure the spa side remote (is4)?
Many thanks as always.
On Sun, Dec 26, 2021 at 3:43 AM tagyoureit @.***> wrote:
Can you try to change the end time of the spa 12am-12am schedule? Maybe it has to due with the same start/end time? Do you have it set as 12-12 or is it actually set as "don't stop" in the schedule definition?
— Reply to this email directly, view it on GitHub https://github.com/rstrouse/nodejs-poolController-dashPanel/issues/47#issuecomment-1001139172, or unsubscribe https://github.com/notifications/unsubscribe-auth/AV2HSSY2JXTOZ3GVNOPXYQLUS3PTDANCNFSM5KYFXDRQ . You are receiving this because you authored the thread.Message ID: @.***>
rstrouse
commented
2 years ago This actually had to do with changes that were not picked up from IntelliCenter where the schedule was not being set as active when the start or end times were midnight. This has been fixed if you pull njsPC and dashPanel. After you pull the repos please hard refresh your dashPanel display then go to the hamburger menu and click on the system tab. Then press the Reload Config button to pull all the schedules from the OCP.
I would love to add a spa side remote tab. Unfortunately, I do not have one but if you are willing to go through some testing I can get one added.
mzuniga51
commented
2 years ago Thank you. At the moment i only have one of the buttons in the remote working and the rest seem to have been given up so I’m actually thinking about replacing it. I dont know if I can still help you.
By the way, I have Intellibrite lights and would like to use the “hold” and “recall” functions from dashPanel. Is that currently available?
Thanks and have a great new year!
On Sun, Dec 26, 2021 at 2:17 PM rstrouse @.***> wrote:
This actually had to do with changes that were not picked up from IntelliCenter where the schedule was not being set as active when the start or end times were midnight. This has been fixed if you pull njsPC and dashPanel. After you pull the repos please hard refresh your dashPanel display then go to the hamburger menu and click on the system tab. Then press the Reload Config button to pull all the schedules from the OCP.
I would love to add a spa side remote tab. Unfortunately, I do not have one but if you are willing to go through some testing I can get one added.
— Reply to this email directly, view it on GitHub https://github.com/rstrouse/nodejs-poolController-dashPanel/issues/47#issuecomment-1001237572, or unsubscribe https://github.com/notifications/unsubscribe-auth/AV2HSSYROXDOJDOOEJMQKELUS5Z6XANCNFSM5KYFXDRQ . You are receiving this because you authored the thread.Message ID: @.***>
rstrouse
commented
2 years ago I checked in some additional functions for the Hold/Recall in IntelliBrite.
mzuniga51
commented
2 years ago Great. I try it later today
On Fri, Jan 7, 2022 at 4:27 PM rstrouse @.***> wrote:
I checked in some additional functions for the Hold/Recall in IntelliBrite.
— Reply to this email directly, view it on GitHub https://github.com/rstrouse/nodejs-poolController-dashPanel/issues/47#issuecomment-1007788558, or unsubscribe https://github.com/notifications/unsubscribe-auth/AV2HSS3AJJCX4SZMEETRSDTUU5SEFANCNFSM5KYFXDRQ . You are receiving this because you authored the thread.Message ID: @.***>
mzuniga51
commented
2 years ago So i can see the recall and hold button in my mac browser but not in my ipad or iphone browser. Funny.
Btw, I have now influx and grafana working and i see a lot of data from the Intellicenter. However I cant see certain data from my Intellichem (say every time the Intellichem tells my CO2 tank to dose). Do you think there is a way to extract that information? Intellicenter must have that data from the Intellichem i reckon... Would you like to work with me on this?
Thanks!
On Fri, Jan 7, 2022 at 4:27 PM rstrouse @.***> wrote:
I checked in some additional functions for the Hold/Recall in IntelliBrite.
— Reply to this email directly, view it on GitHub https://github.com/rstrouse/nodejs-poolController-dashPanel/issues/47#issuecomment-1007788558, or unsubscribe https://github.com/notifications/unsubscribe-auth/AV2HSS3AJJCX4SZMEETRSDTUU5SEFANCNFSM5KYFXDRQ . You are receiving this because you authored the thread.Message ID: @.***>
rstrouse
commented
2 years ago You need to hard refresh the browsers on your ipad and iphone. Unfortunately, Apple is braindead about that and don't allow you to clear the cache without going through settings. You can try to wait for Apple to refresh sometimes it takes a day or so.
As for the CO2 tank dose we scrape every bit of information that IntelliChem puts out so I would assume that it tells when the dose occurs. Unfortunately, I do know that you won't get any data about how much was dosed.
Here are some of my grafana graphs related to REM Chem.
mzuniga51
commented
2 years ago Thank you Robert. Would it be possible for you to share some of your grafana templates with me? No swear if you prefer not to. Thanks!
On Fri, Jan 7, 2022 at 6:27 PM rstrouse @.***> wrote:
You need to hard refresh the browsers on your ipad and iphone. Unfortunately, Apple is braindead about that and don't allow you to clear the cache without going through settings. You can try to wait for Apple to refresh sometimes it takes a day or so.
As for the CO2 tank dose we scrape every bit of information that IntelliChem puts out so I would assume that it tells when the dose occurs. Unfortunately, I do know that you won't get any data about how much was dosed.
Here are some of my grafana graphs related to REM Chem.
[image: image] https://user-images.githubusercontent.com/47839015/148623500-5b28e759-fa6c-4492-a96c-93d9246e79b3.png
— Reply to this email directly, view it on GitHub https://github.com/rstrouse/nodejs-poolController-dashPanel/issues/47#issuecomment-1007839428, or unsubscribe https://github.com/notifications/unsubscribe-auth/AV2HSS4BI3Y6KGWOC7SMAWDUU6AGNANCNFSM5KYFXDRQ . You are receiving this because you authored the thread.Message ID: @.***>
rstrouse
commented
2 years ago Here you go. Pool General-1641605165918.json.txt
mzuniga51
commented
2 years ago Robert youre the best. Thanks a bunch. On Fri, Jan 7, 2022 at 7:27 PM rstrouse @.***> wrote:
Here you go. Pool General-1641605165918.json.txt https://github.com/rstrouse/nodejs-poolController-dashPanel/files/7832139/Pool.General-1641605165918.json.txt
— Reply to this email directly, view it on GitHub https://github.com/rstrouse/nodejs-poolController-dashPanel/issues/47#issuecomment-1007857268, or unsubscribe https://github.com/notifications/unsubscribe-auth/AV2HSSYNQPMDGFGOGF3YXWTUU6HI7ANCNFSM5KYFXDRQ . You are receiving this because you authored the thread.Message ID: @.***>
Hi Robert. Im now running the controller from my mac mini server and using the Elfin wireless adapter for comms. Much more stable now.
However I’ve run into an issue where not all schedules created at the OPC or the app appear in the dashPanel. No idea what might be causing that. See images attached.