My ArchLinux-Setting

My preferred setting for Arch Linux (Qtile)

Disable touchpad on the fly

synclient MaxTapTime=0
synclient MaxTapMove=0 

Permanently disable touchpad

edit in /etc/X11/xorg.conf.d/50-synaptics.conf

Option "MaxTapTime" "0"
Option "MaxTapMove" "0"

Disable TouchScreen on the fly

xinput -l
xinput disable 10

If using Qtile as your desktop environment:

My configuration can be found here

Troubleshooting (Get started)

1. USB stick with arch linux live
2. Mount your computer in the arch in the usb

   mount /dev/sdax /mnt

   3.1 Sent the state of the interface up

   ip link set <interface> up

   3.2 Enable internet in the arch in USB

   wpa_supplicant -B -i interface -c <(wpa_passphrase "MYSSID" "passphrase")

   3.3 Enable dhcpd

   dhcpcd <interface>

3. Check if you have internet

   ping google.com
   ping 8.8.8.8

4. Mount the needed fs of your live usb arch to your computer

   mount -o bind /sys /mnt/sys
   mount -o bind /proc /mnt/proc
   mount -o bind /dev /mnt/dev

5. Reset the network in order for the route/dns stuff to be setup.

   dhclient eth0
   # or
   dhcpcd

6. Chroot

   chroot /mnt

7. Check internet connection

   ping 8.8.8.8
   ping google.com

   If success on 8.8.8.8 but failure on google.com, then check your dns. For that check your /etc/resolv.conf file. or if not check this link

If you ever delete /etc/ssl/certs/ca-certificates.cert then

pacman -S ca-certificates-utils

My touchpad controls (needs to be worked on) is here Put it in /etc/X11/xorg.conf.d/