teddiherring
commented
7 months ago Hi Zhenlu,
Thanks for your interest! I am not sure how to fix this problem. I think the best option is to reach out to the experts at SimPEG. I invite you to join the SimPEG Mattermost channel and ask your question here as they will be likely be able to help! https://mattermost.softwareunderground.org/simpeg
All the best,
Teddi Herring, PhD (she/her) Postdoctoral Associate, Department of Civil Engineering, University of Calgary Communications Director, Canadian Permafrost Association
From: ZhenluRen @.> Date: Thursday, April 18, 2024 at 2:05 AM To: simpeg-research/Herring-2021-Hybrid-ERT-Inversion @.> Cc: Subscribed @.***> Subject: [simpeg-research/Herring-2021-Hybrid-ERT-Inversion] Failed to run the example (Issue #2) [△EXTERNAL]
Dear Dr. Herring,
I'm very interested in the new ERT inversion methods and I found your project. I installed the code following your instructions, however, when I tried to run the first cell of the file 'frozen layer.ipynb', there was an error appeared (please see the attached screenshots).
I also refered to the issue (Link:geoscixyz/geosci-labs#43https://github.com/geoscixyz/geosci-labs/issues/43), but the error still exists, (please see the attached screenshot).
Could you please help me out this issue? Thank you in advance.
Best regards, Zhenlu Ren 1.png (view on web)https://github.com/simpeg-research/Herring-2021-Hybrid-ERT-Inversion/assets/80757915/fbf63702-b646-497b-a6eb-0cc649b374ce 2.png (view on web)https://github.com/simpeg-research/Herring-2021-Hybrid-ERT-Inversion/assets/80757915/ab8906d2-9b85-4fbc-bb73-fc95938207a1 3.png (view on web)https://github.com/simpeg-research/Herring-2021-Hybrid-ERT-Inversion/assets/80757915/d6824735-4183-4ea2-b2a2-a4cb6dec03c7
— Reply to this email directly, view it on GitHubhttps://github.com/simpeg-research/Herring-2021-Hybrid-ERT-Inversion/issues/2, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ABV43HY7KCHEISVS4CEOOALY555E7AVCNFSM6AAAAABGMX46QOVHI2DSMVQWIX3LMV43ASLTON2WKOZSGI2TAMBSG43TINI. You are receiving this because you are subscribed to this thread.Message ID: @.***>
ZhenluRen
Dear Dr. Herring,
I'm very interested in the new ERT inversion methods and I found your project. I installed the code following your instructions, however, when I tried to run the first cell of the file 'frozen layer.ipynb', there was an error appeared (please see the attached screenshots).
I also refered to the issue (Link:https://github.com/geoscixyz/geosci-labs/issues/43), but the error still exists, (please see the attached screenshot).
Could you please help me out this issue? Thank you in advance.
Best regards, Zhenlu Ren
