search

slic3r / Slic3r

Open Source toolpath generator for 3D printers
https://slic3r.org/
GNU Affero General Public License v3.0
3.35k stars 1.29k forks source link

403 Forbidden #3301

Closed usernamevalis closed 8 years ago

usernamevalis commented 8 years ago

Hi

When I try download Slic3r I get a 403 Forbidden error - the url is :http://dl.slic3r.org/mac/

Thanks

lordofhyphens commented 8 years ago

Not seeing the problem when I just tried; probably just a transient issue with the host or something. Try again :)

dchosking commented 8 years ago

I get this same issue on the windows links, I have not been able to download it for months. Other users are having this same issue https://www.reddit.com/r/3Dprinting/comments/4pof4w/can_anyone_upload_the_latest_slic3r_for_me_the/

lordofhyphens commented 8 years ago

Don't know what is going on, as it just worked for me.

lordofhyphens commented 8 years ago

https://bintray.com/lordofhyphens/Slic3r/slic3r_dev

For 1.3.0-dev (as it comes off of the build server).

dchosking commented 8 years ago

image

This is a screen shot of what i get when trying to download, seems like an authentication issue to me

lordofhyphens commented 8 years ago

I literally just did a download with no authentication. On my phone. It's likely to be some transient issue. It's not something I can do anything about.

image

That reddit thread was also from three months ago. The OP also never replied again.

dchosking commented 8 years ago

It is strange, i just tried on my phone and it seems to work just fine. My phone is even running on the same network as the pc but i cant seem to download it via a browser on my desktop.

lordofhyphens commented 8 years ago

I'd look at your PC/browser, I think we can rule out the server itself in this case.

dchosking commented 8 years ago

Right, i am going to grab my work laptop and give that a go, it was formatted around a week ago so should be a good test

\ Edit

So i still get the same result even using a different computer

lordofhyphens commented 8 years ago

I don't know what to tell you, I can't reproduce the problem and I have no access to debug the server itself. Your options are to get the OSX build from Prusa3d.com or build 1.3.0-dev from git or keep digging.

https://github.com/alexrj/Slic3r/wiki/Running-Slic3r-from-git-on-OS-X

bmsimo commented 7 years ago

I had The same Problem , turned out They were Blocking my country's IP , So i used A VPN and it worked!

rspencer01 commented 7 years ago

This seems to be a persistent problem. Recognizing that you don't have access to the server, but that this is a pain for people from certain areas (I had to ssh into a server I owned in a different country), perhaps it might do to put a disclaimer near the link at the least? Or a link to a mirror? I'd also perhaps suggest to your host that blocking certain IPs is exceptionally bad practice, as it is hurting your (and hence their) brand.

lordofhyphens commented 7 years ago

@alexrj

On Aug 6, 2017 1:19 PM, "Robert Spencer" notifications@github.com wrote:

This seems to be a persistent problem. Recognizing that you don't have access to the server, but that this is a pain for people from certain areas (I had to ssh into a server I owned in a different country), perhaps it might do to put a disclaimer near the link at the least? Or a link to a mirror? I'd also perhaps suggest to your host that blocking certain IPs is exceptionally bad practice, as it is hurting your (and hence their) brand.

— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/alexrj/Slic3r/issues/3301#issuecomment-320523259, or mute the thread https://github.com/notifications/unsubscribe-auth/AAB8CiorQ5EBJbfoMfc6wF85hlmnqYUIks5sVgOagaJpZM4IDpg8 .