Error entering base coordinates in serial terminal

sparkfun / SparkFun_RTK_Firmware

Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.

https://docs.sparkfun.com/SparkFun_RTK_Firmware/

Other

82 stars 47 forks source link

Error entering base coordinates in serial terminal #779

Closed amlago closed 3 months ago

amlago commented 3 months ago

Error entering base coordinates in serial terminal.

Facet v4.1 Using the serial terminal program, the base coordinates cannot be entered. The user enters the coordinates but they do not change on the screen or are recorded in memory. I tried various formats but they all fail. From the wifi configuration, the base coordinates can be changed and it works fine. Regards

PaulZC commented 3 months ago

Hi Angel (@amlago ),

I have tested this using different formats and it is working OK for me:

Can you please share some screenshots?

Thank you, Paul

amlago commented 3 months ago

Hi Paul. What a strange thing that's happening to my Facet. I'll try entering coordinates again later and send you the screenshots. As I told you, everything works fine for me in the wifi configuration. See you soon. Regards

amlago commented 3 months ago

Hi Paul. Everything works fine. I was making a mistake when entering the data. I was entering the lat, long and height coordinates all together separated by commas. They are entered one by one. Something I already knew but I had a slow thinking day. Thank you very much for answering and apologies. greetings Angel

PaulZC commented 3 months ago

No problem Angel, Have a nice afternoon, Paul