After establishing an NSA connection correctly and being able to ping Google and start a download using curl from srsUE, the connection breaks after a few seconds/min.
Setup Details
The testbed consists of 2 Ettus X310 with UBX160 spaced about 1 meter apart, 5G multiband dipole antennas, OS Ubuntu 18.04 and UHD 4.2.
NR MCS fixed at 5/10 to increase stability, TX and RX gain fixed at 20.
When this happens, the channel response shown by the srsue GUI shows abrupt changes, essentially collapses for a few moments and the NR constellation becomes much less defined, after few "drops" the communication stops.
Issue Description
After establishing an NSA connection correctly and being able to ping Google and start a download using curl from srsUE, the connection breaks after a few seconds/min.
Setup Details
The testbed consists of 2 Ettus X310 with UBX160 spaced about 1 meter apart, 5G multiband dipole antennas, OS Ubuntu 18.04 and UHD 4.2. NR MCS fixed at 5/10 to increase stability, TX and RX gain fixed at 20.
Expected Behavior
Communication should remain stable
Actual Behaviour
---------Signal-----------|-----------------DL-----------------|-----------UL----------- rat pci rsrp pl cfo | mcs snr iter brate bler ta_us | mcs buff brate bler lte 1 -49 49 2.6k | 0 22 0.0 0.0 0% 1.0 | 0 0.0 0.0 0% nr 500 0 0 1.8k | 5 15 1.0 1.9M 0% 0.0 | 5 1.4k 128k 36% lte 1 -49 49 2.7k | 0 23 0.0 0.0 0% 1.0 | 0 0.0 0.0 0% nr 500 0 0 1.8k | 5 15 1.0 2.0M 0% 0.0 | 5 1.8k 113k 36% lte 1 -49 49 2.7k | 0 24 0.0 0.0 0% 1.0 | 0 0.0 0.0 0% nr 500 0 0 1.8k | 5 15 1.0 2.4M 0% 0.0 | 5 2.2k 133k 34% lte 1 -49 49 2.7k | 0 24 0.0 0.0 0% 1.0 | 0 0.0 0.0 0% nr 500 0 0 1.8k | 5 15 1.0 2.8M 0% 0.0 | 5 7.4k 241k 44% lte 1 -49 49 2.7k | 0 24 0.0 0.0 0% 1.0 | 0 0.0 0.0 0% nr 500 0 0 1.9k | 5 15 1.0 2.5M 0% 0.0 | 5 4.9k 266k 42% lte 1 -49 49 2.7k | 0 24 0.0 0.0 0% 1.0 | 0 0.0 0.0 0% nr 500 0 0 1.9k | 5 15 1.0 2.8M 0% 0.0 | 5 5.9k 282k 45% lte 1 -49 49 2.7k | 0 24 0.0 0.0 0% 1.0 | 0 0.0 0.0 0% nr 500 0 0 1.9k | 5 15 1.0 3.0M 0% 0.0 | 5 0.0 476k 41% 2023-10-16T12:50:46.432169 [PHY0-NR] [W] [ 1150] PBCH-MIB: CRC failed 2023-10-16T12:50:46.442230 [PHY0-NR] [W] [ 1160] PBCH-MIB: CRC failed 2023-10-16T12:50:46.452107 [PHY0-NR] [W] [ 1170] PBCH-MIB: CRC failed 2023-10-16T12:50:46.462145 [PHY0-NR] [W] [ 1180] PBCH-MIB: CRC failed 2023-10-16T12:50:46.472183 [PHY0-NR] [W] [ 1190] PBCH-MIB: CRC failed 2023-10-16T12:50:46.482227 [PHY0-NR] [W] [ 1200] PBCH-MIB: CRC failed 2023-10-16T12:50:46.488197 [PHY ] [W] [ 1206] SYNC: Out-of-sync detected in PSS/SSS 2023-10-16T12:50:46.489232 [PHY ] [W] [ 1207] SYNC: Out-of-sync detected in PSS/SSS 2023-10-16T12:50:46.490256 [PHY ] [W] [ 1208] SYNC: Out-of-sync detected in PSS/SSS 2023-10-16T12:50:46.491325 [PHY ] [W] [ 1209] SYNC: Out-of-sync detected in PSS/SSS RF status: O=0, U=1, L=0 lte 1 -54 54 2.6k | 0 18 0.0 0.0 0% 1.0 | 0 0.0 0.0 0% nr 500 -1 0 2.3k | 5 14 1.0 3.0M 0% 0.0 | 5 2.4k 106k 80% RF status: O=0, U=1, L=0 lte 1 0 0 0.0 | 0 0 0.0 -nan 0% 0.0 | 0 0.0 -nan 0% nr 500 0 0 0.0 | 0 0 0.0 -nan 0% 0.0 | 0 2.4k -nan 0% lte 1 0 0 0.0 | 0 0 0.0 -nan 0% 0.0 | 0 0.0 -nan 0% nr 500 0 0 0.0 | 0 0 0.0 -nan 0% 0.0 | 0 2.4k -nan 0% lte 1 0 0 0.0 | 0 0 0.0 -nan 0% 0.0 | 0 0.0 -nan 0% nr 500 0 0 0.0 | 0 0 0.0 -nan 0% 0.0 | 0 2.4k -nan 0%
Additional Information
When this happens, the channel response shown by the srsue GUI shows abrupt changes, essentially collapses for a few moments and the NR constellation becomes much less defined, after few "drops" the communication stops.
Is it possible to plot also NR channel in srsenb?