A Python implementation based on unofficial documentation of the client side interface to the Tesla Motors Owner API, which provides functionality to monitor and control Tesla products remotely.
The Owner API will stop working as vehicles begin requiring end-to-end command authentication using the Tesla Vehicle Command Protocol. Pre-2021 Model S and X vehicles do not support this new protocol and remain controllable using TeslaPy.
This module depends on Python requests, requests_oauthlib and websocket-client. It requires Python 3.10+ when using urllib3 2.0, which comes with requests 2.30.0+, or you can pin urllib3 to 1.26.x by installing urllib3<2
.
The Tesla
class extends requests_oauthlib.OAuth2Session
which extends requests.Session
and therefore inherits methods like get()
and post()
that can be used to perform API calls. Module characteristics:
TeslaPy 2.0.0+ no longer implements headless authentication. The constructor differs and takes these arguments:
Argument | Description |
---|---|
email |
SSO identity |
verify |
(optional) verify SSL certificate |
proxy |
(optional) URL of proxy server |
retry |
(optional) number of connection retries or Retry instance |
timeout |
(optional) Connect/read timeout |
user_agent |
(optional) the User-Agent string |
authenticator |
(optional) Function with one argument, the authorization URL, that returns the redirected URL |
cache_file |
(optional) path to cache file used by default loader and dumper |
cache_loader |
(optional) function that returns the cache dict |
cache_dumper |
(optional) function with one argument, the cache dict |
sso_base_url |
(optional) URL of SSO service, set to https://auth.tesla.cn/ if your email is registered in another region |
state |
(optional) state string for CSRF protection |
code_verifier |
(optional) PKCE code verifier string |
app_user_agent |
(optional) X-Tesla-User-Agent string |
TeslaPy 2.1.0+ no longer implements RFC 7523 and uses the SSO token for all API requests.
The class will open Tesla's SSO page in the system's default web browser to authenticate. After successful authentication, a Page not found will be displayed and the URL should start with https://auth.tesla.com/void/callback
, which is the redirected URL. The class will use stdio
to get the full redirected URL from the web browser by default. You need to copy and paste the full URL from the web browser to the console to continue aquirering API tokens. You can use a pluggable authenticator method to automate this, for example using pywebview or selenium. It is also possible to use an SSO refresh token obtained by a 3rd party authentication app.
The convenience method api()
uses named endpoints listed in endpoints.json to perform calls, so the module does not require changes if the API is updated. api()
substitutes path variables in the URI and calls fetch_token()
when needed. Any error message returned by the API is raised as an HTTPError
exception. Additionally, the class implements the following methods:
Call | Description |
---|---|
request() |
performs API call using relative or absolute URL, serialization and error message handling |
new_code_verifier() |
generates code verifier for PKCE |
authorization_url() |
forms authorization URL with PKCE extension and tries to detect the accounts registered region |
fetch_token() |
requests an SSO token using Authorization Code grant with PKCE extension |
refresh_token() |
requests an SSO token using Refresh Token grant |
close() |
remove all requests adapter instances |
logout() |
removes token from cache, returns logout URL and optionally signs out using system's default web browser |
vehicle_list() |
returns a list of Vehicle objects |
battery_list() |
returns a list of Battery objects |
solar_list() |
returns a list of SolarPanel objects |
The Vehicle
class extends dict
and stores vehicle data returned by the Owner API, which is a pull API. The get_vehicle_summary()
and get_vehicle_data()
calls update the Vehicle
instance, merging data. The streaming API pushes vehicle data on-change after subscription. The stream()
method takes an optional argument, a callback function that is called with one argument, a dict holding the changed data. The Vehicle
object is always updated with the pushed data. If there are no changes within 10 seconds, the vehicle stops streaming data. The stream()
method has two more optional arguments to control restarting. Additionally, the class implements the following methods:
Call | Online | Description |
---|---|---|
api() |
Yes | performs an API call to named endpoint requiring vehicle_id with optional arguments |
get_vehicle_summary() |
No | gets the state of the vehicle (online, asleep, offline) |
available() |
No | checks if the vehicle is online based on cached data or refreshed status when aged out |
sync_wake_up() |
No | wakes up and waits for the vehicle to come online |
decode_option() |
No | lookup option code description (read from option_codes.json) |
option_code_list() 1 |
No | lists known descriptions of the vehicle option codes |
get_vehicle_data() |
Yes | get vehicle data for selected endpoints, defaults to all endpoints |
get_vehicle_location_data() |
Yes | gets the basic and location data for the vehicle |
get_nearby_charging_sites() |
Yes | lists nearby Tesla-operated charging stations |
get_service_scheduling_data() |
No | retrieves next service appointment for this vehicle |
get_charge_history() 2 |
No | lists vehicle charging history data points |
mobile_enabled() |
Yes | checks if the Mobile Access setting is enabled in the car |
compose_image() 3 |
No | composes a vehicle image based on vehicle option codes |
dist_units() |
No | converts distance or speed units to GUI setting of the vehicle |
temp_units() |
No | converts temperature units to GUI setting of the vehicle |
gui_time() |
No | returns timestamp or current time formatted to GUI setting |
last_seen() |
No | returns vehicle last seen natural time |
decode_vin() |
No | decodes the vehicle identification number to a dict |
command() |
Yes | wrapper around api() for vehicle command response error handling |
1 Option codes appear to be deprecated.
2 Car software version 2021.44.25 or higher required, Data Sharing must be enabled and you must be the primary vehicle owner.
3 Pass vehicle option codes to this method now options codes are deprecated.
Only methods with No in the Online column are available when the vehicle is asleep or offline. These methods will not prevent your vehicle from sleeping. Other methods and API calls require the vehicle to be brought online by using sync_wake_up()
and can prevent your vehicle from sleeping if called within too short a period.
The Product
class extends dict
and is initialized with product data of Powerwalls and solar panels returned by the API. Additionally, the class implements the following methods:
Call | Description |
---|---|
api() |
performs an API call to named endpoint requiring battery_id or site_id with optional arguments |
get_history_data() |
Retrieve live status of product |
get_calendar_history_data() |
Retrieve live status of product |
command() |
wrapper around api() for battery command response error handling |
The Battery
class extends Product
and stores Powerwall data returned by the API, updated by get_battery_data()
. Additionally, the class implements the following methods:
Call | Description |
---|---|
get_battery_data() |
Retrieve detailed state and configuration of the battery |
set_operation() |
Set battery operation to self_consumption, backup or autonomous |
set_backup_reserve_percent() |
Set the minimum backup reserve percent for that battery |
set_import_export() |
Sets the battery grid import and export settings |
get_tariff() |
Get the tariff rate data |
set_tariff() |
Set the tariff rate data. The data can be created manually, or generated by create_tariff |
create_tariff() |
Creates a correctly formatted dictionary of tariff data |
The SolarPanel
class extends Product
and stores solar panel data returned by the API, updated by get_site_data()
. Additionally, the class implements the following methods:
Call | Description |
---|---|
get_site_data() |
Retrieve current site generation data |
Basic usage of the module:
import teslapy
with teslapy.Tesla('elon@tesla.com') as tesla:
vehicles = tesla.vehicle_list()
vehicles[0].sync_wake_up()
vehicles[0].command('ACTUATE_TRUNK', which_trunk='front')
vehicles[0].get_vehicle_data()
print(vehicles[0]['vehicle_state']['car_version'])
TeslaPy 2.4.0 and 2.5.0 automatically calls get_vehicle_data()
and TeslaPy 2.6.0+ automatically calls get_latest_vehicle_data()
when a key is not found. This example works for TeslaPy 2.6.0+:
import teslapy
with teslapy.Tesla('elon@tesla.com') as tesla:
vehicles = tesla.vehicle_list()
print(vehicles[0]['display_name'] + ' last seen ' + vehicles[0].last_seen() +
' at ' + str(vehicles[0]['charge_state']['battery_level']) + '% SoC')
Example output:
Tim's Tesla last seen 6 hours ago at 87% SoC
The Tesla
class implements a pluggable authentication method. If you want to implement your own method to handle the SSO page and retrieve the redirected URL after authentication, you can pass a function as an argument to the constructor, that takes the authentication URL as an argument and returns the redirected URL. The authenticator
argument is accessible as an attribute as well.
Example using a webview component that displays the SSO page in its own native GUI window.
import teslapy
import webview
def custom_auth(url):
result = ['']
window = webview.create_window('Login', url)
def on_loaded():
result[0] = window.get_current_url()
if 'void/callback' in result[0].split('?')[0]:
window.destroy()
window.loaded += on_loaded
webview.start()
return result[0]
with teslapy.Tesla('elon@tesla.com', authenticator=custom_auth) as tesla:
tesla.fetch_token()
Example using selenium to automate web browser interaction. The SSO page returns a 403 when navigator.webdriver
is set and currently only Chrome, Opera and Edge Chromium can prevent this.
import teslapy
from selenium import webdriver
from selenium.webdriver.support import expected_conditions as EC
from selenium.webdriver.support.ui import WebDriverWait
def custom_auth(url):
options = webdriver.ChromeOptions()
options.add_argument("--disable-blink-features=AutomationControlled")
with webdriver.Chrome(chrome_options=options) as browser:
browser.get(url)
WebDriverWait(browser, 300).until(EC.url_contains('void/callback'))
return browser.current_url
with teslapy.Tesla('elon@tesla.com', authenticator=custom_auth) as tesla:
tesla.fetch_token()
TeslaPy 2.2.0 introduced the authorization_url()
method to get the SSO page URL and the option to supply the redirected URL as keyword argument authorization_response
to fetch_token()
after authentication.
import teslapy
tesla = teslapy.Tesla('elon@tesla.com')
if not tesla.authorized:
print('Use browser to login. Page Not Found will be shown at success.')
print('Open this URL: ' + tesla.authorization_url())
tesla.fetch_token(authorization_response=input('Enter URL after authentication: '))
vehicles = tesla.vehicle_list()
print(vehicles[0])
tesla.close()
Support for staged authorization has been added to TeslaPy 2.5.0. The keyword arguments state
and code_verifier
are accepted by the Tesla
class constructor, the authorization_url()
method and the fetch_token()
method.
import teslapy
# First stage
tesla = teslapy.Tesla('elon@tesla.com')
if not tesla.authorized:
state = tesla.new_state()
code_verifier = tesla.new_code_verifier()
print('Use browser to login. Page Not Found will be shown at success.')
print('Open: ' + tesla.authorization_url(state=state, code_verifier=code_verifier))
tesla.close()
# Second stage
tesla = teslapy.Tesla('elon@tesla.com', state=state, code_verifier=code_verifier)
if not tesla.authorized:
tesla.fetch_token(authorization_response=input('Enter URL after authentication: '))
vehicles = tesla.vehicle_list()
print(vehicles[0])
tesla.close()
TeslaPy 2.4.0+ supports usage of a refresh token obtained by 3rd party authentication apps. The refresh token is used to obtain an access token and both are cached for persistence, so you only need to supply the refresh token only once.
import teslapy
with teslapy.Tesla('elon@tesla.com') as tesla:
if not tesla.authorized:
tesla.refresh_token(refresh_token=input('Enter SSO refresh token: '))
vehicles = tesla.vehicle_list()
print(vehicles[0])
To use your systems's default web browser to sign out of the SSO page and clear the token from cache:
tesla.logout(sign_out=True)
If using pywebview, you can clear the token from cache and get the logout URL to display a sign out window:
window = webview.create_window('Logout', tesla.logout())
window.start()
Selenium does not store cookies, just clear the token from cache:
tesla.logout()
The Tesla
class implements a pluggable cache method. If you don't want to use the default disk caching, you can pass a function to load and return the cache dict, and a function that takes a dict as an argument to dump the cache dict, as arguments to the constructor. The cache_loader
and cache_dumper
arguments are accessible as attributes as well.
import json
import sqlite3
import teslapy
def db_load():
con = sqlite3.connect('cache.db')
cur = con.cursor()
cache = {}
try:
for row in cur.execute('select * from teslapy'):
cache[row[0]] = json.loads(row[1])
except sqlite3.OperationalError:
pass
con.close()
return cache
def db_dump(cache):
con = sqlite3.connect('cache.db')
con.execute('create table if not exists teslapy (email text primary key, data json)')
for email, data in cache.items():
con.execute('replace into teslapy values (?, ?)', [email, json.dumps(data)])
con.commit()
con.close()
with teslapy.Tesla('elon@tesla.com', cache_loader=db_load, cache_dumper=db_dump) as tesla:
tesla.fetch_token()
The Safety Scores are obtained though another API. TeslaPy 2.1.0 introduced absolute URL support for accessing non-Owner API endpoints.
from teslapy import Tesla
with Tesla('elon@tesla.com') as tesla:
vehicles = tesla.vehicle_list()
url = 'https://akamai-apigateway-vfx.tesla.com/safety-rating/daily-metrics'
print(tesla.get(url, params={'vin': vehicles[0]['vin'], 'deviceLanguage': 'en',
'deviceCountry': 'US', 'timezone': 'UTC'}))
TeslaPy uses an adjustable connect and read timeout of 10 seconds by default. Refer to the timeouts section for more details. TeslaPy does not retry failed or timed out connections by default, which can be enabled with the retry
parameter.
tesla = teslapy.Tesla('elon@tesla.com', retry=2, timeout=15)
A robust program accounting for network failures has a retry strategy, that includes the total number of retry attempts to make, the HTTP response codes to retry on and optionally a backoff factor. Refer to the retry module for more details.
Be aware that Tesla may temporarily block your account if you are hammering the servers too much.
import teslapy
retry = teslapy.Retry(total=2, status_forcelist=(500, 502, 503, 504))
with teslapy.Tesla('elon@tesla.com', retry=retry) as tesla:
vehicles = tesla.vehicle_list()
print(vehicles[0])
vehicles[0].command('FLASH_LIGHTS') # Raises exception
The line after the context manager will raise an exception when using TeslaPy 2.5.0+ because it explicitly closes the requests connection handler when the context manager exits. Earlier versions would not raise an exception and retries would not work.
Take a look at cli.py, menu.py or gui.py for more code examples.
These are the major commands:
Endpoint | Parameters | Value |
---|---|---|
UNLOCK | ||
LOCK | ||
HONK_HORN | ||
FLASH_LIGHTS | ||
CLIMATE_ON | ||
CLIMATE_OFF | ||
MAX_DEFROST | on |
true or false |
CHANGE_CLIMATE_TEMPERATURE_SETTING | driver_temp , passenger_temp |
temperature in celcius |
SET_CLIMATE_KEEPER_MODE | climate_keeper_mode |
0=off, 1=on, 2=dog, 3=camp |
HVAC_BIOWEAPON_MODE | on |
true or false |
SCHEDULED_DEPARTURE 1 | enable , departure_time , preconditioning_enabled , preconditioning_weekdays_only , off_peak_charging_enabled , off_peak_charging_weekdays_only , end_off_peak_time |
true or false , minutes past midnight |
SCHEDULED_CHARGING 1 | enable , time |
true or false , minutes past midnight |
CHARGING_AMPS 1 | charging_amps |
between 0-32 |
SET_CABIN_OVERHEAT_PROTECTION | on , fan_only |
true or false |
CHANGE_CHARGE_LIMIT | percent |
percentage |
SET_VEHICLE_NAME | vehicle_name |
name |
CHANGE_SUNROOF_STATE | state |
vent or close |
WINDOW_CONTROL 2 | command , lat , lon |
vent or close , 0 , 0 |
ACTUATE_TRUNK | which_trunk |
rear or front |
REMOTE_START | ||
TRIGGER_HOMELINK | lat , lon |
current lattitude and logitude |
CHARGE_PORT_DOOR_OPEN | ||
CHARGE_PORT_DOOR_CLOSE | ||
START_CHARGE | ||
STOP_CHARGE | ||
SET_COP_TEMP | temp |
temperature in celcius |
MEDIA_TOGGLE_PLAYBACK | ||
MEDIA_NEXT_TRACK | ||
MEDIA_PREVIOUS_TRACK | ||
MEDIA_NEXT_FAVORITE | ||
MEDIA_PREVIOUS_FAVORITE | ||
MEDIA_VOLUME_UP | ||
MEDIA_VOLUME_DOWN | ||
SET_VALET_MODE | on , password |
true or false , 4 digit PIN |
RESET_VALET_PIN | ||
SPEED_LIMIT_ACTIVATE | pin |
4 digit PIN |
SPEED_LIMIT_DEACTIVATE | pin |
4 digit PIN |
SPEED_LIMIT_SET_LIMIT | limit_mph |
between 50-90 |
SPEED_LIMIT_CLEAR_PIN | pin |
4 digit PIN |
SCHEDULE_SOFTWARE_UPDATE | offset_sec |
seconds |
CANCEL_SOFTWARE_UPDATE | ||
SET_SENTRY_MODE | on |
true or false |
REMOTE_SEAT_HEATER_REQUEST | heater , level |
seat 0-5, level 0-3 |
REMOTE_AUTO_SEAT_CLIMATE_REQUEST | auto_seat_position , auto_climate_on |
1-2, true or false |
REMOTE_SEAT_COOLING_REQUEST | seat_position , seat_cooler_level |
|
REMOTE_STEERING_WHEEL_HEATER_REQUEST | on |
true or false |
1 requires car version 2021.36 or higher. Setting charging_amps
to 2 or 3 results in 3A and setting to 0 or 1 results in 2A.
2 close
requires lat
and lon
values to be near the current location of the car.
Basic exception handling:
try:
vehicles[0].command('HONK_HORN')
except teslapy.HTTPError as e:
print(e)
All requests.exceptions
and oauthlib.oauth2.rfc6749.errors
classes are imported by the module. When the vehicle is asleep or offline and the vehicle needs to be online for the API endpoint to be executed, the following exception is raised: requests.exceptions.HTTPError: 408 Client Error: vehicle unavailable
. The exception can be caught as teslapy.HTTPError
.
Additionally, sync_wake_up()
raises teslapy.VehicleError
when the vehicle does not come online within the specified timeout. And command()
also raises teslapy.VehicleError
when the vehicle command response result is False
. For instance, if one of the media endpoints is called and there is no user present in the vehicle, the following exception is raised: VehicleError: user_not_present
.
As of January 29, 2021, Tesla updated this endpoint to follow RFC 7523 and requires the use of the SSO service (auth.tesla.com) for authentication. If you get a requests.exceptions.HTTPError: 400 Client Error: endpoint_deprecated:_please_update_your_app for url: https://owner-api.teslamotors.com/oauth/token
then you are probably using an old version of this module.
As of September 3, 2021, Tesla has added ReCaptcha to the login form. This caused the headless login implemented by TeslaPy to break. If you get a ValueError: Credentials rejected. Recaptcha is required
and you are using correct credentials then you are probably using an old version of this module.
As of January 12, 2022, Tesla has deprecated the use of RFC 7523 tokens and requires the SSO tokens to be used for API access. If you get a requests.exceptions.HTTPError: 401 Client Error: Unauthorized for url: https://owner-api.teslamotors.com/api/1/vehicles
and you are using correct credentials then you are probably using an old version of this module.
As of January 7, 2024, Tesla has removed the VEHICLE_LIST endpoint. If you get a requests.exceptions.HTTPError: 412 Client Error: Endpoint is only available on fleetapi. Visit https://developer.tesla.com/docs for more info
then you are probably using an old version of this module.
The source repository contains three demo applications that optionally use pywebview version 3.0 or higher or selenium version 3.13.0 or higher to automate weblogin. Selenium 4.0.0 or higher is required for Edge Chromium.
cli.py is a simple CLI application that can use almost all functionality of the TeslaPy module. The filter option allows you to select a product if more than one product is linked to your account. API output is JSON formatted:
usage: cli.py [-h] -e EMAIL [-f FILTER] [-a API [KEYVALUE ...]] [-k KEYVALUE]
[-c COMMAND] [-t TIMEOUT] [-p PROXY] [-R REFRESH] [-U URL] [-l]
[-o] [-v] [-w] [-g] [-b] [-n] [-m] [-s] [-d] [-r] [-S] [-H] [-V]
[-L] [-u] [--chrome] [--edge]
Tesla Owner API CLI
optional arguments:
-h, --help show this help message and exit
-e EMAIL login email
-f FILTER filter on id, vin, etc.
-a API [KEYVALUE ...]
API call endpoint name
-k KEYVALUE API parameter (key=value)
-c COMMAND product command endpoint
-t TIMEOUT connect/read timeout
-p PROXY proxy server URL
-R REFRESH use this refresh token
-U URL SSO service base URL
-l, --list list all selected vehicles/batteries
-o, --option list vehicle option codes
-v, --vin vehicle identification number decode
-w, --wake wake up selected vehicle(s)
-g, --get get rollup of all vehicle data
-b, --battery get detailed battery state and config
-n, --nearby list nearby charging sites
-m, --mobile get mobile enabled state
-s, --site get current site generation data
-d, --debug set logging level to debug
-r, --stream receive streaming vehicle data on-change
-S, --service get service self scheduling eligibility
-H, --history get charging history data
-B, --basic get basic vehicle data only
-G, --location get location (GPS) data, wake as needed
-V, --verify disable verify SSL certificate
-L, --logout clear token from cache and logout
-u, --user get user account details
--chrome use Chrome WebDriver
--edge use Edge WebDriver
Example usage of cli.py:
python cli.py -e elon@tesla.com -w -a ACTUATE_TRUNK -k which_trunk=front
menu.py is a menu-based console application that displays vehicle data in a tabular format. The application depends on geopy to convert GPS coordinates to a human readable address:
gui.py is a graphical user interface using tkinter
. API calls are performed asynchronously using threading. The GUI supports auto refreshing of the vehicle data and displays a composed vehicle image. Note that the vehicle will not go to sleep, if auto refresh is enabled. The application depends on geopy to convert GPS coordinates to a human readable address. If Tcl/Tk GUI toolkit version of your Python installation is lower than 8.6 then pillow is required to display the vehicle image. User preferences, such as which web browser to use for authentication, persist upon application restart.
The vehicle charging history can be displayed in a graph as well.
The demo applications can be containerized using the provided Dockerfile. A bind volume is used to store cache.json and gui.ini in the current directory on the host machine:
sudo docker build -t teslapy .
xhost +local:*
sudo docker run -ti --net=host --privileged -v "$(pwd)":/home/tsla teslapy
Example output of get_vehicle_data()
or python cli.py -e elon@tesla.com -w -g
below:
{
"id": 12345678901234567,
"vehicle_id": 1234567890,
"vin": "5YJ3E111111111111",
"display_name": "Tim's Tesla",
"option_codes": null,
"color": null,
"tokens": [
"1234567890abcdef",
"abcdef1234567890"
],
"state": "online",
"in_service": false,
"id_s": "12345678901234567",
"calendar_enabled": true,
"api_version": 6,
"backseat_token": null,
"backseat_token_updated_at": null,
"user_id": 123456,
"charge_state": {
"battery_heater_on": false,
"battery_level": 44,
"battery_range": 99.84,
"charge_current_request": 16,
"charge_current_request_max": 16,
"charge_enable_request": true,
"charge_energy_added": 14.54,
"charge_limit_soc": 90,
"charge_limit_soc_max": 100,
"charge_limit_soc_min": 50,
"charge_limit_soc_std": 90,
"charge_miles_added_ideal": 66.5,
"charge_miles_added_rated": 66.5,
"charge_port_cold_weather_mode": false,
"charge_port_door_open": true,
"charge_port_latch": "Engaged",
"charge_rate": 455.7,
"charge_to_max_range": false,
"charger_actual_current": 0,
"charger_phases": null,
"charger_pilot_current": 16,
"charger_power": 100,
"charger_voltage": 2,
"charging_state": "Charging",
"conn_charge_cable": "IEC",
"est_battery_range": 78.13,
"fast_charger_brand": "Tesla",
"fast_charger_present": true,
"fast_charger_type": "Combo",
"ideal_battery_range": 99.84,
"managed_charging_active": false,
"managed_charging_start_time": null,
"managed_charging_user_canceled": false,
"max_range_charge_counter": 1,
"minutes_to_full_charge": 15,
"not_enough_power_to_heat": null,
"scheduled_charging_pending": false,
"scheduled_charging_start_time": null,
"time_to_full_charge": 0.25,
"timestamp": 1569952097456,
"trip_charging": true,
"usable_battery_level": 44,
"user_charge_enable_request": null
},
"climate_state": {
"battery_heater": false,
"battery_heater_no_power": null,
"climate_keeper_mode": "off",
"driver_temp_setting": 21.0,
"fan_status": 3,
"inside_temp": 21.0,
"is_auto_conditioning_on": true,
"is_climate_on": true,
"is_front_defroster_on": false,
"is_preconditioning": false,
"is_rear_defroster_on": false,
"left_temp_direction": 54,
"max_avail_temp": 28.0,
"min_avail_temp": 15.0,
"outside_temp": 13.5,
"passenger_temp_setting": 21.0,
"remote_heater_control_enabled": true,
"right_temp_direction": 54,
"seat_heater_left": 0,
"seat_heater_right": 0,
"side_mirror_heaters": false,
"smart_preconditioning": false,
"timestamp": 1569952097456,
"wiper_blade_heater": false
},
"drive_state": {
"gps_as_of": 1569952096,
"heading": 240,
"latitude": 52.531951,
"longitude": 6.156999,
"native_latitude": 52.531951,
"native_location_supported": 1,
"native_longitude": 6.156999,
"native_type": "wgs",
"power": -100,
"shift_state": null,
"speed": null,
"timestamp": 1569952097456
},
"gui_settings": {
"gui_24_hour_time": true,
"gui_charge_rate_units": "km/hr",
"gui_distance_units": "km/hr",
"gui_range_display": "Rated",
"gui_temperature_units": "C",
"show_range_units": false,
"timestamp": 1569952097456
},
"vehicle_config": {
"can_accept_navigation_requests": true,
"can_actuate_trunks": true,
"car_special_type": "base",
"car_type": "model3",
"charge_port_type": "CCS",
"eu_vehicle": true,
"exterior_color": "SolidBlack",
"has_air_suspension": false,
"has_ludicrous_mode": false,
"key_version": 2,
"motorized_charge_port": true,
"plg": false,
"rear_seat_heaters": 0,
"rear_seat_type": null,
"rhd": false,
"roof_color": "Glass",
"seat_type": null,
"spoiler_type": "None",
"sun_roof_installed": null,
"third_row_seats": "<invalid>",
"timestamp": 1569952097456,
"use_range_badging": true,
"wheel_type": "Pinwheel18"
},
"vehicle_state": {
"api_version": 6,
"autopark_state_v2": "unavailable",
"calendar_supported": true,
"car_version": "2019.32.11.1 d39e85a",
"center_display_state": 2,
"df": 0,
"dr": 0,
"fd_window": 0,
"fp_window": 0,
"ft": 0,
"is_user_present": true,
"locked": false,
"media_state": {
"remote_control_enabled": true
},
"notifications_supported": true,
"odometer": 6963.081561,
"parsed_calendar_supported": true,
"pf": 0,
"pr": 0,
"rd_window": 0,
"remote_start": false,
"remote_start_enabled": true,
"remote_start_supported": true,
"rp_window": 0,
"rt": 0,
"sentry_mode": false,
"sentry_mode_available": true,
"software_update": {
"expected_duration_sec": 2700,
"status": ""
},
"speed_limit_mode": {
"active": false,
"current_limit_mph": 85.0,
"max_limit_mph": 90,
"min_limit_mph": 50,
"pin_code_set": false
},
"sun_roof_percent_open": null,
"sun_roof_state": "unknown",
"timestamp": 1569952097456,
"valet_mode": false,
"valet_pin_needed": true,
"vehicle_name": "Tim's Tesla"
}
}
Example output of get_service_scheduling_data()
or python cli.py -e elon@tesla.com --service
below:
{
"vin": "5YJ3E111111111111",
"next_appt_timestamp": "2021-06-08T13:15:00",
"next_appt_end_timestamp": null,
"show_badge": false
}
Example output of get_battery_data()
or python cli.py -e elon@tesla.com -b
below:
{
"energy_site_id": 111110110110,
"resource_type": "battery",
"site_name": "Elon's House",
"id": "STE10110111-00101",
"gateway_id": "1111100-11-A--AAA11110A1A111",
"asset_site_id": "a1100111-1a11-1aaa-a111-1a0011aa1111",
"energy_left": 0,
"total_pack_energy": 13746,
"percentage_charged": 0,
"battery_type": "ac_powerwall",
"backup_capable": true,
"battery_power": 0,
"sync_grid_alert_enabled": false,
"breaker_alert_enabled": false,
"components": {
"solar": true,
"solar_type": "pv_panel",
"battery": true,
"grid": true,
"backup": true,
"gateway": "teg",
"load_meter": true,
"tou_capable": true,
"storm_mode_capable": true,
"flex_energy_request_capable": false,
"car_charging_data_supported": false,
"off_grid_vehicle_charging_reserve_supported": false,
"vehicle_charging_performance_view_enabled": false,
"vehicle_charging_solar_offset_view_enabled": false,
"battery_solar_offset_view_enabled": true,
"show_grid_import_battery_source_cards": true,
"battery_type": "ac_powerwall",
"configurable": false,
"grid_services_enabled": false
},
"grid_status": "Active",
"backup": {
"backup_reserve_percent": 0,
"events": null
},
"user_settings": {
"storm_mode_enabled": false,
"sync_grid_alert_enabled": false,
"breaker_alert_enabled": false
},
"default_real_mode": "self_consumption",
"operation": "self_consumption",
"installation_date": "2020-01-01T10:10:00+08:00",
"power_reading": [
{
"timestamp": "2021-02-24T04:25:39+08:00",
"load_power": 5275,
"solar_power": 3,
"grid_power": 5262,
"battery_power": 10,
"generator_power": 0
}
],
"battery_count": 1
}
Example output of get_site_data()
or python cli.py -e elon@tesla.com -s
below:
{
"energy_site_id": 111110110110,
"resource_type": "solar",
"id": "111aaa00-111a-11a1-00aa-00a1aa1aa0aa",
"asset_site_id": "a1100111-1a11-1aaa-a111-1a0011aa1111",
"solar_power": 11892.01953125,
"solar_type": "pv_panel",
"storm_mode_enabled": null,
"powerwall_onboarding_settings_set": null,
"sync_grid_alert_enabled": false,
"breaker_alert_enabled": false,
"components": {
"battery": false,
"solar": true,
"solar_type": "pv_panel",
"grid": true,
"load_meter": true,
"market_type": "residential"
},
"energy_left": 0,
"total_pack_energy": 1,
"percentage_charged": 0,
"battery_power": 0,
"load_power": 0,
"grid_status": "Unknown",
"grid_services_active": false,
"grid_power": -11892.01953125,
"grid_services_power": 0,
"generator_power": 0,
"island_status": "island_status_unknown",
"storm_mode_active": false,
"timestamp": "2022-08-15T17:12:26Z",
"wall_connectors": null
}
TeslaPy is available on PyPI:
python -m pip install teslapy 'urllib3<2'
Make sure you have Python 2.7+ or 3.5+ installed on your system. Alternatively, clone the repository to your machine and run demo application cli.py, menu.py or gui.py to get started, after installing requests_oauthlib 0.8.0+, geopy 1.14.0+, pywebview 3.0+ (optional), selenium 3.13.0+ (optional) and websocket-client 0.59+ using PIP as follows:
python -m pip install requests_oauthlib geopy pywebview selenium websocket-client
and install ChromeDriver to use Selenium or on Ubuntu as follows:
sudo apt-get install python3-requests-oauthlib python3-geopy python3-webview python3-selenium python3-websocket