search

usfsoar / NSL_23-24_PayloadMech

Repository for Payload Mechanical section of Nasa Student Launch Challenge
0 stars 0 forks source link

Cut Payload Bulkheads and make Fusion Files #17

Closed JacobLoufek closed 9 months ago

JacobLoufek commented 10 months ago

Make Fusion G-Code for each bulkplate

NOTE: Do tests to figure out sleeve bearing sizes. Create 3-5 different sizes of sleeve bearings to figure out ideal dimensions.

Bulkhead 1. FWD electronics coupler Bulkhead 2. AFT DC motor coupler Bulkhead 3. FWD DC motor coupler Motor Mount Bulkhead 4. Gear Train Extra bulkplate Bulkhead 5. Payload coupler AFT Outer and ACME nut bulkhead Bulkhead 6. Payload coupler AFT inner Bulkhead 7. Payload coupler FWD inner Bulkhead 8. Payload coupler FWD outter / Nosecone

NOTE: Bulkhead 6 and 7 are the same and can use the same G-Code for each.

NOTE: For the stepper coupler bulkplates, use Carbon Fiber and do not add a lip. Make a centering lip out of fiberglass. This will prevent the carbon fiber from shearing and will increase the effective lip thickness.

Ask Jacob for more info.

JacobLoufek commented 9 months ago

All bulkplates for the motor coupler have been cut. Still finishing inner payload couplers