Closed gilvi closed 1 week ago
CentOS Stream 9
After installing it looks fine, but the Storage Manager misses all the options and only shows volume1. No storage pool creation or any available.
My purpose is to add an external disk to set as target for some backups.
PD: I'm new into DSM...
volumes: dsm_disk: services: dsm: container_name: dsm image: vdsm/virtual-dsm environment: DISK_SIZE: "16G" devices:
[+] Running 1/1 ✔ dsm Pulled 1.1s [+] Running 1/1 ✔ Container dsm Recreated 0.1s Attaching to dsm dsm | ❯ Starting Virtual DSM for Docker v7.33... dsm | ❯ For support visit https://github.com/vdsm/virtual-dsm dsm | ❯ CPU: Intel Core i3 4130T | RAM: 4/8 GB | DISK: 12 GB (xfs) | KERNEL: 5.14.0-503.el9.x86_64... dsm | dsm | iptables v1.8.11 (legacy): can't initialize iptables table nat': Table does not exist (do you need to insmod?) dsm | Perhaps iptables or your kernel needs to be upgraded. dsm | ❯ ERROR: The 'ip_tables' kernel module is not loaded. Try this command: sudo modprobe ip_tables iptable_nat dsm | ❯ Notice: port mapping will not work without "USER_PORTS" now. dsm | ❯ Warning: an error occured, falling back to user-mode networking! dsm | ❯ Booting Virtual DSM using QEMU v9.2.2... dsm | [ 0.000000] Initializing cgroup subsys cpuset dsm | [ 0.000000] Initializing cgroup subsys cpu dsm | [ 0.000000] Initializing cgroup subsys cpuacct dsm | [ 0.000000] Linux version 4.4.180+ (root@build3) (gcc version 7.5.0 (GCC) ) #42218 SMP Fri May 5 00:04:19 CST 2023 dsm | [ 0.000000] Command line: root=/dev/sda1 ihd_num=0 netif_num=0 syno_hw_version=VirtualDSM vender_format_version=2 macs=0064a82cc643,0064a82cc644,0064a82cc645,0064a82cc646 dsm | [ 0.000000] KERNEL supported cpus: dsm | [ 0.000000] Intel GenuineIntel dsm | [ 0.000000] AMD AuthenticAMD dsm | [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 dsm | [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' dsm | [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' dsm | [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' dsm | [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. dsm | [ 0.000000] e820: BIOS-provided physical RAM map: dsm | [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable dsm | [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved dsm | [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved dsm | [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffd6fff] usable dsm | [ 0.000000] BIOS-e820: [mem 0x000000003ffd7000-0x000000003fffffff] reserved dsm | [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved dsm | [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved dsm | [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved dsm | [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved dsm | [ 0.000000] NX (Execute Disable) protection: active dsm | [ 0.000000] extended physical RAM map: dsm | [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable dsm | [ 0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved dsm | [ 0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved dsm | [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000001df1cb7] usable dsm | [ 0.000000] reserve setup_data: [mem 0x0000000001df1cb8-0x0000000001df1cc7] usable dsm | [ 0.000000] reserve setup_data: [mem 0x0000000001df1cc8-0x000000003ffd6fff] usable dsm | [ 0.000000] reserve setup_data: [mem 0x000000003ffd7000-0x000000003fffffff] reserved dsm | [ 0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved dsm | [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved dsm | [ 0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved dsm | [ 0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved dsm | [ 0.000000] SMBIOS 2.8 present. dsm | [ 0.000000] Hypervisor detected: KVM dsm | [ 0.000000] Kernel/User page tables isolation: disabled dsm | [ 0.000000] e820: last_pfn = 0x3ffd7 max_arch_pfn = 0x400000000 dsm | [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC dsm | [ 0.000000] found SMP MP-table at [mem 0x000f5450-0x000f545f] mapped at [ffff8800000f5450] dsm | [ 0.000000] Using GB pages for direct mapping dsm | [ 0.000000] RAMDISK: [mem 0x3faa2000-0x3ffc6fff] dsm | [ 0.000000] ACPI: Early table checksum verification disabled dsm | [ 0.000000] ACPI: RSDP 0x00000000000F5290 000014 (v00 BOCHS ) dsm | [ 0.000000] ACPI: RSDT 0x000000003FFE224E 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001) dsm | [ 0.000000] ACPI: FACP 0x000000003FFE207E 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) dsm | [ 0.000000] ACPI: DSDT 0x000000003FFE0040 00203E (v01 BOCHS BXPC 00000001 BXPC 00000001) dsm | [ 0.000000] ACPI: FACS 0x000000003FFE0000 000040 dsm | [ 0.000000] ACPI: APIC 0x000000003FFE2172 000078 (v03 BOCHS BXPC 00000001 BXPC 00000001) dsm | [ 0.000000] ACPI: MCFG 0x000000003FFE21EA 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) dsm | [ 0.000000] ACPI: WAET 0x000000003FFE2226 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) dsm | [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 dsm | [ 0.000000] kvm-clock: cpu 0, msr 0:3ffd5001, primary cpu clock dsm | [ 0.000000] kvm-clock: using sched offset of 3592942335 cycles dsm | [ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns dsm | [ 0.000000] Zone ranges: dsm | [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] dsm | [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000003ffd6fff] dsm | [ 0.000000] Normal empty dsm | [ 0.000000] Movable zone start for each node dsm | [ 0.000000] Early memory node ranges dsm | [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] dsm | [ 0.000000] node 0: [mem 0x0000000000100000-0x000000003ffd6fff] dsm | [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffd6fff] dsm | [ 0.000000] ACPI: PM-Timer IO Port: 0x608 dsm | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) dsm | [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 dsm | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) dsm | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) dsm | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) dsm | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) dsm | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) dsm | [ 0.000000] Using ACPI (MADT) for SMP configuration information dsm | [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs dsm | [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] dsm | [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] dsm | [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] dsm | [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] dsm | [ 0.000000] PM: Registered nosave memory: [mem 0x01df1000-0x01df1fff] dsm | [ 0.000000] PM: Registered nosave memory: [mem 0x01df1000-0x01df1fff] dsm | [ 0.000000] e820: [mem 0x40000000-0xafffffff] available for PCI devices dsm | [ 0.000000] Booting paravirtualized kernel on KVM dsm | [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns dsm | [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:1 nr_node_ids:1 dsm | [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88003f800000 s95448 r8192 d31528 u2097152 dsm | [ 0.000000] KVM setup async PF for cpu 0 dsm | [ 0.000000] kvm-stealtime: cpu 0, msr 3f80f180 dsm | [ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes) dsm | [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257887 dsm | [ 0.000000] Kernel command line: root=/dev/sda1 ihd_num=0 netif_num=0 syno_hw_version=VirtualDSM vender_format_version=2 macs=0064a82cc643,0064a82cc644,0064a82cc645,0064a82cc646 dsm | [ 0.000000] Internal HD num: 0 dsm | [ 0.000000] Internal netif num: 0 dsm | [ 0.000000] Synology Hardware Version: VirtualDSM dsm | [ 0.000000] Vender format version: 2 dsm | [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) dsm | [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) dsm | [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) dsm | [ 0.000000] Memory: 1012832K/1048020K available (5354K kernel code, 868K rwdata, 1672K rodata, 1004K init, 1556K bss, 35188K reserved, 0K cma-reserved) dsm | [ 0.000000] Hierarchical RCU implementation. dsm | [ 0.000000] Build-time adjustment of leaf fanout to 64. dsm | [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=1. dsm | [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1 dsm | [ 0.000000] NR_IRQS:8448 nr_irqs:256 16 dsm | [ 0.000000] Console: colour dummy device 80x25 dsm | [ 0.000000] console [ttyS0] enabled dsm | [ 0.000000] tsc: Detected 2893.298 MHz processor dsm | [ 0.180243] Calibrating delay loop (skipped) preset value.. 5786.59 BogoMIPS (lpj=2893298) dsm | [ 0.182373] pid_max: default: 32768 minimum: 301 dsm | [ 0.183554] ACPI: Core revision 20150930 dsm | [ 0.185128] ACPI: 1 ACPI AML tables successfully acquired and loaded dsm | [ 0.186761] Security Framework initialized dsm | [ 0.187783] AppArmor: AppArmor initialized dsm | [ 0.188798] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) dsm | [ 0.190406] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) dsm | [ 0.192327] Initializing cgroup subsys io dsm | [ 0.193344] Initializing cgroup subsys memory dsm | [ 0.194496] Initializing cgroup subsys devices dsm | [ 0.196084] Initializing cgroup subsys freezer dsm | [ 0.197238] CPU: Physical Processor ID: 0 dsm | [ 0.205006] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 dsm | [ 0.206308] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 dsm | [ 0.207694] Speculative Store Bypass: Vulnerable dsm | [ 0.223980] Freeing SMP alternatives memory: 24K dsm | [ 0.230486] x2apic enabled dsm | [ 0.231488] Switched APIC routing to physical x2apic. dsm | [ 0.233954] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 dsm | [ 0.235449] smpboot: CPU0: Intel(R) Core(TM) i3-4130T CPU @ 2.90GHz (family: 0x6, model: 0x3c, stepping: 0x3) dsm | [ 0.237946] Performance Events: 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. dsm | [ 0.245626] ... version: 2 dsm | [ 0.246605] ... bit width: 48 dsm | [ 0.247596] ... generic registers: 4 dsm | [ 0.248556] ... value mask: 0000ffffffffffff dsm | [ 0.249838] ... max period: 00007fffffffffff dsm | [ 0.251072] ... fixed-purpose events: 3 dsm | [ 0.252037] ... event mask: 000000070000000f dsm | [ 0.253291] KVM setup paravirtual spinlock dsm | [ 0.254481] x86: Booted up 1 node, 1 CPUs dsm | [ 0.255519] smpboot: Total of 1 processors activated (5786.59 BogoMIPS) dsm | [ 0.257481] devtmpfs: initialized dsm | [ 0.258523] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns dsm | [ 0.260908] futex hash table entries: 256 (order: 2, 16384 bytes) dsm | [ 0.262634] NET: Registered protocol family 16 dsm | [ 0.263889] cpuidle: using governor ladder dsm | [ 0.264907] cpuidle: using governor menu dsm | [ 0.265918] ACPI: bus type PCI registered dsm | [ 0.267025] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 dsm | [ 0.268710] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) dsm | [ 0.270931] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 dsm | [ 0.272649] PCI: Using configuration type 1 for base access dsm | [ 0.274391] perf_event_intel: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off dsm | [ 0.278454] ACPI: Added _OSI(Module Device) dsm | [ 0.279587] ACPI: Added _OSI(Processor Device) dsm | [ 0.280665] ACPI: Added _OSI(3.0 _SCP Extensions) dsm | [ 0.281809] ACPI: Added _OSI(Processor Aggregator Device) dsm | [ 0.285444] ACPI: Interpreter enabled dsm | [ 0.286487] ACPI: (supports S0 S4 S5) dsm | [ 0.287376] ACPI: Using IOAPIC for interrupt routing dsm | [ 0.288582] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug dsm | [ 0.292164] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) dsm | [ 0.293658] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] dsm | [ 0.295821] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug] dsm | [ 0.297578] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] dsm | [ 0.299407] PCI host bridge to bus 0000:00 dsm | [ 0.300460] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] dsm | [ 0.302134] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] dsm | [ 0.303856] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] dsm | [ 0.305667] pci_bus 0000:00: root bus resource [mem 0x40000000-0xafffffff window] dsm | [ 0.307429] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] dsm | [ 0.309220] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] dsm | [ 0.311035] pci_bus 0000:00: root bus resource [bus 00-ff] dsm | [ 0.366399] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO dsm | [ 0.376244] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) dsm | [ 0.377817] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) dsm | [ 0.379341] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) dsm | [ 0.380853] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) dsm | [ 0.382385] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *10 11) dsm | [ 0.383933] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *10 11) dsm | [ 0.385631] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 *11) dsm | [ 0.387210] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 *11) dsm | [ 0.388685] ACPI: PCI Interrupt Link [GSIA] (IRQs *16) dsm | [ 0.390034] ACPI: PCI Interrupt Link [GSIB] (IRQs *17) dsm | [ 0.391303] ACPI: PCI Interrupt Link [GSIC] (IRQs *18) dsm | [ 0.392603] ACPI: PCI Interrupt Link [GSID] (IRQs *19) dsm | [ 0.393931] ACPI: PCI Interrupt Link [GSIE] (IRQs *20) dsm | [ 0.395235] ACPI: PCI Interrupt Link [GSIF] (IRQs *21) dsm | [ 0.396534] ACPI: PCI Interrupt Link [GSIG] (IRQs *22) dsm | [ 0.397829] ACPI: PCI Interrupt Link [GSIH] (IRQs *23) dsm | [ 0.399248] ACPI: Enabled 2 GPEs in block 00 to 3F dsm | [ 0.401170] vgaarb: loaded dsm | [ 0.401921] SCSI subsystem initialized dsm | [ 0.402938] pps_core: LinuxPPS API ver. 1 registered dsm | [ 0.404091] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> dsm | [ 0.406145] PTP clock support registered dsm | [ 0.407491] PCI: Using ACPI for IRQ routing dsm | [ 0.471327] clocksource: Switched to clocksource kvm-clock dsm | [ 0.478200] AppArmor: AppArmor Filesystem Enabled dsm | [ 0.479404] pnp: PnP ACPI init dsm | [ 0.480329] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved dsm | [ 0.482210] pnp: PnP ACPI: found 5 devices dsm | [ 0.489201] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns dsm | [ 0.491344] NET: Registered protocol family 2 dsm | [ 0.492526] TCP established hash table entries: 8192 (order: 4, 65536 bytes) dsm | [ 0.494210] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) dsm | [ 0.495758] TCP: Hash tables configured (established 8192 bind 8192) dsm | [ 0.497291] UDP hash table entries: 512 (order: 2, 16384 bytes) dsm | [ 0.498715] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) dsm | [ 0.500272] NET: Registered protocol family 1 dsm | [ 0.596287] Trying to unpack rootfs image as initramfs... dsm | [ 1.419053] decompress cpio completed and skip redundant lzma dsm | [ 1.421031] Freeing initrd memory: 5268K dsm | [ 1.422088] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 10737418240 ms ovfl timer dsm | [ 1.424164] hw unit of domain pp0-core 2^-0 Joules dsm | [ 1.425284] hw unit of domain package 2^-0 Joules dsm | [ 1.426404] hw unit of domain dram 2^-0 Joules dsm | [ 1.427460] hw unit of domain pp1-gpu 2^-0 Joules dsm | [ 1.430469] audit: initializing netlink subsys (disabled) dsm | [ 1.431815] audit: type=2000 audit(1743087074.691:1): initialized dsm | [ 1.433410] Initialise system trusted keyring dsm | [ 1.471885] VFS: Disk quotas dquot_6.6.0 dsm | [ 1.472871] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) dsm | [ 1.474689] Key type asymmetric registered dsm | [ 1.475696] Asymmetric key parser 'x509' registered dsm | [ 1.476829] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) dsm | [ 1.478527] io scheduler noop registered (default) dsm | [ 1.479731] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 dsm | [ 1.481026] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 dsm | [ 2.341841] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled dsm | [ 2.367713] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A dsm | [ 2.430322] tsc: Refined TSC clocksource calibration: 2893.294 MHz dsm | [ 2.431780] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b483f0c36, max_idle_ns: 440795226749 ns dsm | [ 2.575361] brd: module loaded dsm | [ 2.576296] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized dsm | [ 2.577753] Loading iSCSI transport class v2.0-870. dsm | [ 2.610178] rdac: device handler registered dsm | [ 2.639303] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16 dsm | [ 2.641326] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode dsm | [ 2.643270] ahci 0000:00:1f.2: flags: 64bit ncq only dsm | [ 2.777348] scsi host0: ahci dsm | [ 2.779063] scsi host1: ahci dsm | [ 2.781526] scsi host2: ahci dsm | [ 2.787655] scsi host3: ahci dsm | [ 2.792353] scsi host4: ahci dsm | [ 2.796947] scsi host5: ahci dsm | [ 2.797798] ata1: SATA max UDMA/133 abar m4096@0xfebff000 port 0xfebff100 irq 24 dsm | [ 2.799522] ata2: SATA max UDMA/133 abar m4096@0xfebff000 port 0xfebff180 irq 24 dsm | [ 2.801235] ata3: SATA max UDMA/133 abar m4096@0xfebff000 port 0xfebff200 irq 24 dsm | [ 2.802957] ata4: SATA max UDMA/133 abar m4096@0xfebff000 port 0xfebff280 irq 24 dsm | [ 2.804607] ata5: SATA max UDMA/133 abar m4096@0xfebff000 port 0xfebff300 irq 24 dsm | [ 2.806349] ata6: SATA max UDMA/133 abar m4096@0xfebff000 port 0xfebff380 irq 24 dsm | [ 2.808221] rtc_cmos 00:03: RTC can wake from S4 dsm | [ 2.832049] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 dsm | [ 2.833665] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram dsm | [ 2.835218] i2c /dev entries driver dsm | [ 2.836161] md: raid1 personality registered for level 1 dsm | [ 2.837545] NET: Registered protocol family 17 dsm | [ 2.838622] Key type dns_resolver registered dsm | [ 2.851373] mce: Using 10 MCE banks dsm | [ 2.852476] registered taskstats version 1 dsm | [ 2.853495] Loading compiled-in untrusted X.509 certificates dsm | [ 2.854787] Loading compiled-in X.509 certificates dsm | [ 2.855951] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329' dsm | [ 2.868591] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089' dsm | [ 2.871017] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28' dsm | [ 2.873616] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5' dsm | [ 2.875897] page_owner is disabled dsm | [ 2.876677] AppArmor: AppArmor sha1 policy hashing enabled dsm | [ 2.878661] rtc_cmos 00:03: setting system clock to 2025-03-27 14:51:15 UTC (1743087075) dsm | [ 3.114407] ata1: SATA link down (SStatus 0 SControl 300) dsm | [ 3.115875] ata2: SATA link down (SStatus 0 SControl 300) dsm | [ 3.117374] ata3: SATA link down (SStatus 0 SControl 300) dsm | [ 3.119374] ata4: SATA link down (SStatus 0 SControl 300) dsm | [ 3.121374] ata5: SATA link down (SStatus 0 SControl 300) dsm | [ 3.122859] ata6: SATA link down (SStatus 0 SControl 300) dsm | [ 3.125216] Freeing unused kernel memory: 1004K dsm | [ 3.126354] Write protecting the kernel read-only data: 8192k dsm | [ 3.127948] Freeing unused kernel memory: 780K dsm | [ 3.129713] Freeing unused kernel memory: 376K dsm | START /linuxrc.syno dsm | START /linuxrc.syno.impl dsm | Insert basic USB modules... dsm | :: Loading module usb-common ... [ OK ] dsm | :: Loading module usbcore[ 3.188810] ACPI: bus type USB registered dsm | [ 3.189875] usbcore: registered new interface driver usbfs dsm | [ 3.191198] usbcore: registered new interface driver hub dsm | [ 3.192536] usbcore: registered new interface driver ethub dsm | [ 3.193877] usbcore: registered new device driver usb dsm | ... [ OK ] dsm | :: Loading module ehci-hcd[ 3.217573] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver dsm | ... [ OK ] dsm | :: Loading module ehci-pci[ 3.228606] ehci-pci: EHCI PCI platform driver dsm | ... [ OK ] dsm | :: Loading module uhci-hcd[ 3.242270] uhci_hcd: USB Universal Host Controller Interface driver dsm | ... [ OK ] dsm | :: Loading module xhci-hcd ... [ OK ] dsm | Insert net driver(Mindspeed only)... dsm | [ 3.276124] kvmx64_synobios: loading out-of-tree module taints kernel. dsm | [ 3.277698] kvmx64_synobios: module license 'Synology Inc.' taints kernel. dsm | [ 3.279349] Disabling lock debugging due to kernel taint dsm | [ 3.283585] synobios ioctl TCGETS /dev/ttyS1 failed dsm | [ 3.284804] synobios unable to set termios of /dev/ttyS1 dsm | [ 3.286334] 2025-3-27 14:51:15 UTC dsm | [ 3.287144] synobios: load, major number 201 dsm | [ 3.288165] Brand: Synology dsm | [ 3.288844] Model: VirtualDSM dsm | [ 3.289577] set group disks wakeup number to 4, spinup time deno 7 dsm | [ 3.291058] synobios cpu_arch proc entry initialized dsm | [ 3.292268] synobios crypto_hw proc entry initialized dsm | [ 3.293461] synobios syno_platform proc entry initialized dsm | Starting /usr/syno/bin/synocfgen... dsm | /usr/syno/bin/synocfgen returns 0 dsm | [ 3.308196] Module [kvmx64_synobios] is removed. dsm | [ 3.309379] synobios: unload dsm | [ 3.317873] ACPI: PCI Interrupt Link [GSIF] enabled at IRQ 21 dsm | [ 3.320601] ACPI: PCI Interrupt Link [GSIH] enabled at IRQ 23 dsm | [ 3.323337] ACPI: PCI Interrupt Link [GSIE] enabled at IRQ 20 dsm | [ 3.325975] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22 dsm | [ 3.372828] scsi host6: Virtio SCSI HBA dsm | [ 3.376670] scsi 6:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 dsm | [ 3.381582] sd 6:0:0:0: [synoboot] 225280 512-byte logical blocks: (115 MB/110 MiB) dsm | [ 3.383954] sd 6:0:0:0: [synoboot] Write Protect is off dsm | [ 3.386091] sd 6:0:0:0: [synoboot] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA dsm | [ 3.399608] synoboot: synoboot1 synoboot2 dsm | [ 3.405839] sd 6:0:0:0: [synoboot] Attached SCSI disk dsm | [ 4.907235] scsi host7: Virtio SCSI HBA dsm | [ 4.909863] scsi 7:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 dsm | [ 4.913055] sd 7:0:0:0: [sda] 9676832 512-byte logical blocks: (4.95 GB/4.61 GiB) dsm | [ 4.915064] sd 7:0:0:0: [sda] Write Protect is off dsm | [ 4.917138] sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA dsm | [ 4.932521] sda: sda1 sda2 dsm | [ 4.937543] sd 7:0:0:0: [sda] Attached SCSI disk dsm | [ 6.443218] scsi host8: Virtio SCSI HBA dsm | [ 6.445839] scsi 8:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 dsm | [ 6.448956] sd 8:0:0:0: [sdb] 33554432 512-byte logical blocks: (17.2 GB/16.0 GiB) dsm | [ 6.451095] sd 8:0:0:0: [sdb] Write Protect is off dsm | [ 6.453104] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA dsm | [ 6.471804] sdb: sdb1 dsm | [ 6.478427] sd 8:0:0:0: [sdb] Attached SCSI disk dsm | [ 7.994662] random: nonblocking pool is initialized dsm | Partition Version=8 dsm | /sbin/e2fsck exists, checking /dev/sda1... dsm | e2fsck 1.44.1 (24-Mar-2018) dsm | /dev/sda1 has unsupported feature(s): FEATURE_C12 dsm | e2fsck: Get a newer version of e2fsck! dsm | /sbin/e2fsck -yvf r[ 8.043315] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities dsm | eturns 12 dsm | Mounting /dev/sda1 /tmpRoot dsm | [ 8.052937] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) dsm | ------------upgrade dsm | Begin upgrade procedure dsm | e2fsck 1.44.1 (24-Mar-2018) dsm | /sbin/e2fsck: No such file or directory while trying to open /dev/sda3 dsm | Mount data partition: /dev/sda3 -> /tmpData dsm | mount: mounting /dev/sda3 on /tmpData failed: No such file or directory dsm | Mount data partition failed dsm | ============upgrade dsm | ------------bootup-smallupdate dsm | mount: mounting /dev/sda3 on /tmpRoot/datamnt failed: No such file or directory dsm | Try bootup smallupdate dsm | UPGRADE_BOOTUP_SMALLUPDATE dsm | No patch exist. Skip Packed Bootup SmallUpdate dsm | Sparse files don't exist. Skip Sparse Bootup SmallUpdate dsm | Finished synoupgrade --bootup-smallupdate dsm | umount: can't unmount /tmpRoot/datamnt: Invalid argument dsm | ============bootup-smallupdate dsm | Root check fail, then do selfcheck dsm | Copyright (c) 2003-2021 Synology Inc. All rights reserved. dsm | dsm | Check Success dsm | Selfcheck pass, enter DSM. dsm | Wait 2 seconds for synology manufactory device dsm | Thu Mar 27 14:51:33 UTC 2025 dsm | /dev/sda1 /tmpRoot ext4 rw,relatime,data=ordered 0 0 dsm | none /sys/kernel/debug debugfs rw,relatime 0 0 dsm | root: Start backing up logs in junior mode dsm | [ 21.732516] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities dsm | [ 21.737709] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) dsm | umount: /etc/mtab: No such file or directory linuxrc.syno executed successfully. dsm | Post init dsm | [ 21.797584] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities dsm | [ 21.802513] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: barrier=1 dsm | [ 21.906229] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) dsm | [ 21.910551] systemd[1]: Detected virtualization kvm. dsm | [ 21.911776] systemd[1]: Detected architecture x86-64. dsm | dsm | Welcome to Linux! dsm | dsm | [ 21.915647] systemd[1]: Set hostname to <M73>. dsm | [ 22.204366] systemd[1]: Cannot add dependency job for unit synoperfeventd.service, ignoring: Unit synoperfeventd.service is masked. dsm | [ 22.207449] systemd[1]: Cannot add dependency job for unit SynoLedBrightness.service, ignoring: Unit SynoLedBrightness.service is masked. dsm | [ 22.210386] systemd[1]: Cannot add dependency job for unit pkg-install-low-priority-builtin.service, ignoring: Unit pkg-install-low-priority-builtin.service failed to load: No such file or directory. dsm | [ 22.214455] systemd[1]: Cannot add dependency job for unit pkg-install-high-priority-builtin.service, ignoring: Unit pkg-install-high-priority-builtin.service failed to load: No such file or directory. dsm | [ OK ] Created slice Root Slice. dsm | [ 22.221027] systemd[1]: Created slice Root Slice. dsm | [ 22.222182] systemd[1]: Starting Root Slice. dsm | [ OK ] Created slice SNMP. dsm | [ 22.224492] systemd[1]: Created slice SNMP. dsm | [ 22.225531] systemd[1]: Starting SNMP. dsm | [ OK ] Created slice Synology DSM Storage Service. dsm | [ 22.228044] systemd[1]: Created slice Synology DSM Storage Service. dsm | [ 22.229547] systemd[1]: Starting Synology DSM Storage Service. dsm | [ OK ] Created slice Synology DSM desktop service. dsm | [ 22.232621] systemd[1]: Created slice Synology DSM desktop service. dsm | [ 22.234142] systemd[1]: Starting Synology DSM desktop service. dsm | [ OK ] Created slice Synology Cache Advisor. dsm | [ 22.237050] systemd[1]: Created slice Synology Cache Advisor. dsm | [ 22.238467] systemd[1]: Starting Synology Cache Advisor. dsm | [ OK ] Listening on Journal Audit Socket. dsm | [ 22.241290] systemd[1]: Listening on Journal Audit Socket. dsm | [ 22.242635] systemd[1]: Starting Journal Audit Socket. dsm | [ OK ] Created slice RAID Resync Process. ...ing Resync, Repair and Reshape.. dsm | [ 22.246020] systemd[1]: Created slice RAID Resync Process. Including Resync, Repair and Reshape.. dsm | [ 22.248148] systemd[1]: Starting RAID Resync Process. Including Resync, Repair and Reshape.. dsm | [ OK ] Listening on udev Kernel Socket. dsm | [ 22.251581] systemd[1]: Listening on udev Kernel Socket. dsm | [ 22.252908] systemd[1]: Starting udev Kernel Socket. dsm | [ OK ] Reached target Paths. dsm | [ 22.255385] systemd[1]: Reached target Paths. dsm | [ 22.256506] systemd[1]: Starting Paths. dsm | [ OK ] Reached target Swap. dsm | [ 22.258617] systemd[1]: Reached target Swap. dsm | [ 22.259667] systemd[1]: Starting Swap. dsm | [ OK ] Created slice scemd. dsm | [ 22.261848] systemd[1]: Created slice scemd. dsm | [ 22.262899] systemd[1]: Starting scemd. dsm | [ INFO ] dev-hvc0.device is not active. dsm | [DEPEND] Dependency failed for agetty for console output(for vDSM). dsm | [ 22.267104] systemd[1]: Dependency failed for agetty for console output(for vDSM). dsm | [ 22.268944] systemd[1]: Job vdsm_dummy_tty.service/start failed with result 'dependency'. dsm | [ OK ] Created slice System Slice. dsm | [ 22.272298] systemd[1]: Created slice System Slice. dsm | [ 22.273514] systemd[1]: Starting System Slice. dsm | [ OK ] Created slice User and Session Slice. dsm | [ 22.276258] systemd[1]: Created slice User and Session Slice. dsm | [ 22.277697] systemd[1]: Starting User and Session Slice. dsm | [ OK ] Created slice OAuthService's slice. dsm | [ 22.280587] systemd[1]: Created slice OAuthService's slice. dsm | [ 22.281990] systemd[1]: Starting OAuthService's slice. dsm | [ OK ] Listening on Journal Socket. dsm | [ 22.284638] systemd[1]: Listening on Journal Socket. dsm | [ 22.285917] systemd[1]: Starting Journal Socket. dsm | [ 22.287526] systemd[1]: Starting Set boot sequence config... dsm | Starting Set boot sequence config... dsm | [ 22.290490] systemd[1]: Starting Load ntb_brd module... dsm | Starting Load ntb_brd module... dsm | [ 22.294730] systemd[1]: Starting check integrity of rd.gz decompression... dsm | Starting check integrity of rd.gz decompression... dsm | [ 22.301677] systemd[1]: Starting Journal Socket (/dev/log). dsm | [ 22.305738] systemd[1]: Starting Set time zone information to kernel... dsm | Starting Set time zone information to kernel... dsm | [ 22.315344] systemd[1]: Starting Synology Task Scheduler Init... dsm | Starting Synology Task Scheduler Init... dsm | [ OK ] Created slice Package Center Slice. dsm | [ 22.324506] systemd[1]: Created slice Package Center Slice. dsm | [ 22.326061] systemd[1]: Starting Package Center Slice. dsm | [ 22.329923] systemd[1]: Mounting Temporary Directory... dsm | Mounting Temporary Directory... dsm | [ 22.333113] systemd[1]: Starting unbind USB device... dsm | Starting unbind USB device... dsm | [ 22.337738] systemd[1]: Starting Link coredump path to volume if possible... dsm | Starting Link coredump path to volume if possible... dsm | [ OK ] Created slice FileStation's slice. dsm | [ 22.347618] systemd[1]: Created slice FileStation's slice. dsm | [ 22.349350] systemd[1]: Starting FileStation's slice. dsm | [ OK ] Created slice Shared Folder Sync. dsm | [ 22.352950] systemd[1]: Created slice Shared Folder Sync. dsm | [ 22.354441] systemd[1]: Starting Shared Folder Sync. dsm | [ OK ] Created slice Python2's slice. dsm | [ 22.357327] systemd[1]: Created slice Python2's slice. dsm | [ 22.358708] systemd[1]: Starting Python2's slice. dsm | [ OK ] Created slice system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice. dsm | [ 22.362171] systemd[1]: Created slice system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice. dsm | [ 22.364290] systemd[1]: Starting system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice. dsm | [ OK ] Created slice Task Scheduler Group. dsm | [ 22.367965] systemd[1]: Created slice Task Scheduler Group. dsm | [ 22.369446] systemd[1]: Starting Task Scheduler Group. dsm | [ OK ] Reached target Timers. dsm | [ 22.372158] systemd[1]: Reached target Timers. dsm | [ 22.373382] systemd[1]: Starting Timers. dsm | [ 22.375045] systemd[1]: Starting Set hostname... dsm | Starting Set hostname... dsm | [ 22.377873] systemd[1]: Starting Disabling fan checking flag ...... dsm | Starting Disabling fan checking flag ...... dsm | [ OK ] Created slice system-serial\x2dgetty.slice. dsm | [ 22.385481] systemd[1]: Created slice system-serial\x2dgetty.slice. dsm | [ 22.387704] systemd[1]: Starting system-serial\x2dgetty.slice. dsm | [ OK ] Created slice BTRFS Space Reclaim. dsm | [ 22.390901] systemd[1]: Created slice BTRFS Space Reclaim. dsm | [ 22.392358] systemd[1]: Starting BTRFS Space Reclaim. dsm | [ OK ] Created slice Synology Index slice (WAT). dsm | [ 22.395352] systemd[1]: Created slice Synology Index slice (WAT). dsm | [ 22.396945] systemd[1]: Starting Synology Index slice (WAT). dsm | [ OK ] Created slice VirtualDSM daemon slice. dsm | [ 22.400037] systemd[1]: Created slice VirtualDSM daemon slice. dsm | [ 22.401526] systemd[1]: Starting VirtualDSM daemon slice. dsm | [ OK ] Created slice SSDP service. dsm | [ 22.404415] systemd[1]: Created slice SSDP service. dsm | [ 22.405696] systemd[1]: Starting SSDP service. dsm | [ 22.407330] systemd[1]: Mounting Debug File System... dsm | Mounting Debug File System... dsm | [ 22.412617] systemd[1]: Starting Load Kernel Modules... dsm | Starting Load Kernel Modules... dsm | [ OK ] Created slice SMBService's slice. dsm | [ 22.418371] systemd[1]: Created slice SMBService's slice. dsm | [ 22.419937] systemd[1]: Starting SMBService's slice. dsm | [ OK ] Reached target Slices. dsm | [ 22.422982] systemd[1]: Reached target Slices. dsm | [ 22.424226] systemd[1]: Starting Slices. dsm | [ OK ] Created slice SynoFinder's slice. dsm | [ 22.427375] systemd[1]: Created slice SynoFinder's slice. dsm | [ 22.428780] systemd[1]: Starting SynoFinder's slice. dsm | [ OK ] Created slice ScsiTarget's slice. dsm | [ 22.431678] systemd[1]: Created slice ScsiTarget's slice. dsm | [ 22.433228] systemd[1]: Starting ScsiTarget's slice. dsm | [ OK ] Created slice Synology DSM internal service. dsm | [ 22.437164] systemd[1]: Created slice Synology DSM internal service. dsm | [ 22.438956] systemd[1]: Starting Synology DSM internal service. dsm | [ 22.441873] systemd[1]: Starting Synology swap... dsm | Starting Synology swap... dsm | [ OK ] Created slice Synology Swap Works. dsm | [ 22.448408] systemd[1]: Created slice Synology Swap Works. dsm | [ 22.451838] systemd[1]: Starting Synology Swap Works. dsm | [ OK ] Created slice Synology Flashcache. dsm | [ 22.456091] systemd[1]: Created slice Synology Flashcache. dsm | [ 22.460367] systemd[1]: Starting Synology Flashcache. dsm | [ OK ] Created slice dsm6-ui-compatible's slice. dsm | [ 22.465113] systemd[1]: Created slice dsm6-ui-compatible's slice. dsm | [ 22.469745] systemd[1]: Starting dsm6-ui-compatible's slice. dsm | [ OK ] Listening on udev Control Socket. dsm | [ 22.474192] systemd[1]: Listening on udev Control Socket. dsm | [ 22.475845] systemd[1]: Starting udev Control Socket. dsm | [ OK ] Created slice synobackup daemon slice. dsm | [ 22.481196] systemd[1]: Created slice synobackup daemon slice. dsm | [ 22.483465] systemd[1]: Starting synobackup daemon slice. dsm | [ OK ] Created slice BTRFS Optimization. dsm | [ 22.487752] systemd[1]: Created slice BTRFS Optimization. dsm | [ 22.489867] systemd[1]: Starting BTRFS Optimization. dsm | [ OK ] Created slice SecureSignIn's slice. dsm | [ 22.497591] systemd[1]: Created slice SecureSignIn's slice. dsm | [ 22.499039] systemd[1]: Starting SecureSignIn's slice. dsm | [ OK ] Mounted Debug File System. dsm | [ 22.502701] systemd[1]: Mounted Debug File System. dsm | [ OK ] Mounted Temporary Directory. dsm | [ 22.505700] systemd[1]: Mounted Temporary Directory. dsm | [ OK ] Started Set boot sequence config. dsm | [ 22.508627] systemd[1]: Started Set boot sequence config. dsm | [ OK ] Started Load ntb_brd module. dsm | [ 22.517857] NET: Registered protocol family 10 dsm | [ 22.520941] systemd[1]: Started Load ntb_brd module. dsm | [ OK ] Started check integrity of rd.gz decompression. dsm | [ 22.524931] systemd[1]: Started check integrity of rd.gz decompression. dsm | [ OK ] Listening on Journal Socket (/dev/log). dsm | [ 22.530104] sit: IPv6 over IPv4 tunneling driver dsm | [ 22.532936] systemd[1]: Listening on Journal Socket (/dev/log). dsm | [ OK ] Started Set time zone information to kernel. dsm | [ 22.541471] zram: Added device: zram0 dsm | [ 22.543768] systemd[1]: Started Set time zone information to kernel. dsm | [ 22.549124] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com dsm | [ OK ] Started Synology Task Scheduler Init. dsm | [ 22.555900] systemd[1]: Started Synology Task Scheduler Init. dsm | [ OK ] Started unbind USB device. dsm | [ 22.562948] systemd[1]: Started unbind USB device. dsm | [ 22.564946] sd 6:0:0:0: Attached scsi generic sg0 type 0 dsm | [ 22.567288] sd 7:0:0:0: Attached scsi generic sg1 type 0 dsm | [ OK ] Started Link coredump path to volume if possible. dsm | [ 22.570922] sd 8:0:0:0: Attached scsi generic sg2 type 0 dsm | [ 22.572569] systemd[1]: Started Link coredump path to volume if possible. dsm | [ OK ] Started Set hostname. dsm | [ 22.576808] systemd[1]: Started Set hostname. dsm | [ OK ] Started Disabling fan checking flag .... dsm | [ 22.582524] systemd[1]: Started Disabling fan checking flag .... dsm | [ OK ] Reached target Sockets. dsm | [ 22.586978] i40evf: Intel(R) 40-10 Gigabit Virtual Function Network Driver - version 3.6.15 dsm | [ 22.589035] Copyright(c) 2013 - 2018 Intel Corporation. dsm | [ 22.590395] systemd[1]: Reached target Sockets. dsm | [ 22.591599] systemd[1]: Starting Sockets. dsm | [ 22.594184] systemd[1]: Starting Journal Service... dsm | [ 22.596357] Adding 2097148k swap on /dev/sda2. Priority:-1 extents:1 across:2097148k SS dsm | [ 22.598814] zram0: detected capacity change from 0 to 627048448 dsm | [ 22.600542] igbvf: Intel(R) Gigabit Virtual Function Driver - 2.3.8.2 dsm | [ 22.602029] igbvf: Copyright (c) 1999-2015 Intel Corporation. dsm | Starting Journal Service... dsm | [ OK ] Reached target Local File Systems. dsm | [ 22.609059] systemd[1]: Reached target Local File Systems. dsm | [ 22.611807] ixgbevf: Intel(R) 10GbE PCI Express Virtual Function Driver - version 4.5.3 dsm | [ 22.613735] Copyright(c) 1999 - 2019 Intel Corporation. dsm | [ 22.615580] Adding 612348k swap on /dev/zram0. Priority:1 extents:1 across:612348k SS dsm | [ 22.618403] systemd[1]: Starting Local File Systems. dsm | [ 22.628220] systemd[1]: Starting D-Bus System Message Bus... dsm | Starting D-Bus System Message Bus... dsm | [ 22.633454] usbcore: registered new interface driver usb-storage dsm | [ 22.636461] systemd[1]: Starting udev Coldplug all Devices... dsm | Starting udev Coldplug all Devices... dsm | [ 22.641520] systemd[1]: Starting D-Bus Session Message Bus... dsm | Starting D-Bus Session Message Bus... dsm | [ 22.650378] systemd[1]: Starting Set boot sequence config for temporary use... dsm | Starting Set boot sequence config for temporary use... dsm | [ 22.658613] systemd[1]: Starting Mount usb fs... dsm | Starting Mount usb fs... dsm | [ OK ] Started Journal Service. dsm | [ 22.671295] systemd[1]: Started Journal Service. dsm | [ OK ] Started Load Kernel Modules. dsm | [ OK ] Started Synology swap. dsm | [ OK ] Started Set boot sequence config for temporary use. dsm | Starting Load Kernel Modules in Kernel Project... dsm | Starting Apply etc.defaults/sysctl.conf kernel variable.... dsm | Mounting Configuration File System... dsm | Starting Load Fan Modules in Kernel Project... dsm | [ 22.720122] usbcore: registered new interface driver usblp dsm | Starting Adjust NIC sequence... dsm | Starting System Logger Daemon... dsm | Starting Flush Journal to Persistent Storage... dsm | [ 22.744930] usbcore: registered new interface driver usbhid dsm | [ 22.746292] usbhid: USB HID core driver dsm | [ OK ] Mounted Configuration File System. dsm | [ OK ] Started D-Bus Session Message Bus. dsm | [ OK ] Started Apply etc.defaults/sysctl.conf kernel variable.. dsm | [ 22.775988] synobios ioctl TCGETS /dev/ttyS1 failed dsm | [ 22.777229] synobios unable to set termios of /dev/ttyS1 dsm | [ 22.778803] 2025-3-27 14:51:34 UTC dsm | [ 22.779639] synobios: load, major number 201 dsm | [ 22.780671] Brand: Synology dsm | [ 22.781366] Model: VirtualDSM dsm | [ 22.782079] set group disks wakeup number to 4, spinup time deno 7 dsm | [ 22.783520] synobios cpu_arch proc entry initialized dsm | [ 22.784702] synobios crypto_hw proc entry initialized dsm | [ 22.785917] synobios syno_platform proc entry initialized dsm | [ OK ] Started Load Fan Modules in Kernel Project. dsm | [FAILED] Failed to start Adjust NIC sequence. dsm | See "systemctl status SynoInitEth.service" for details. dsm | [ OK ] Started D-Bus System Message Bus. dsm | [ OK ] Started udev Coldplug all Devices. dsm | [ 22.816169] systemd-journald[5148]: Received request to flush runtime journal from PID 1 dsm | [ OK ] Started Flush Journal to Persistent Storage. dsm | Starting Create Volatile Files and Directories... dsm | [ OK ] Started D-Bus System Message Bus. dsm | Starting Apply etc/sysctl.conf kernel variable.... dsm | [FAILED] Failed to start Mount usb fs. dsm | See "systemctl status syno-mount-usbfs.service" for details. dsm | [ OK ] Started Apply etc/sysctl.conf kernel variable.. dsm | Starting Apply Kernel Variables... dsm | [ OK ] Started Create Volatile Files and Directories. dsm | Starting synodsmnotify... dsm | [ OK ] Reached target Create SDK locks directory. dsm | Starting Check /etc/synoinfo.conf... dsm | Starting Check Synology user info consistency... dsm | Starting Check Synology group info consistency... dsm | [ OK ] Started Apply Kernel Variables. dsm | [ OK ] Started synodsmnotify. dsm | Starting Apply kernel variable kernel.sem at least 1024... dsm | Starting Apply kernel variable vm.min-free-kbytes... dsm | [ 22.916653] AVX2 version of gcm_enc/dec engaged. dsm | [ 22.917882] AES CTR mode by8 optimization enabled dsm | Starting Apply kernel variable kernel-shmmni at least 16384... dsm | [ OK ] Started Check /etc/synoinfo.conf. dsm | [ OK ] Started Apply kernel variable kernel-shmmni at least 16384. dsm | [ OK ] Started Apply kernel variable kernel.sem at least 1024. dsm | [ OK ] Started Check Synology user info consistency. dsm | [ OK ] Started Apply kernel variable vm.min-free-kbytes. dsm | [ OK ] Started Load Kernel Modules in Kernel Project. dsm | Starting Software Init Led for support led v2 models... dsm | Starting DSM Release Rolling Group ID... dsm | [ OK ] Started Check Synology group info consistency. dsm | [ OK ] Started DSM Release Rolling Group ID. dsm | [ OK ] Started Software Init Led for support led v2 models. dsm | [ OK ] Reached target User and Group Name Lookups. dsm | Starting move domain or ldap user p...der to domain or ldap folder.... dsm | Starting Prepare notification cache data... dsm | [ OK ] Reached target Synology local user and group ready. dsm | [ OK ] Started move domain or ldap user pr...older to domain or ldap folder.. dsm | [ OK ] Started Prepare notification cache data. dsm | [ OK ] Started System Logger Daemon. dsm | Starting Synology Log bootup start... dsm | [DEPEND] Dependency failed for rebuild local user and group db. dsm | Starting synodrnode... dsm | [ OK ] Reached target Synology root filesystem (rw) ready. dsm | Starting DSM Installation ID... dsm | [ OK ] Reached target Network (Pre). dsm | Starting Set arp ignore... dsm | Starting Synology Network Daemon... dsm | Starting Umount initrd... dsm | Starting Clean UPS config... dsm | Starting Set Eunit Sequence... dsm | Starting syno-cgi-keygen.service... dsm | Starting Load AppArmor profiles... dsm | Starting Synology Default TLS Profile... dsm | Starting DSM Boot Health Check... dsm | Starting Synology check locale... dsm | [ OK ] Started Synology Log bootup start. dsm | [ OK ] Started synodrnode. dsm | [ OK ] Started DSM Installation ID. dsm | [ OK ] Started Set arp ignore. dsm | [ OK ] Started Synology Network Daemon. dsm | [ OK ] Started Umount initrd. dsm | [ OK ] Started Clean UPS config. dsm | [ OK ] Started Set Eunit Sequence. dsm | [ OK ] Started Synology Default TLS Profile. dsm | [ OK ] Started Synology check locale. dsm | Starting udev Kernel Device Manager... dsm | Starting Wait for Synology Network to be Configured... dsm | Starting rc.network... dsm | [ OK ] Started syno-cgi-keygen.service. dsm | [ OK ] Started DSM Boot Health Check. dsm | [ OK ] Started udev Kernel Device Manager. dsm | [ OK ] Started Load AppArmor profiles. dsm | [ OK ] Reached target System Initialization. dsm | [ OK ] Started Serial Getty on ttyS0. dsm | Starting Serial Getty on ttyS0... dsm | [ OK ] Reached target Login Prompts. dsm | [ OK ] Started Synology token manager. dsm | Starting Synology token manager... dsm | [ OK ] Started Synology task manager. dsm | Starting Synology task manager... dsm | Starting bootup upgrade sha package... dsm | [ OK ] Started bootup upgrade sha package. dsm | [ OK ] Found device /dev/synoboot2. dsm | [ OK ] Reached target Synology synoboot2 done. dsm | [ OK ] Reached target Basic System. dsm | Starting Prepare SSDP configs... dsm | Starting Prepare snmp configs... dsm | [ OK ] Started synobackup daemon. dsm | Starting synobackup daemon... dsm | Starting synoindex check if there a...ny synoindex-related packages... dsm | Starting Samba Environment Setup Unit... dsm | Starting Control RC power... dsm | Starting Synology filesytem check on bootup... dsm | Starting always preprocess jobs before any package is started... dsm | Starting WD idle3 timer... dsm | Starting Synology Event Task Scheduler Init... dsm | Starting System Profile Tuning... dsm | [ 24.432227] exdisplay_handler not implemented dsm | Starting Log Rotate Daemon... dsm | Starting Synology Schedule Daemon... dsm | Starting Synology guest service daemon... dsm | Starting synoconfd daemon... dsm | [ OK ] Started Synology log accounting service. dsm | Starting Synology log accounting service... dsm | Starting Service for irq balance... dsm | Starting Login Service... dsm | Starting Synology guest command handle daemon... dsm | Starting Hibernation debug check... dsm | Starting Synology log notification service... dsm | Starting Synology firmware DLMC... dsm | [ OK ] Started Prepare SSDP configs. dsm | [ OK ] Started Prepare snmp configs. dsm | [FAILED] Failed to start synoindex check if ... any synoindex-related packages. dsm | See "systemctl status synoindex-checkpackage.service" for details. dsm | [DEPEND] Dependency failed for synoindex notifyd. dsm | [DEPEND] Dependency failed for synomkthumbd. dsm | [DEPEND] Dependency failed for synoindexd. dsm | [DEPEND] Dependency failed for synoindex mediad. dsm | [DEPEND] Dependency failed for synomkflvd. dsm | [DEPEND] Dependency failed for synoindex scand. dsm | [DEPEND] Dependency failed for synoindex plugind. dsm | [DEPEND] Dependency failed for synoindex workerd. dsm | [ OK ] Started Control RC power. dsm | [ OK ] Started Synology filesytem check on bootup. dsm | [ OK ] Started WD idle3 timer. dsm | [ OK ] Started Synology Event Task Scheduler Init. dsm | [ OK ] Started System Profile Tuning. dsm | [ OK ] Started Log Rotate Daemon. dsm | [ OK ] Started Synology Schedule Daemon. dsm | [ OK ] Started Synology guest service daemon. dsm | [ OK ] Started synoconfd daemon. dsm | [ OK ] Started Service for irq balance. dsm | [ OK ] Started Synology guest command handle daemon. dsm | [ OK ] Started Hibernation debug check. dsm | [ OK ] Started Synology firmware DLMC. dsm | [ OK ] Started Login Service. dsm | Starting Synology guest communication daemon... dsm | Starting Synology space service... dsm | [ OK ] Started Synology guest communication daemon. dsm | [ OK ] Stopped Synology Task Scheduler Vmtouch. dsm | [ OK ] Started Synology Task Scheduler Vmtouch. dsm | Starting Synology Task Scheduler Vmtouch... dsm | [ OK ] Started Samba Environment Setup Unit. dsm | [ OK ] Started always preprocess jobs before any package is started. dsm | [ OK ] Reached target Hook on root ready. dsm | Starting SMBService's service unit... dsm | Starting SecureSignIn's service unit... dsm | Starting Python2's service unit... dsm | [ OK ] Started Synology space service. dsm | Starting Synology virtual space service... dsm | [ OK ] Started Python2's service unit. dsm | [ OK ] Started Synology virtual space service. dsm | [ OK ] Reached target Synology storage pool. dsm | Starting Synology Building Tasks Restore for Storage Manager... dsm | Starting Synology filesystem check service... dsm | [ OK ] Started Synology filesystem check service. dsm | Starting Synology volume service... dsm | [ OK ] Started Synology log notification service. dsm | Stopping Synology Task Scheduler Vmtouch... dsm | [ OK ] Stopped Synology Task Scheduler Vmtouch. dsm | [ OK ] Started Synology Task Scheduler Vmtouch. dsm | Starting Synology Task Scheduler Vmtouch... dsm | [ 26.015262] raid6: sse2x1 gen() 10136 MB/s dsm | [ 26.033278] raid6: sse2x1 xor() 6060 MB/s dsm | [ 26.051274] raid6: sse2x2 gen() 10386 MB/s dsm | [ 26.069265] raid6: sse2x2 xor() 7433 MB/s dsm | [ 26.087261] raid6: sse2x4 gen() 14250 MB/s dsm | [ 26.105263] raid6: sse2x4 xor() 8978 MB/s dsm | [ 26.123263] raid6: avx2x1 gen() 19796 MB/s dsm | [ 26.141260] raid6: avx2x1 xor() 13472 MB/s dsm | [ 26.159262] raid6: avx2x2 gen() 22882 MB/s dsm | [ 26.177260] raid6: avx2x2 xor() 14082 MB/s dsm | [ 26.195260] raid6: avx2x4 gen() 26203 MB/s dsm | [ 26.213260] raid6: avx2x4 xor() 16892 MB/s dsm | [ 26.214309] raid6: using algorithm avx2x4 gen() 26203 MB/s dsm | [ 26.215637] raid6: .... xor() 16892 MB/s, rmw enabled dsm | [ 26.216855] raid6: using avx2x2 recovery algorithm dsm | [ OK ] Started SMBService's service unit. dsm | [ OK ] Created slice system-dhclient.slice. dsm | Starting DHCP client init... dsm | [ OK ] Started DHCP client init. dsm | Starting eth0 DHCP Client... dsm | [ OK ] Started eth0 DHCP Client. dsm | [ OK ] Started SecureSignIn's service unit. dsm | [ OK ] Started rc.network. dsm | Starting Set Multiple Geteway... dsm | Starting PPPoE... dsm | Starting Check if network is ready... dsm | [ OK ] Started PPPoE. dsm | [ OK ] Started Set Multiple Geteway. dsm | [ OK ] Reached target Network. dsm | Starting findhost daemon... dsm | Starting Network Time Service... dsm | [ OK ] Started Synology SCGI. dsm | Starting Synology SCGI... dsm | Starting Synology SCGI SocketIO... dsm | [ OK ] Started findhost daemon. dsm | [ 26.539594] xor: automatically using best checksumming function: dsm | [ 26.550261] avx : 29152.000 MB/sec dsm | [ OK ] Started Network Time Service. dsm | [ 26.604909] Btrfs loaded, crc32c=crc32c-intel dsm | [ 26.606960] BTRFS: device label 2025.03.27-14:19:45 v69057 devid 1 transid 266 /dev/sdb1 dsm | [ 26.611309] BTRFS info (device sdb1): enabling auto syno reclaim space dsm | [ 26.612939] BTRFS info (device sdb1): use ssd allocation scheme dsm | [ 26.614369] BTRFS info (device sdb1): turning on discard dsm | [ 26.615627] BTRFS info (device sdb1): using free space tree dsm | [ 26.616987] BTRFS info (device sdb1): using free block group cache tree dsm | [ 26.618569] BTRFS info (device sdb1): has skinny extents dsm | [ OK ] Started Synology Building Tasks Restore for Storage Manager. dsm | Stopping Synology Task Scheduler Vmtouch... dsm | [ OK ] Stopped Synology Task Scheduler Vmtouch. dsm | [ OK ] Started Synology Task Scheduler Vmtouch. dsm | Starting Synology Task Scheduler Vmtouch... dsm | [ OK ] Started Synology volume service. dsm | Starting Synology volume mount post hook... dsm | [ OK ] Started Synology volume mount post hook. dsm | [ OK ] Reached target Synology data volumes. dsm | Starting daemon for monitor logs and generate alert... dsm | Starting Synology Cron Daemon... dsm | Starting Prepare var service tmp... dsm | Starting Synology Database Update... dsm | Starting Check Synology shared folders... dsm | Starting Fix bind mount explosion problem... dsm | Starting Synology Cache Advisor Service... dsm | Starting Build-in PHP timezone updater... dsm | Starting Syno Data Protection - Btrfs Snapshot Meta Sync... dsm | Starting Syno Data Protection - Btrfs Deleted Subvolume Clean... dsm | Starting Load Bypass Traverse Checking... dsm | Starting daemon for monitor HW/system status... dsm | Starting Syno Data Protection - Btrfs Snapshot Count Sync... dsm | Starting Keep var services homes existing... dsm | Starting move user preference folder to volume.... dsm | Starting Syno Data Protection - Btrfs Snapshot Usage Task Clean... dsm | Starting Check Synology HotSpare Config... dsm | [ OK ] Started SNMP Daemon. dsm | Starting SNMP Daemon... dsm | Starting Daemon for Resource Monitor... dsm | Starting Syno Data Protection - Btrfs Snaptree reconstruct... dsm | [ OK ] Started daemon for monitor logs and generate alert. dsm | [ OK ] Started Synology Cron Daemon. dsm | [ OK ] Started Synology Database Update. dsm | [ OK ] Started Synology Cache Advisor Service. dsm | [ OK ] Started Build-in PHP timezone updater. dsm | [ OK ] Started Syno Data Protection - Btrfs Snapshot Meta Sync. dsm | [ OK ] Started Syno Data Protection - Btrfs Deleted Subvolume Clean. dsm | [ OK ] Started Check Synology shared folders. dsm | [ OK ] Started Load Bypass Traverse Checking. dsm | [ OK ] Started Syno Data Protection - Btrfs Snapshot Count Sync. dsm | [ OK ] Started Keep var services homes existing. dsm | [ OK ] Started Syno Data Protection - Btrfs Snapshot Usage Task Clean. dsm | [ OK ] Started Daemon for Resource Monitor. dsm | [ OK ] Started Syno Data Protection - Btrfs Snaptree reconstruct. dsm | [ OK ] Started Fix bind mount explosion problem. dsm | [ OK ] Started Wait for Synology Network to be Configured. dsm | Starting Synology Network Event Daemon... dsm | Starting Migrate all volume and share to quota DB... dsm | Starting Check share snapshot... dsm | [ OK ] Started Prepare var service tmp. dsm | [ OK ] Started move user preference folder to volume.. dsm | [ OK ] Started Check Synology HotSpare Config. dsm | [ OK ] Started Synology Network Event Daemon. dsm | [ OK ] Started Migrate all volume and share to quota DB. dsm | Starting Synology daemon for monitoring space/disk/cache status... dsm | Starting Nginx... dsm | [ OK ] Started Check share snapshot. dsm | [ OK ] Reached target Synology shared folders. dsm | Starting Remove session if the option enabled.... dsm | Starting synotifyd... dsm | Starting daemon for handle hotplug event... dsm | Starting Shared Folder Sync Daemon... dsm | Starting Build DB link for synolog... dsm | [ OK ] Started synotifyd. dsm | [ OK ] Started Remove session if the option enabled.. dsm | Starting Synology CGI Auth Daemon... dsm | [ OK ] Started Synology CGI Auth Daemon. dsm | [ OK ] Started Synology daemon for monitoring space/disk/cache status. dsm | Starting Sync data scrubbing config... dsm | [ OK ] Started Shared Folder Sync Daemon. dsm | [ 28.421656] Synotify use 16384 event queue size dsm | [ 28.439310] Synotify use 16384 event queue size dsm | [ OK ] Started daemon for handle hotplug event. dsm | [ OK ] Started Sync data scrubbing config. dsm | [ OK ] Started Build DB link for synolog. dsm | [ OK ] Started Check if network is ready. dsm | [ OK ] Reached target Network is Online. dsm | Starting Avahi daemon... dsm | Starting NetBIOS name server... dsm | Starting Set IP Conflict Detect... dsm | Starting Entry for WS-Transfer and WS-Discovery Server... dsm | Starting VPN Client... dsm | Starting deal with remote/ISO mount during when bootup and poweroff... dsm | Starting register ds region by ip... dsm | Starting broadcast synorelayd boot state... dsm | Starting Issue VDSM ready for intialization before boot-done.... dsm | [ 29.032510] capability: warning:nginx' uses 32-bit capabilities (legacy support in use) dsm | [ 29.319598] loop: module loaded dsm | dsm | M73 login: [ 30.825101] iSCSI:target_core_rodsp_server.c:1027:rodsp_server_init RODSP server started, login_key(02113245650f). dsm | [ 30.853897] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized dsm | [ 30.886311] iSCSI:target_core_device.c:613:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288 dsm | [ 30.889243] iSCSI:target_core_configfs.c:5446:target_init_dbroot db_root: cannot open: /etc/target dsm | [ 30.891490] iSCSI:target_core_lunbackup.c:361:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully dsm | [ 30.938678] iSCSI:target_core_file.c:149:fd_attach_hba RODSP plugin for fileio is enabled. dsm | [ 30.940743] iSCSI:target_core_file.c:156:fd_attach_hba ODX Token Manager is enabled. dsm | [ 30.954037] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled. dsm | [ 30.961285] iSCSI:target_core_ep.c:795:ep_attach_hba RODSP plugin for epio is enabled. dsm | [ 30.963252] iSCSI:target_core_ep.c:802:ep_attach_hba ODX Token Manager is enabled. dsm | [ 31.147131] workqueue: max_active 1024 requested for vhost_scsi is out of range, clamping between 1 and 512 dsm | [ 32.734798] 8021q: 802.1Q VLAN Support v1.8 dsm | [ 32.735864] 8021q: adding VLAN 0 to HW filter on device eth0 dsm | dsm | ❯ ----------------------------------------------------------- dsm | ❯ You can now login to DSM at port 5000 dsm | ❯ ----------------------------------------------------------- dsm | dsm | [ 34.298818] fuse init (API version 7.23)
nat': Table does not exist (do you need to insmod?) dsm | Perhaps iptables or your kernel needs to be upgraded. dsm | ❯ ERROR: The 'ip_tables' kernel module is not loaded. Try this command: sudo modprobe ip_tables iptable_nat dsm | ❯ Notice: port mapping will not work without "USER_PORTS" now. dsm | ❯ Warning: an error occured, falling back to user-mode networking! dsm | ❯ Booting Virtual DSM using QEMU v9.2.2... dsm | [ 0.000000] Initializing cgroup subsys cpuset dsm | [ 0.000000] Initializing cgroup subsys cpu dsm | [ 0.000000] Initializing cgroup subsys cpuacct dsm | [ 0.000000] Linux version 4.4.180+ (root@build3) (gcc version 7.5.0 (GCC) ) #42218 SMP Fri May 5 00:04:19 CST 2023 dsm | [ 0.000000] Command line: root=/dev/sda1 ihd_num=0 netif_num=0 syno_hw_version=VirtualDSM vender_format_version=2 macs=0064a82cc643,0064a82cc644,0064a82cc645,0064a82cc646 dsm | [ 0.000000] KERNEL supported cpus: dsm | [ 0.000000] Intel GenuineIntel dsm | [ 0.000000] AMD AuthenticAMD dsm | [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 dsm | [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' dsm | [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' dsm | [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' dsm | [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. dsm | [ 0.000000] e820: BIOS-provided physical RAM map: dsm | [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable dsm | [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved dsm | [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved dsm | [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffd6fff] usable dsm | [ 0.000000] BIOS-e820: [mem 0x000000003ffd7000-0x000000003fffffff] reserved dsm | [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved dsm | [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved dsm | [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved dsm | [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved dsm | [ 0.000000] NX (Execute Disable) protection: active dsm | [ 0.000000] extended physical RAM map: dsm | [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable dsm | [ 0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved dsm | [ 0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved dsm | [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000001df1cb7] usable dsm | [ 0.000000] reserve setup_data: [mem 0x0000000001df1cb8-0x0000000001df1cc7] usable dsm | [ 0.000000] reserve setup_data: [mem 0x0000000001df1cc8-0x000000003ffd6fff] usable dsm | [ 0.000000] reserve setup_data: [mem 0x000000003ffd7000-0x000000003fffffff] reserved dsm | [ 0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved dsm | [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved dsm | [ 0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved dsm | [ 0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved dsm | [ 0.000000] SMBIOS 2.8 present. dsm | [ 0.000000] Hypervisor detected: KVM dsm | [ 0.000000] Kernel/User page tables isolation: disabled dsm | [ 0.000000] e820: last_pfn = 0x3ffd7 max_arch_pfn = 0x400000000 dsm | [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC dsm | [ 0.000000] found SMP MP-table at [mem 0x000f5450-0x000f545f] mapped at [ffff8800000f5450] dsm | [ 0.000000] Using GB pages for direct mapping dsm | [ 0.000000] RAMDISK: [mem 0x3faa2000-0x3ffc6fff] dsm | [ 0.000000] ACPI: Early table checksum verification disabled dsm | [ 0.000000] ACPI: RSDP 0x00000000000F5290 000014 (v00 BOCHS ) dsm | [ 0.000000] ACPI: RSDT 0x000000003FFE224E 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001) dsm | [ 0.000000] ACPI: FACP 0x000000003FFE207E 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) dsm | [ 0.000000] ACPI: DSDT 0x000000003FFE0040 00203E (v01 BOCHS BXPC 00000001 BXPC 00000001) dsm | [ 0.000000] ACPI: FACS 0x000000003FFE0000 000040 dsm | [ 0.000000] ACPI: APIC 0x000000003FFE2172 000078 (v03 BOCHS BXPC 00000001 BXPC 00000001) dsm | [ 0.000000] ACPI: MCFG 0x000000003FFE21EA 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) dsm | [ 0.000000] ACPI: WAET 0x000000003FFE2226 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) dsm | [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 dsm | [ 0.000000] kvm-clock: cpu 0, msr 0:3ffd5001, primary cpu clock dsm | [ 0.000000] kvm-clock: using sched offset of 3592942335 cycles dsm | [ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns dsm | [ 0.000000] Zone ranges: dsm | [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] dsm | [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000003ffd6fff] dsm | [ 0.000000] Normal empty dsm | [ 0.000000] Movable zone start for each node dsm | [ 0.000000] Early memory node ranges dsm | [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] dsm | [ 0.000000] node 0: [mem 0x0000000000100000-0x000000003ffd6fff] dsm | [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffd6fff] dsm | [ 0.000000] ACPI: PM-Timer IO Port: 0x608 dsm | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) dsm | [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 dsm | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) dsm | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) dsm | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) dsm | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) dsm | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) dsm | [ 0.000000] Using ACPI (MADT) for SMP configuration information dsm | [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs dsm | [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] dsm | [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] dsm | [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] dsm | [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] dsm | [ 0.000000] PM: Registered nosave memory: [mem 0x01df1000-0x01df1fff] dsm | [ 0.000000] PM: Registered nosave memory: [mem 0x01df1000-0x01df1fff] dsm | [ 0.000000] e820: [mem 0x40000000-0xafffffff] available for PCI devices dsm | [ 0.000000] Booting paravirtualized kernel on KVM dsm | [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns dsm | [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:1 nr_node_ids:1 dsm | [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88003f800000 s95448 r8192 d31528 u2097152 dsm | [ 0.000000] KVM setup async PF for cpu 0 dsm | [ 0.000000] kvm-stealtime: cpu 0, msr 3f80f180 dsm | [ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes) dsm | [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257887 dsm | [ 0.000000] Kernel command line: root=/dev/sda1 ihd_num=0 netif_num=0 syno_hw_version=VirtualDSM vender_format_version=2 macs=0064a82cc643,0064a82cc644,0064a82cc645,0064a82cc646 dsm | [ 0.000000] Internal HD num: 0 dsm | [ 0.000000] Internal netif num: 0 dsm | [ 0.000000] Synology Hardware Version: VirtualDSM dsm | [ 0.000000] Vender format version: 2 dsm | [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) dsm | [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) dsm | [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) dsm | [ 0.000000] Memory: 1012832K/1048020K available (5354K kernel code, 868K rwdata, 1672K rodata, 1004K init, 1556K bss, 35188K reserved, 0K cma-reserved) dsm | [ 0.000000] Hierarchical RCU implementation. dsm | [ 0.000000] Build-time adjustment of leaf fanout to 64. dsm | [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=1. dsm | [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1 dsm | [ 0.000000] NR_IRQS:8448 nr_irqs:256 16 dsm | [ 0.000000] Console: colour dummy device 80x25 dsm | [ 0.000000] console [ttyS0] enabled dsm | [ 0.000000] tsc: Detected 2893.298 MHz processor dsm | [ 0.180243] Calibrating delay loop (skipped) preset value.. 5786.59 BogoMIPS (lpj=2893298) dsm | [ 0.182373] pid_max: default: 32768 minimum: 301 dsm | [ 0.183554] ACPI: Core revision 20150930 dsm | [ 0.185128] ACPI: 1 ACPI AML tables successfully acquired and loaded dsm | [ 0.186761] Security Framework initialized dsm | [ 0.187783] AppArmor: AppArmor initialized dsm | [ 0.188798] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) dsm | [ 0.190406] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) dsm | [ 0.192327] Initializing cgroup subsys io dsm | [ 0.193344] Initializing cgroup subsys memory dsm | [ 0.194496] Initializing cgroup subsys devices dsm | [ 0.196084] Initializing cgroup subsys freezer dsm | [ 0.197238] CPU: Physical Processor ID: 0 dsm | [ 0.205006] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 dsm | [ 0.206308] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 dsm | [ 0.207694] Speculative Store Bypass: Vulnerable dsm | [ 0.223980] Freeing SMP alternatives memory: 24K dsm | [ 0.230486] x2apic enabled dsm | [ 0.231488] Switched APIC routing to physical x2apic. dsm | [ 0.233954] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 dsm | [ 0.235449] smpboot: CPU0: Intel(R) Core(TM) i3-4130T CPU @ 2.90GHz (family: 0x6, model: 0x3c, stepping: 0x3) dsm | [ 0.237946] Performance Events: 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. dsm | [ 0.245626] ... version: 2 dsm | [ 0.246605] ... bit width: 48 dsm | [ 0.247596] ... generic registers: 4 dsm | [ 0.248556] ... value mask: 0000ffffffffffff dsm | [ 0.249838] ... max period: 00007fffffffffff dsm | [ 0.251072] ... fixed-purpose events: 3 dsm | [ 0.252037] ... event mask: 000000070000000f dsm | [ 0.253291] KVM setup paravirtual spinlock dsm | [ 0.254481] x86: Booted up 1 node, 1 CPUs dsm | [ 0.255519] smpboot: Total of 1 processors activated (5786.59 BogoMIPS) dsm | [ 0.257481] devtmpfs: initialized dsm | [ 0.258523] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns dsm | [ 0.260908] futex hash table entries: 256 (order: 2, 16384 bytes) dsm | [ 0.262634] NET: Registered protocol family 16 dsm | [ 0.263889] cpuidle: using governor ladder dsm | [ 0.264907] cpuidle: using governor menu dsm | [ 0.265918] ACPI: bus type PCI registered dsm | [ 0.267025] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 dsm | [ 0.268710] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) dsm | [ 0.270931] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 dsm | [ 0.272649] PCI: Using configuration type 1 for base access dsm | [ 0.274391] perf_event_intel: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off dsm | [ 0.278454] ACPI: Added _OSI(Module Device) dsm | [ 0.279587] ACPI: Added _OSI(Processor Device) dsm | [ 0.280665] ACPI: Added _OSI(3.0 _SCP Extensions) dsm | [ 0.281809] ACPI: Added _OSI(Processor Aggregator Device) dsm | [ 0.285444] ACPI: Interpreter enabled dsm | [ 0.286487] ACPI: (supports S0 S4 S5) dsm | [ 0.287376] ACPI: Using IOAPIC for interrupt routing dsm | [ 0.288582] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug dsm | [ 0.292164] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) dsm | [ 0.293658] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] dsm | [ 0.295821] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug] dsm | [ 0.297578] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] dsm | [ 0.299407] PCI host bridge to bus 0000:00 dsm | [ 0.300460] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] dsm | [ 0.302134] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] dsm | [ 0.303856] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] dsm | [ 0.305667] pci_bus 0000:00: root bus resource [mem 0x40000000-0xafffffff window] dsm | [ 0.307429] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] dsm | [ 0.309220] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] dsm | [ 0.311035] pci_bus 0000:00: root bus resource [bus 00-ff] dsm | [ 0.366399] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO dsm | [ 0.376244] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) dsm | [ 0.377817] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) dsm | [ 0.379341] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) dsm | [ 0.380853] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) dsm | [ 0.382385] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *10 11) dsm | [ 0.383933] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *10 11) dsm | [ 0.385631] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 *11) dsm | [ 0.387210] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 *11) dsm | [ 0.388685] ACPI: PCI Interrupt Link [GSIA] (IRQs *16) dsm | [ 0.390034] ACPI: PCI Interrupt Link [GSIB] (IRQs *17) dsm | [ 0.391303] ACPI: PCI Interrupt Link [GSIC] (IRQs *18) dsm | [ 0.392603] ACPI: PCI Interrupt Link [GSID] (IRQs *19) dsm | [ 0.393931] ACPI: PCI Interrupt Link [GSIE] (IRQs *20) dsm | [ 0.395235] ACPI: PCI Interrupt Link [GSIF] (IRQs *21) dsm | [ 0.396534] ACPI: PCI Interrupt Link [GSIG] (IRQs *22) dsm | [ 0.397829] ACPI: PCI Interrupt Link [GSIH] (IRQs *23) dsm | [ 0.399248] ACPI: Enabled 2 GPEs in block 00 to 3F dsm | [ 0.401170] vgaarb: loaded dsm | [ 0.401921] SCSI subsystem initialized dsm | [ 0.402938] pps_core: LinuxPPS API ver. 1 registered dsm | [ 0.404091] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> dsm | [ 0.406145] PTP clock support registered dsm | [ 0.407491] PCI: Using ACPI for IRQ routing dsm | [ 0.471327] clocksource: Switched to clocksource kvm-clock dsm | [ 0.478200] AppArmor: AppArmor Filesystem Enabled dsm | [ 0.479404] pnp: PnP ACPI init dsm | [ 0.480329] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved dsm | [ 0.482210] pnp: PnP ACPI: found 5 devices dsm | [ 0.489201] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns dsm | [ 0.491344] NET: Registered protocol family 2 dsm | [ 0.492526] TCP established hash table entries: 8192 (order: 4, 65536 bytes) dsm | [ 0.494210] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) dsm | [ 0.495758] TCP: Hash tables configured (established 8192 bind 8192) dsm | [ 0.497291] UDP hash table entries: 512 (order: 2, 16384 bytes) dsm | [ 0.498715] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) dsm | [ 0.500272] NET: Registered protocol family 1 dsm | [ 0.596287] Trying to unpack rootfs image as initramfs... dsm | [ 1.419053] decompress cpio completed and skip redundant lzma dsm | [ 1.421031] Freeing initrd memory: 5268K dsm | [ 1.422088] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 10737418240 ms ovfl timer dsm | [ 1.424164] hw unit of domain pp0-core 2^-0 Joules dsm | [ 1.425284] hw unit of domain package 2^-0 Joules dsm | [ 1.426404] hw unit of domain dram 2^-0 Joules dsm | [ 1.427460] hw unit of domain pp1-gpu 2^-0 Joules dsm | [ 1.430469] audit: initializing netlink subsys (disabled) dsm | [ 1.431815] audit: type=2000 audit(1743087074.691:1): initialized dsm | [ 1.433410] Initialise system trusted keyring dsm | [ 1.471885] VFS: Disk quotas dquot_6.6.0 dsm | [ 1.472871] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) dsm | [ 1.474689] Key type asymmetric registered dsm | [ 1.475696] Asymmetric key parser 'x509' registered dsm | [ 1.476829] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) dsm | [ 1.478527] io scheduler noop registered (default) dsm | [ 1.479731] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 dsm | [ 1.481026] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 dsm | [ 2.341841] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled dsm | [ 2.367713] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A dsm | [ 2.430322] tsc: Refined TSC clocksource calibration: 2893.294 MHz dsm | [ 2.431780] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b483f0c36, max_idle_ns: 440795226749 ns dsm | [ 2.575361] brd: module loaded dsm | [ 2.576296] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized dsm | [ 2.577753] Loading iSCSI transport class v2.0-870. dsm | [ 2.610178] rdac: device handler registered dsm | [ 2.639303] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16 dsm | [ 2.641326] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode dsm | [ 2.643270] ahci 0000:00:1f.2: flags: 64bit ncq only dsm | [ 2.777348] scsi host0: ahci dsm | [ 2.779063] scsi host1: ahci dsm | [ 2.781526] scsi host2: ahci dsm | [ 2.787655] scsi host3: ahci dsm | [ 2.792353] scsi host4: ahci dsm | [ 2.796947] scsi host5: ahci dsm | [ 2.797798] ata1: SATA max UDMA/133 abar m4096@0xfebff000 port 0xfebff100 irq 24 dsm | [ 2.799522] ata2: SATA max UDMA/133 abar m4096@0xfebff000 port 0xfebff180 irq 24 dsm | [ 2.801235] ata3: SATA max UDMA/133 abar m4096@0xfebff000 port 0xfebff200 irq 24 dsm | [ 2.802957] ata4: SATA max UDMA/133 abar m4096@0xfebff000 port 0xfebff280 irq 24 dsm | [ 2.804607] ata5: SATA max UDMA/133 abar m4096@0xfebff000 port 0xfebff300 irq 24 dsm | [ 2.806349] ata6: SATA max UDMA/133 abar m4096@0xfebff000 port 0xfebff380 irq 24 dsm | [ 2.808221] rtc_cmos 00:03: RTC can wake from S4 dsm | [ 2.832049] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 dsm | [ 2.833665] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram dsm | [ 2.835218] i2c /dev entries driver dsm | [ 2.836161] md: raid1 personality registered for level 1 dsm | [ 2.837545] NET: Registered protocol family 17 dsm | [ 2.838622] Key type dns_resolver registered dsm | [ 2.851373] mce: Using 10 MCE banks dsm | [ 2.852476] registered taskstats version 1 dsm | [ 2.853495] Loading compiled-in untrusted X.509 certificates dsm | [ 2.854787] Loading compiled-in X.509 certificates dsm | [ 2.855951] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329' dsm | [ 2.868591] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089' dsm | [ 2.871017] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28' dsm | [ 2.873616] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5' dsm | [ 2.875897] page_owner is disabled dsm | [ 2.876677] AppArmor: AppArmor sha1 policy hashing enabled dsm | [ 2.878661] rtc_cmos 00:03: setting system clock to 2025-03-27 14:51:15 UTC (1743087075) dsm | [ 3.114407] ata1: SATA link down (SStatus 0 SControl 300) dsm | [ 3.115875] ata2: SATA link down (SStatus 0 SControl 300) dsm | [ 3.117374] ata3: SATA link down (SStatus 0 SControl 300) dsm | [ 3.119374] ata4: SATA link down (SStatus 0 SControl 300) dsm | [ 3.121374] ata5: SATA link down (SStatus 0 SControl 300) dsm | [ 3.122859] ata6: SATA link down (SStatus 0 SControl 300) dsm | [ 3.125216] Freeing unused kernel memory: 1004K dsm | [ 3.126354] Write protecting the kernel read-only data: 8192k dsm | [ 3.127948] Freeing unused kernel memory: 780K dsm | [ 3.129713] Freeing unused kernel memory: 376K dsm | START /linuxrc.syno dsm | START /linuxrc.syno.impl dsm | Insert basic USB modules... dsm | :: Loading module usb-common ... [ OK ] dsm | :: Loading module usbcore[ 3.188810] ACPI: bus type USB registered dsm | [ 3.189875] usbcore: registered new interface driver usbfs dsm | [ 3.191198] usbcore: registered new interface driver hub dsm | [ 3.192536] usbcore: registered new interface driver ethub dsm | [ 3.193877] usbcore: registered new device driver usb dsm | ... [ OK ] dsm | :: Loading module ehci-hcd[ 3.217573] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver dsm | ... [ OK ] dsm | :: Loading module ehci-pci[ 3.228606] ehci-pci: EHCI PCI platform driver dsm | ... [ OK ] dsm | :: Loading module uhci-hcd[ 3.242270] uhci_hcd: USB Universal Host Controller Interface driver dsm | ... [ OK ] dsm | :: Loading module xhci-hcd ... [ OK ] dsm | Insert net driver(Mindspeed only)... dsm | [ 3.276124] kvmx64_synobios: loading out-of-tree module taints kernel. dsm | [ 3.277698] kvmx64_synobios: module license 'Synology Inc.' taints kernel. dsm | [ 3.279349] Disabling lock debugging due to kernel taint dsm | [ 3.283585] synobios ioctl TCGETS /dev/ttyS1 failed dsm | [ 3.284804] synobios unable to set termios of /dev/ttyS1 dsm | [ 3.286334] 2025-3-27 14:51:15 UTC dsm | [ 3.287144] synobios: load, major number 201 dsm | [ 3.288165] Brand: Synology dsm | [ 3.288844] Model: VirtualDSM dsm | [ 3.289577] set group disks wakeup number to 4, spinup time deno 7 dsm | [ 3.291058] synobios cpu_arch proc entry initialized dsm | [ 3.292268] synobios crypto_hw proc entry initialized dsm | [ 3.293461] synobios syno_platform proc entry initialized dsm | Starting /usr/syno/bin/synocfgen... dsm | /usr/syno/bin/synocfgen returns 0 dsm | [ 3.308196] Module [kvmx64_synobios] is removed. dsm | [ 3.309379] synobios: unload dsm | [ 3.317873] ACPI: PCI Interrupt Link [GSIF] enabled at IRQ 21 dsm | [ 3.320601] ACPI: PCI Interrupt Link [GSIH] enabled at IRQ 23 dsm | [ 3.323337] ACPI: PCI Interrupt Link [GSIE] enabled at IRQ 20 dsm | [ 3.325975] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22 dsm | [ 3.372828] scsi host6: Virtio SCSI HBA dsm | [ 3.376670] scsi 6:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 dsm | [ 3.381582] sd 6:0:0:0: [synoboot] 225280 512-byte logical blocks: (115 MB/110 MiB) dsm | [ 3.383954] sd 6:0:0:0: [synoboot] Write Protect is off dsm | [ 3.386091] sd 6:0:0:0: [synoboot] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA dsm | [ 3.399608] synoboot: synoboot1 synoboot2 dsm | [ 3.405839] sd 6:0:0:0: [synoboot] Attached SCSI disk dsm | [ 4.907235] scsi host7: Virtio SCSI HBA dsm | [ 4.909863] scsi 7:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 dsm | [ 4.913055] sd 7:0:0:0: [sda] 9676832 512-byte logical blocks: (4.95 GB/4.61 GiB) dsm | [ 4.915064] sd 7:0:0:0: [sda] Write Protect is off dsm | [ 4.917138] sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA dsm | [ 4.932521] sda: sda1 sda2 dsm | [ 4.937543] sd 7:0:0:0: [sda] Attached SCSI disk dsm | [ 6.443218] scsi host8: Virtio SCSI HBA dsm | [ 6.445839] scsi 8:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 dsm | [ 6.448956] sd 8:0:0:0: [sdb] 33554432 512-byte logical blocks: (17.2 GB/16.0 GiB) dsm | [ 6.451095] sd 8:0:0:0: [sdb] Write Protect is off dsm | [ 6.453104] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA dsm | [ 6.471804] sdb: sdb1 dsm | [ 6.478427] sd 8:0:0:0: [sdb] Attached SCSI disk dsm | [ 7.994662] random: nonblocking pool is initialized dsm | Partition Version=8 dsm | /sbin/e2fsck exists, checking /dev/sda1... dsm | e2fsck 1.44.1 (24-Mar-2018) dsm | /dev/sda1 has unsupported feature(s): FEATURE_C12 dsm | e2fsck: Get a newer version of e2fsck! dsm | /sbin/e2fsck -yvf r[ 8.043315] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities dsm | eturns 12 dsm | Mounting /dev/sda1 /tmpRoot dsm | [ 8.052937] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) dsm | ------------upgrade dsm | Begin upgrade procedure dsm | e2fsck 1.44.1 (24-Mar-2018) dsm | /sbin/e2fsck: No such file or directory while trying to open /dev/sda3 dsm | Mount data partition: /dev/sda3 -> /tmpData dsm | mount: mounting /dev/sda3 on /tmpData failed: No such file or directory dsm | Mount data partition failed dsm | ============upgrade dsm | ------------bootup-smallupdate dsm | mount: mounting /dev/sda3 on /tmpRoot/datamnt failed: No such file or directory dsm | Try bootup smallupdate dsm | UPGRADE_BOOTUP_SMALLUPDATE dsm | No patch exist. Skip Packed Bootup SmallUpdate dsm | Sparse files don't exist. Skip Sparse Bootup SmallUpdate dsm | Finished synoupgrade --bootup-smallupdate dsm | umount: can't unmount /tmpRoot/datamnt: Invalid argument dsm | ============bootup-smallupdate dsm | Root check fail, then do selfcheck dsm | Copyright (c) 2003-2021 Synology Inc. All rights reserved. dsm | dsm | Check Success dsm | Selfcheck pass, enter DSM. dsm | Wait 2 seconds for synology manufactory device dsm | Thu Mar 27 14:51:33 UTC 2025 dsm | /dev/sda1 /tmpRoot ext4 rw,relatime,data=ordered 0 0 dsm | none /sys/kernel/debug debugfs rw,relatime 0 0 dsm | root: Start backing up logs in junior mode dsm | [ 21.732516] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities dsm | [ 21.737709] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) dsm | umount: /etc/mtab: No such file or directory linuxrc.syno executed successfully. dsm | Post init dsm | [ 21.797584] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities dsm | [ 21.802513] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: barrier=1 dsm | [ 21.906229] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) dsm | [ 21.910551] systemd[1]: Detected virtualization kvm. dsm | [ 21.911776] systemd[1]: Detected architecture x86-64. dsm | dsm | Welcome to Linux! dsm | dsm | [ 21.915647] systemd[1]: Set hostname to <M73>. dsm | [ 22.204366] systemd[1]: Cannot add dependency job for unit synoperfeventd.service, ignoring: Unit synoperfeventd.service is masked. dsm | [ 22.207449] systemd[1]: Cannot add dependency job for unit SynoLedBrightness.service, ignoring: Unit SynoLedBrightness.service is masked. dsm | [ 22.210386] systemd[1]: Cannot add dependency job for unit pkg-install-low-priority-builtin.service, ignoring: Unit pkg-install-low-priority-builtin.service failed to load: No such file or directory. dsm | [ 22.214455] systemd[1]: Cannot add dependency job for unit pkg-install-high-priority-builtin.service, ignoring: Unit pkg-install-high-priority-builtin.service failed to load: No such file or directory. dsm | [ OK ] Created slice Root Slice. dsm | [ 22.221027] systemd[1]: Created slice Root Slice. dsm | [ 22.222182] systemd[1]: Starting Root Slice. dsm | [ OK ] Created slice SNMP. dsm | [ 22.224492] systemd[1]: Created slice SNMP. dsm | [ 22.225531] systemd[1]: Starting SNMP. dsm | [ OK ] Created slice Synology DSM Storage Service. dsm | [ 22.228044] systemd[1]: Created slice Synology DSM Storage Service. dsm | [ 22.229547] systemd[1]: Starting Synology DSM Storage Service. dsm | [ OK ] Created slice Synology DSM desktop service. dsm | [ 22.232621] systemd[1]: Created slice Synology DSM desktop service. dsm | [ 22.234142] systemd[1]: Starting Synology DSM desktop service. dsm | [ OK ] Created slice Synology Cache Advisor. dsm | [ 22.237050] systemd[1]: Created slice Synology Cache Advisor. dsm | [ 22.238467] systemd[1]: Starting Synology Cache Advisor. dsm | [ OK ] Listening on Journal Audit Socket. dsm | [ 22.241290] systemd[1]: Listening on Journal Audit Socket. dsm | [ 22.242635] systemd[1]: Starting Journal Audit Socket. dsm | [ OK ] Created slice RAID Resync Process. ...ing Resync, Repair and Reshape.. dsm | [ 22.246020] systemd[1]: Created slice RAID Resync Process. Including Resync, Repair and Reshape.. dsm | [ 22.248148] systemd[1]: Starting RAID Resync Process. Including Resync, Repair and Reshape.. dsm | [ OK ] Listening on udev Kernel Socket. dsm | [ 22.251581] systemd[1]: Listening on udev Kernel Socket. dsm | [ 22.252908] systemd[1]: Starting udev Kernel Socket. dsm | [ OK ] Reached target Paths. dsm | [ 22.255385] systemd[1]: Reached target Paths. dsm | [ 22.256506] systemd[1]: Starting Paths. dsm | [ OK ] Reached target Swap. dsm | [ 22.258617] systemd[1]: Reached target Swap. dsm | [ 22.259667] systemd[1]: Starting Swap. dsm | [ OK ] Created slice scemd. dsm | [ 22.261848] systemd[1]: Created slice scemd. dsm | [ 22.262899] systemd[1]: Starting scemd. dsm | [ INFO ] dev-hvc0.device is not active. dsm | [DEPEND] Dependency failed for agetty for console output(for vDSM). dsm | [ 22.267104] systemd[1]: Dependency failed for agetty for console output(for vDSM). dsm | [ 22.268944] systemd[1]: Job vdsm_dummy_tty.service/start failed with result 'dependency'. dsm | [ OK ] Created slice System Slice. dsm | [ 22.272298] systemd[1]: Created slice System Slice. dsm | [ 22.273514] systemd[1]: Starting System Slice. dsm | [ OK ] Created slice User and Session Slice. dsm | [ 22.276258] systemd[1]: Created slice User and Session Slice. dsm | [ 22.277697] systemd[1]: Starting User and Session Slice. dsm | [ OK ] Created slice OAuthService's slice. dsm | [ 22.280587] systemd[1]: Created slice OAuthService's slice. dsm | [ 22.281990] systemd[1]: Starting OAuthService's slice. dsm | [ OK ] Listening on Journal Socket. dsm | [ 22.284638] systemd[1]: Listening on Journal Socket. dsm | [ 22.285917] systemd[1]: Starting Journal Socket. dsm | [ 22.287526] systemd[1]: Starting Set boot sequence config... dsm | Starting Set boot sequence config... dsm | [ 22.290490] systemd[1]: Starting Load ntb_brd module... dsm | Starting Load ntb_brd module... dsm | [ 22.294730] systemd[1]: Starting check integrity of rd.gz decompression... dsm | Starting check integrity of rd.gz decompression... dsm | [ 22.301677] systemd[1]: Starting Journal Socket (/dev/log). dsm | [ 22.305738] systemd[1]: Starting Set time zone information to kernel... dsm | Starting Set time zone information to kernel... dsm | [ 22.315344] systemd[1]: Starting Synology Task Scheduler Init... dsm | Starting Synology Task Scheduler Init... dsm | [ OK ] Created slice Package Center Slice. dsm | [ 22.324506] systemd[1]: Created slice Package Center Slice. dsm | [ 22.326061] systemd[1]: Starting Package Center Slice. dsm | [ 22.329923] systemd[1]: Mounting Temporary Directory... dsm | Mounting Temporary Directory... dsm | [ 22.333113] systemd[1]: Starting unbind USB device... dsm | Starting unbind USB device... dsm | [ 22.337738] systemd[1]: Starting Link coredump path to volume if possible... dsm | Starting Link coredump path to volume if possible... dsm | [ OK ] Created slice FileStation's slice. dsm | [ 22.347618] systemd[1]: Created slice FileStation's slice. dsm | [ 22.349350] systemd[1]: Starting FileStation's slice. dsm | [ OK ] Created slice Shared Folder Sync. dsm | [ 22.352950] systemd[1]: Created slice Shared Folder Sync. dsm | [ 22.354441] systemd[1]: Starting Shared Folder Sync. dsm | [ OK ] Created slice Python2's slice. dsm | [ 22.357327] systemd[1]: Created slice Python2's slice. dsm | [ 22.358708] systemd[1]: Starting Python2's slice. dsm | [ OK ] Created slice system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice. dsm | [ 22.362171] systemd[1]: Created slice system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice. dsm | [ 22.364290] systemd[1]: Starting system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice. dsm | [ OK ] Created slice Task Scheduler Group. dsm | [ 22.367965] systemd[1]: Created slice Task Scheduler Group. dsm | [ 22.369446] systemd[1]: Starting Task Scheduler Group. dsm | [ OK ] Reached target Timers. dsm | [ 22.372158] systemd[1]: Reached target Timers. dsm | [ 22.373382] systemd[1]: Starting Timers. dsm | [ 22.375045] systemd[1]: Starting Set hostname... dsm | Starting Set hostname... dsm | [ 22.377873] systemd[1]: Starting Disabling fan checking flag ...... dsm | Starting Disabling fan checking flag ...... dsm | [ OK ] Created slice system-serial\x2dgetty.slice. dsm | [ 22.385481] systemd[1]: Created slice system-serial\x2dgetty.slice. dsm | [ 22.387704] systemd[1]: Starting system-serial\x2dgetty.slice. dsm | [ OK ] Created slice BTRFS Space Reclaim. dsm | [ 22.390901] systemd[1]: Created slice BTRFS Space Reclaim. dsm | [ 22.392358] systemd[1]: Starting BTRFS Space Reclaim. dsm | [ OK ] Created slice Synology Index slice (WAT). dsm | [ 22.395352] systemd[1]: Created slice Synology Index slice (WAT). dsm | [ 22.396945] systemd[1]: Starting Synology Index slice (WAT). dsm | [ OK ] Created slice VirtualDSM daemon slice. dsm | [ 22.400037] systemd[1]: Created slice VirtualDSM daemon slice. dsm | [ 22.401526] systemd[1]: Starting VirtualDSM daemon slice. dsm | [ OK ] Created slice SSDP service. dsm | [ 22.404415] systemd[1]: Created slice SSDP service. dsm | [ 22.405696] systemd[1]: Starting SSDP service. dsm | [ 22.407330] systemd[1]: Mounting Debug File System... dsm | Mounting Debug File System... dsm | [ 22.412617] systemd[1]: Starting Load Kernel Modules... dsm | Starting Load Kernel Modules... dsm | [ OK ] Created slice SMBService's slice. dsm | [ 22.418371] systemd[1]: Created slice SMBService's slice. dsm | [ 22.419937] systemd[1]: Starting SMBService's slice. dsm | [ OK ] Reached target Slices. dsm | [ 22.422982] systemd[1]: Reached target Slices. dsm | [ 22.424226] systemd[1]: Starting Slices. dsm | [ OK ] Created slice SynoFinder's slice. dsm | [ 22.427375] systemd[1]: Created slice SynoFinder's slice. dsm | [ 22.428780] systemd[1]: Starting SynoFinder's slice. dsm | [ OK ] Created slice ScsiTarget's slice. dsm | [ 22.431678] systemd[1]: Created slice ScsiTarget's slice. dsm | [ 22.433228] systemd[1]: Starting ScsiTarget's slice. dsm | [ OK ] Created slice Synology DSM internal service. dsm | [ 22.437164] systemd[1]: Created slice Synology DSM internal service. dsm | [ 22.438956] systemd[1]: Starting Synology DSM internal service. dsm | [ 22.441873] systemd[1]: Starting Synology swap... dsm | Starting Synology swap... dsm | [ OK ] Created slice Synology Swap Works. dsm | [ 22.448408] systemd[1]: Created slice Synology Swap Works. dsm | [ 22.451838] systemd[1]: Starting Synology Swap Works. dsm | [ OK ] Created slice Synology Flashcache. dsm | [ 22.456091] systemd[1]: Created slice Synology Flashcache. dsm | [ 22.460367] systemd[1]: Starting Synology Flashcache. dsm | [ OK ] Created slice dsm6-ui-compatible's slice. dsm | [ 22.465113] systemd[1]: Created slice dsm6-ui-compatible's slice. dsm | [ 22.469745] systemd[1]: Starting dsm6-ui-compatible's slice. dsm | [ OK ] Listening on udev Control Socket. dsm | [ 22.474192] systemd[1]: Listening on udev Control Socket. dsm | [ 22.475845] systemd[1]: Starting udev Control Socket. dsm | [ OK ] Created slice synobackup daemon slice. dsm | [ 22.481196] systemd[1]: Created slice synobackup daemon slice. dsm | [ 22.483465] systemd[1]: Starting synobackup daemon slice. dsm | [ OK ] Created slice BTRFS Optimization. dsm | [ 22.487752] systemd[1]: Created slice BTRFS Optimization. dsm | [ 22.489867] systemd[1]: Starting BTRFS Optimization. dsm | [ OK ] Created slice SecureSignIn's slice. dsm | [ 22.497591] systemd[1]: Created slice SecureSignIn's slice. dsm | [ 22.499039] systemd[1]: Starting SecureSignIn's slice. dsm | [ OK ] Mounted Debug File System. dsm | [ 22.502701] systemd[1]: Mounted Debug File System. dsm | [ OK ] Mounted Temporary Directory. dsm | [ 22.505700] systemd[1]: Mounted Temporary Directory. dsm | [ OK ] Started Set boot sequence config. dsm | [ 22.508627] systemd[1]: Started Set boot sequence config. dsm | [ OK ] Started Load ntb_brd module. dsm | [ 22.517857] NET: Registered protocol family 10 dsm | [ 22.520941] systemd[1]: Started Load ntb_brd module. dsm | [ OK ] Started check integrity of rd.gz decompression. dsm | [ 22.524931] systemd[1]: Started check integrity of rd.gz decompression. dsm | [ OK ] Listening on Journal Socket (/dev/log). dsm | [ 22.530104] sit: IPv6 over IPv4 tunneling driver dsm | [ 22.532936] systemd[1]: Listening on Journal Socket (/dev/log). dsm | [ OK ] Started Set time zone information to kernel. dsm | [ 22.541471] zram: Added device: zram0 dsm | [ 22.543768] systemd[1]: Started Set time zone information to kernel. dsm | [ 22.549124] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com dsm | [ OK ] Started Synology Task Scheduler Init. dsm | [ 22.555900] systemd[1]: Started Synology Task Scheduler Init. dsm | [ OK ] Started unbind USB device. dsm | [ 22.562948] systemd[1]: Started unbind USB device. dsm | [ 22.564946] sd 6:0:0:0: Attached scsi generic sg0 type 0 dsm | [ 22.567288] sd 7:0:0:0: Attached scsi generic sg1 type 0 dsm | [ OK ] Started Link coredump path to volume if possible. dsm | [ 22.570922] sd 8:0:0:0: Attached scsi generic sg2 type 0 dsm | [ 22.572569] systemd[1]: Started Link coredump path to volume if possible. dsm | [ OK ] Started Set hostname. dsm | [ 22.576808] systemd[1]: Started Set hostname. dsm | [ OK ] Started Disabling fan checking flag .... dsm | [ 22.582524] systemd[1]: Started Disabling fan checking flag .... dsm | [ OK ] Reached target Sockets. dsm | [ 22.586978] i40evf: Intel(R) 40-10 Gigabit Virtual Function Network Driver - version 3.6.15 dsm | [ 22.589035] Copyright(c) 2013 - 2018 Intel Corporation. dsm | [ 22.590395] systemd[1]: Reached target Sockets. dsm | [ 22.591599] systemd[1]: Starting Sockets. dsm | [ 22.594184] systemd[1]: Starting Journal Service... dsm | [ 22.596357] Adding 2097148k swap on /dev/sda2. Priority:-1 extents:1 across:2097148k SS dsm | [ 22.598814] zram0: detected capacity change from 0 to 627048448 dsm | [ 22.600542] igbvf: Intel(R) Gigabit Virtual Function Driver - 2.3.8.2 dsm | [ 22.602029] igbvf: Copyright (c) 1999-2015 Intel Corporation. dsm | Starting Journal Service... dsm | [ OK ] Reached target Local File Systems. dsm | [ 22.609059] systemd[1]: Reached target Local File Systems. dsm | [ 22.611807] ixgbevf: Intel(R) 10GbE PCI Express Virtual Function Driver - version 4.5.3 dsm | [ 22.613735] Copyright(c) 1999 - 2019 Intel Corporation. dsm | [ 22.615580] Adding 612348k swap on /dev/zram0. Priority:1 extents:1 across:612348k SS dsm | [ 22.618403] systemd[1]: Starting Local File Systems. dsm | [ 22.628220] systemd[1]: Starting D-Bus System Message Bus... dsm | Starting D-Bus System Message Bus... dsm | [ 22.633454] usbcore: registered new interface driver usb-storage dsm | [ 22.636461] systemd[1]: Starting udev Coldplug all Devices... dsm | Starting udev Coldplug all Devices... dsm | [ 22.641520] systemd[1]: Starting D-Bus Session Message Bus... dsm | Starting D-Bus Session Message Bus... dsm | [ 22.650378] systemd[1]: Starting Set boot sequence config for temporary use... dsm | Starting Set boot sequence config for temporary use... dsm | [ 22.658613] systemd[1]: Starting Mount usb fs... dsm | Starting Mount usb fs... dsm | [ OK ] Started Journal Service. dsm | [ 22.671295] systemd[1]: Started Journal Service. dsm | [ OK ] Started Load Kernel Modules. dsm | [ OK ] Started Synology swap. dsm | [ OK ] Started Set boot sequence config for temporary use. dsm | Starting Load Kernel Modules in Kernel Project... dsm | Starting Apply etc.defaults/sysctl.conf kernel variable.... dsm | Mounting Configuration File System... dsm | Starting Load Fan Modules in Kernel Project... dsm | [ 22.720122] usbcore: registered new interface driver usblp dsm | Starting Adjust NIC sequence... dsm | Starting System Logger Daemon... dsm | Starting Flush Journal to Persistent Storage... dsm | [ 22.744930] usbcore: registered new interface driver usbhid dsm | [ 22.746292] usbhid: USB HID core driver dsm | [ OK ] Mounted Configuration File System. dsm | [ OK ] Started D-Bus Session Message Bus. dsm | [ OK ] Started Apply etc.defaults/sysctl.conf kernel variable.. dsm | [ 22.775988] synobios ioctl TCGETS /dev/ttyS1 failed dsm | [ 22.777229] synobios unable to set termios of /dev/ttyS1 dsm | [ 22.778803] 2025-3-27 14:51:34 UTC dsm | [ 22.779639] synobios: load, major number 201 dsm | [ 22.780671] Brand: Synology dsm | [ 22.781366] Model: VirtualDSM dsm | [ 22.782079] set group disks wakeup number to 4, spinup time deno 7 dsm | [ 22.783520] synobios cpu_arch proc entry initialized dsm | [ 22.784702] synobios crypto_hw proc entry initialized dsm | [ 22.785917] synobios syno_platform proc entry initialized dsm | [ OK ] Started Load Fan Modules in Kernel Project. dsm | [FAILED] Failed to start Adjust NIC sequence. dsm | See "systemctl status SynoInitEth.service" for details. dsm | [ OK ] Started D-Bus System Message Bus. dsm | [ OK ] Started udev Coldplug all Devices. dsm | [ 22.816169] systemd-journald[5148]: Received request to flush runtime journal from PID 1 dsm | [ OK ] Started Flush Journal to Persistent Storage. dsm | Starting Create Volatile Files and Directories... dsm | [ OK ] Started D-Bus System Message Bus. dsm | Starting Apply etc/sysctl.conf kernel variable.... dsm | [FAILED] Failed to start Mount usb fs. dsm | See "systemctl status syno-mount-usbfs.service" for details. dsm | [ OK ] Started Apply etc/sysctl.conf kernel variable.. dsm | Starting Apply Kernel Variables... dsm | [ OK ] Started Create Volatile Files and Directories. dsm | Starting synodsmnotify... dsm | [ OK ] Reached target Create SDK locks directory. dsm | Starting Check /etc/synoinfo.conf... dsm | Starting Check Synology user info consistency... dsm | Starting Check Synology group info consistency... dsm | [ OK ] Started Apply Kernel Variables. dsm | [ OK ] Started synodsmnotify. dsm | Starting Apply kernel variable kernel.sem at least 1024... dsm | Starting Apply kernel variable vm.min-free-kbytes... dsm | [ 22.916653] AVX2 version of gcm_enc/dec engaged. dsm | [ 22.917882] AES CTR mode by8 optimization enabled dsm | Starting Apply kernel variable kernel-shmmni at least 16384... dsm | [ OK ] Started Check /etc/synoinfo.conf. dsm | [ OK ] Started Apply kernel variable kernel-shmmni at least 16384. dsm | [ OK ] Started Apply kernel variable kernel.sem at least 1024. dsm | [ OK ] Started Check Synology user info consistency. dsm | [ OK ] Started Apply kernel variable vm.min-free-kbytes. dsm | [ OK ] Started Load Kernel Modules in Kernel Project. dsm | Starting Software Init Led for support led v2 models... dsm | Starting DSM Release Rolling Group ID... dsm | [ OK ] Started Check Synology group info consistency. dsm | [ OK ] Started DSM Release Rolling Group ID. dsm | [ OK ] Started Software Init Led for support led v2 models. dsm | [ OK ] Reached target User and Group Name Lookups. dsm | Starting move domain or ldap user p...der to domain or ldap folder.... dsm | Starting Prepare notification cache data... dsm | [ OK ] Reached target Synology local user and group ready. dsm | [ OK ] Started move domain or ldap user pr...older to domain or ldap folder.. dsm | [ OK ] Started Prepare notification cache data. dsm | [ OK ] Started System Logger Daemon. dsm | Starting Synology Log bootup start... dsm | [DEPEND] Dependency failed for rebuild local user and group db. dsm | Starting synodrnode... dsm | [ OK ] Reached target Synology root filesystem (rw) ready. dsm | Starting DSM Installation ID... dsm | [ OK ] Reached target Network (Pre). dsm | Starting Set arp ignore... dsm | Starting Synology Network Daemon... dsm | Starting Umount initrd... dsm | Starting Clean UPS config... dsm | Starting Set Eunit Sequence... dsm | Starting syno-cgi-keygen.service... dsm | Starting Load AppArmor profiles... dsm | Starting Synology Default TLS Profile... dsm | Starting DSM Boot Health Check... dsm | Starting Synology check locale... dsm | [ OK ] Started Synology Log bootup start. dsm | [ OK ] Started synodrnode. dsm | [ OK ] Started DSM Installation ID. dsm | [ OK ] Started Set arp ignore. dsm | [ OK ] Started Synology Network Daemon. dsm | [ OK ] Started Umount initrd. dsm | [ OK ] Started Clean UPS config. dsm | [ OK ] Started Set Eunit Sequence. dsm | [ OK ] Started Synology Default TLS Profile. dsm | [ OK ] Started Synology check locale. dsm | Starting udev Kernel Device Manager... dsm | Starting Wait for Synology Network to be Configured... dsm | Starting rc.network... dsm | [ OK ] Started syno-cgi-keygen.service. dsm | [ OK ] Started DSM Boot Health Check. dsm | [ OK ] Started udev Kernel Device Manager. dsm | [ OK ] Started Load AppArmor profiles. dsm | [ OK ] Reached target System Initialization. dsm | [ OK ] Started Serial Getty on ttyS0. dsm | Starting Serial Getty on ttyS0... dsm | [ OK ] Reached target Login Prompts. dsm | [ OK ] Started Synology token manager. dsm | Starting Synology token manager... dsm | [ OK ] Started Synology task manager. dsm | Starting Synology task manager... dsm | Starting bootup upgrade sha package... dsm | [ OK ] Started bootup upgrade sha package. dsm | [ OK ] Found device /dev/synoboot2. dsm | [ OK ] Reached target Synology synoboot2 done. dsm | [ OK ] Reached target Basic System. dsm | Starting Prepare SSDP configs... dsm | Starting Prepare snmp configs... dsm | [ OK ] Started synobackup daemon. dsm | Starting synobackup daemon... dsm | Starting synoindex check if there a...ny synoindex-related packages... dsm | Starting Samba Environment Setup Unit... dsm | Starting Control RC power... dsm | Starting Synology filesytem check on bootup... dsm | Starting always preprocess jobs before any package is started... dsm | Starting WD idle3 timer... dsm | Starting Synology Event Task Scheduler Init... dsm | Starting System Profile Tuning... dsm | [ 24.432227] exdisplay_handler not implemented dsm | Starting Log Rotate Daemon... dsm | Starting Synology Schedule Daemon... dsm | Starting Synology guest service daemon... dsm | Starting synoconfd daemon... dsm | [ OK ] Started Synology log accounting service. dsm | Starting Synology log accounting service... dsm | Starting Service for irq balance... dsm | Starting Login Service... dsm | Starting Synology guest command handle daemon... dsm | Starting Hibernation debug check... dsm | Starting Synology log notification service... dsm | Starting Synology firmware DLMC... dsm | [ OK ] Started Prepare SSDP configs. dsm | [ OK ] Started Prepare snmp configs. dsm | [FAILED] Failed to start synoindex check if ... any synoindex-related packages. dsm | See "systemctl status synoindex-checkpackage.service" for details. dsm | [DEPEND] Dependency failed for synoindex notifyd. dsm | [DEPEND] Dependency failed for synomkthumbd. dsm | [DEPEND] Dependency failed for synoindexd. dsm | [DEPEND] Dependency failed for synoindex mediad. dsm | [DEPEND] Dependency failed for synomkflvd. dsm | [DEPEND] Dependency failed for synoindex scand. dsm | [DEPEND] Dependency failed for synoindex plugind. dsm | [DEPEND] Dependency failed for synoindex workerd. dsm | [ OK ] Started Control RC power. dsm | [ OK ] Started Synology filesytem check on bootup. dsm | [ OK ] Started WD idle3 timer. dsm | [ OK ] Started Synology Event Task Scheduler Init. dsm | [ OK ] Started System Profile Tuning. dsm | [ OK ] Started Log Rotate Daemon. dsm | [ OK ] Started Synology Schedule Daemon. dsm | [ OK ] Started Synology guest service daemon. dsm | [ OK ] Started synoconfd daemon. dsm | [ OK ] Started Service for irq balance. dsm | [ OK ] Started Synology guest command handle daemon. dsm | [ OK ] Started Hibernation debug check. dsm | [ OK ] Started Synology firmware DLMC. dsm | [ OK ] Started Login Service. dsm | Starting Synology guest communication daemon... dsm | Starting Synology space service... dsm | [ OK ] Started Synology guest communication daemon. dsm | [ OK ] Stopped Synology Task Scheduler Vmtouch. dsm | [ OK ] Started Synology Task Scheduler Vmtouch. dsm | Starting Synology Task Scheduler Vmtouch... dsm | [ OK ] Started Samba Environment Setup Unit. dsm | [ OK ] Started always preprocess jobs before any package is started. dsm | [ OK ] Reached target Hook on root ready. dsm | Starting SMBService's service unit... dsm | Starting SecureSignIn's service unit... dsm | Starting Python2's service unit... dsm | [ OK ] Started Synology space service. dsm | Starting Synology virtual space service... dsm | [ OK ] Started Python2's service unit. dsm | [ OK ] Started Synology virtual space service. dsm | [ OK ] Reached target Synology storage pool. dsm | Starting Synology Building Tasks Restore for Storage Manager... dsm | Starting Synology filesystem check service... dsm | [ OK ] Started Synology filesystem check service. dsm | Starting Synology volume service... dsm | [ OK ] Started Synology log notification service. dsm | Stopping Synology Task Scheduler Vmtouch... dsm | [ OK ] Stopped Synology Task Scheduler Vmtouch. dsm | [ OK ] Started Synology Task Scheduler Vmtouch. dsm | Starting Synology Task Scheduler Vmtouch... dsm | [ 26.015262] raid6: sse2x1 gen() 10136 MB/s dsm | [ 26.033278] raid6: sse2x1 xor() 6060 MB/s dsm | [ 26.051274] raid6: sse2x2 gen() 10386 MB/s dsm | [ 26.069265] raid6: sse2x2 xor() 7433 MB/s dsm | [ 26.087261] raid6: sse2x4 gen() 14250 MB/s dsm | [ 26.105263] raid6: sse2x4 xor() 8978 MB/s dsm | [ 26.123263] raid6: avx2x1 gen() 19796 MB/s dsm | [ 26.141260] raid6: avx2x1 xor() 13472 MB/s dsm | [ 26.159262] raid6: avx2x2 gen() 22882 MB/s dsm | [ 26.177260] raid6: avx2x2 xor() 14082 MB/s dsm | [ 26.195260] raid6: avx2x4 gen() 26203 MB/s dsm | [ 26.213260] raid6: avx2x4 xor() 16892 MB/s dsm | [ 26.214309] raid6: using algorithm avx2x4 gen() 26203 MB/s dsm | [ 26.215637] raid6: .... xor() 16892 MB/s, rmw enabled dsm | [ 26.216855] raid6: using avx2x2 recovery algorithm dsm | [ OK ] Started SMBService's service unit. dsm | [ OK ] Created slice system-dhclient.slice. dsm | Starting DHCP client init... dsm | [ OK ] Started DHCP client init. dsm | Starting eth0 DHCP Client... dsm | [ OK ] Started eth0 DHCP Client. dsm | [ OK ] Started SecureSignIn's service unit. dsm | [ OK ] Started rc.network. dsm | Starting Set Multiple Geteway... dsm | Starting PPPoE... dsm | Starting Check if network is ready... dsm | [ OK ] Started PPPoE. dsm | [ OK ] Started Set Multiple Geteway. dsm | [ OK ] Reached target Network. dsm | Starting findhost daemon... dsm | Starting Network Time Service... dsm | [ OK ] Started Synology SCGI. dsm | Starting Synology SCGI... dsm | Starting Synology SCGI SocketIO... dsm | [ OK ] Started findhost daemon. dsm | [ 26.539594] xor: automatically using best checksumming function: dsm | [ 26.550261] avx : 29152.000 MB/sec dsm | [ OK ] Started Network Time Service. dsm | [ 26.604909] Btrfs loaded, crc32c=crc32c-intel dsm | [ 26.606960] BTRFS: device label 2025.03.27-14:19:45 v69057 devid 1 transid 266 /dev/sdb1 dsm | [ 26.611309] BTRFS info (device sdb1): enabling auto syno reclaim space dsm | [ 26.612939] BTRFS info (device sdb1): use ssd allocation scheme dsm | [ 26.614369] BTRFS info (device sdb1): turning on discard dsm | [ 26.615627] BTRFS info (device sdb1): using free space tree dsm | [ 26.616987] BTRFS info (device sdb1): using free block group cache tree dsm | [ 26.618569] BTRFS info (device sdb1): has skinny extents dsm | [ OK ] Started Synology Building Tasks Restore for Storage Manager. dsm | Stopping Synology Task Scheduler Vmtouch... dsm | [ OK ] Stopped Synology Task Scheduler Vmtouch. dsm | [ OK ] Started Synology Task Scheduler Vmtouch. dsm | Starting Synology Task Scheduler Vmtouch... dsm | [ OK ] Started Synology volume service. dsm | Starting Synology volume mount post hook... dsm | [ OK ] Started Synology volume mount post hook. dsm | [ OK ] Reached target Synology data volumes. dsm | Starting daemon for monitor logs and generate alert... dsm | Starting Synology Cron Daemon... dsm | Starting Prepare var service tmp... dsm | Starting Synology Database Update... dsm | Starting Check Synology shared folders... dsm | Starting Fix bind mount explosion problem... dsm | Starting Synology Cache Advisor Service... dsm | Starting Build-in PHP timezone updater... dsm | Starting Syno Data Protection - Btrfs Snapshot Meta Sync... dsm | Starting Syno Data Protection - Btrfs Deleted Subvolume Clean... dsm | Starting Load Bypass Traverse Checking... dsm | Starting daemon for monitor HW/system status... dsm | Starting Syno Data Protection - Btrfs Snapshot Count Sync... dsm | Starting Keep var services homes existing... dsm | Starting move user preference folder to volume.... dsm | Starting Syno Data Protection - Btrfs Snapshot Usage Task Clean... dsm | Starting Check Synology HotSpare Config... dsm | [ OK ] Started SNMP Daemon. dsm | Starting SNMP Daemon... dsm | Starting Daemon for Resource Monitor... dsm | Starting Syno Data Protection - Btrfs Snaptree reconstruct... dsm | [ OK ] Started daemon for monitor logs and generate alert. dsm | [ OK ] Started Synology Cron Daemon. dsm | [ OK ] Started Synology Database Update. dsm | [ OK ] Started Synology Cache Advisor Service. dsm | [ OK ] Started Build-in PHP timezone updater. dsm | [ OK ] Started Syno Data Protection - Btrfs Snapshot Meta Sync. dsm | [ OK ] Started Syno Data Protection - Btrfs Deleted Subvolume Clean. dsm | [ OK ] Started Check Synology shared folders. dsm | [ OK ] Started Load Bypass Traverse Checking. dsm | [ OK ] Started Syno Data Protection - Btrfs Snapshot Count Sync. dsm | [ OK ] Started Keep var services homes existing. dsm | [ OK ] Started Syno Data Protection - Btrfs Snapshot Usage Task Clean. dsm | [ OK ] Started Daemon for Resource Monitor. dsm | [ OK ] Started Syno Data Protection - Btrfs Snaptree reconstruct. dsm | [ OK ] Started Fix bind mount explosion problem. dsm | [ OK ] Started Wait for Synology Network to be Configured. dsm | Starting Synology Network Event Daemon... dsm | Starting Migrate all volume and share to quota DB... dsm | Starting Check share snapshot... dsm | [ OK ] Started Prepare var service tmp. dsm | [ OK ] Started move user preference folder to volume.. dsm | [ OK ] Started Check Synology HotSpare Config. dsm | [ OK ] Started Synology Network Event Daemon. dsm | [ OK ] Started Migrate all volume and share to quota DB. dsm | Starting Synology daemon for monitoring space/disk/cache status... dsm | Starting Nginx... dsm | [ OK ] Started Check share snapshot. dsm | [ OK ] Reached target Synology shared folders. dsm | Starting Remove session if the option enabled.... dsm | Starting synotifyd... dsm | Starting daemon for handle hotplug event... dsm | Starting Shared Folder Sync Daemon... dsm | Starting Build DB link for synolog... dsm | [ OK ] Started synotifyd. dsm | [ OK ] Started Remove session if the option enabled.. dsm | Starting Synology CGI Auth Daemon... dsm | [ OK ] Started Synology CGI Auth Daemon. dsm | [ OK ] Started Synology daemon for monitoring space/disk/cache status. dsm | Starting Sync data scrubbing config... dsm | [ OK ] Started Shared Folder Sync Daemon. dsm | [ 28.421656] Synotify use 16384 event queue size dsm | [ 28.439310] Synotify use 16384 event queue size dsm | [ OK ] Started daemon for handle hotplug event. dsm | [ OK ] Started Sync data scrubbing config. dsm | [ OK ] Started Build DB link for synolog. dsm | [ OK ] Started Check if network is ready. dsm | [ OK ] Reached target Network is Online. dsm | Starting Avahi daemon... dsm | Starting NetBIOS name server... dsm | Starting Set IP Conflict Detect... dsm | Starting Entry for WS-Transfer and WS-Discovery Server... dsm | Starting VPN Client... dsm | Starting deal with remote/ISO mount during when bootup and poweroff... dsm | Starting register ds region by ip... dsm | Starting broadcast synorelayd boot state... dsm | Starting Issue VDSM ready for intialization before boot-done.... dsm | [ 29.032510] capability: warning:
This is normal with Virtual DSM. It doesnt have the same amount of options as the normal DSM. In the FAQ is described how you add multiple disks.
Operating system
CentOS Stream 9
Description
After installing it looks fine, but the Storage Manager misses all the options and only shows volume1. No storage pool creation or any available.
My purpose is to add an external disk to set as target for some backups.
PD: I'm new into DSM...
Docker compose
volumes: dsm_disk: services: dsm: container_name: dsm image: vdsm/virtual-dsm environment: DISK_SIZE: "16G" devices:
Docker log
[+] Running 1/1 ✔ dsm Pulled 1.1s [+] Running 1/1 ✔ Container dsm Recreated 0.1s Attaching to dsm dsm | ❯ Starting Virtual DSM for Docker v7.33... dsm | ❯ For support visit https://github.com/vdsm/virtual-dsm dsm | ❯ CPU: Intel Core i3 4130T | RAM: 4/8 GB | DISK: 12 GB (xfs) | KERNEL: 5.14.0-503.el9.x86_64... dsm | dsm | iptables v1.8.11 (legacy): can't initialize iptables table
nat': Table does not exist (do you need to insmod?) dsm | Perhaps iptables or your kernel needs to be upgraded. dsm | ❯ ERROR: The 'ip_tables' kernel module is not loaded. Try this command: sudo modprobe ip_tables iptable_nat dsm | ❯ Notice: port mapping will not work without "USER_PORTS" now. dsm | ❯ Warning: an error occured, falling back to user-mode networking! dsm | ❯ Booting Virtual DSM using QEMU v9.2.2... dsm | [ 0.000000] Initializing cgroup subsys cpuset dsm | [ 0.000000] Initializing cgroup subsys cpu dsm | [ 0.000000] Initializing cgroup subsys cpuacct dsm | [ 0.000000] Linux version 4.4.180+ (root@build3) (gcc version 7.5.0 (GCC) ) #42218 SMP Fri May 5 00:04:19 CST 2023 dsm | [ 0.000000] Command line: root=/dev/sda1 ihd_num=0 netif_num=0 syno_hw_version=VirtualDSM vender_format_version=2 macs=0064a82cc643,0064a82cc644,0064a82cc645,0064a82cc646 dsm | [ 0.000000] KERNEL supported cpus: dsm | [ 0.000000] Intel GenuineIntel dsm | [ 0.000000] AMD AuthenticAMD dsm | [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 dsm | [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' dsm | [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' dsm | [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' dsm | [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. dsm | [ 0.000000] e820: BIOS-provided physical RAM map: dsm | [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable dsm | [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved dsm | [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved dsm | [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffd6fff] usable dsm | [ 0.000000] BIOS-e820: [mem 0x000000003ffd7000-0x000000003fffffff] reserved dsm | [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved dsm | [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved dsm | [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved dsm | [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved dsm | [ 0.000000] NX (Execute Disable) protection: active dsm | [ 0.000000] extended physical RAM map: dsm | [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable dsm | [ 0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved dsm | [ 0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved dsm | [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000001df1cb7] usable dsm | [ 0.000000] reserve setup_data: [mem 0x0000000001df1cb8-0x0000000001df1cc7] usable dsm | [ 0.000000] reserve setup_data: [mem 0x0000000001df1cc8-0x000000003ffd6fff] usable dsm | [ 0.000000] reserve setup_data: [mem 0x000000003ffd7000-0x000000003fffffff] reserved dsm | [ 0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved dsm | [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved dsm | [ 0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved dsm | [ 0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved dsm | [ 0.000000] SMBIOS 2.8 present. dsm | [ 0.000000] Hypervisor detected: KVM dsm | [ 0.000000] Kernel/User page tables isolation: disabled dsm | [ 0.000000] e820: last_pfn = 0x3ffd7 max_arch_pfn = 0x400000000 dsm | [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC dsm | [ 0.000000] found SMP MP-table at [mem 0x000f5450-0x000f545f] mapped at [ffff8800000f5450] dsm | [ 0.000000] Using GB pages for direct mapping dsm | [ 0.000000] RAMDISK: [mem 0x3faa2000-0x3ffc6fff] dsm | [ 0.000000] ACPI: Early table checksum verification disabled dsm | [ 0.000000] ACPI: RSDP 0x00000000000F5290 000014 (v00 BOCHS ) dsm | [ 0.000000] ACPI: RSDT 0x000000003FFE224E 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001) dsm | [ 0.000000] ACPI: FACP 0x000000003FFE207E 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) dsm | [ 0.000000] ACPI: DSDT 0x000000003FFE0040 00203E (v01 BOCHS BXPC 00000001 BXPC 00000001) dsm | [ 0.000000] ACPI: FACS 0x000000003FFE0000 000040 dsm | [ 0.000000] ACPI: APIC 0x000000003FFE2172 000078 (v03 BOCHS BXPC 00000001 BXPC 00000001) dsm | [ 0.000000] ACPI: MCFG 0x000000003FFE21EA 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) dsm | [ 0.000000] ACPI: WAET 0x000000003FFE2226 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) dsm | [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 dsm | [ 0.000000] kvm-clock: cpu 0, msr 0:3ffd5001, primary cpu clock dsm | [ 0.000000] kvm-clock: using sched offset of 3592942335 cycles dsm | [ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns dsm | [ 0.000000] Zone ranges: dsm | [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] dsm | [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000003ffd6fff] dsm | [ 0.000000] Normal empty dsm | [ 0.000000] Movable zone start for each node dsm | [ 0.000000] Early memory node ranges dsm | [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] dsm | [ 0.000000] node 0: [mem 0x0000000000100000-0x000000003ffd6fff] dsm | [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffd6fff] dsm | [ 0.000000] ACPI: PM-Timer IO Port: 0x608 dsm | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) dsm | [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 dsm | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) dsm | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) dsm | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) dsm | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) dsm | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) dsm | [ 0.000000] Using ACPI (MADT) for SMP configuration information dsm | [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs dsm | [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] dsm | [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] dsm | [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] dsm | [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] dsm | [ 0.000000] PM: Registered nosave memory: [mem 0x01df1000-0x01df1fff] dsm | [ 0.000000] PM: Registered nosave memory: [mem 0x01df1000-0x01df1fff] dsm | [ 0.000000] e820: [mem 0x40000000-0xafffffff] available for PCI devices dsm | [ 0.000000] Booting paravirtualized kernel on KVM dsm | [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns dsm | [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:1 nr_node_ids:1 dsm | [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88003f800000 s95448 r8192 d31528 u2097152 dsm | [ 0.000000] KVM setup async PF for cpu 0 dsm | [ 0.000000] kvm-stealtime: cpu 0, msr 3f80f180 dsm | [ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes) dsm | [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257887 dsm | [ 0.000000] Kernel command line: root=/dev/sda1 ihd_num=0 netif_num=0 syno_hw_version=VirtualDSM vender_format_version=2 macs=0064a82cc643,0064a82cc644,0064a82cc645,0064a82cc646 dsm | [ 0.000000] Internal HD num: 0 dsm | [ 0.000000] Internal netif num: 0 dsm | [ 0.000000] Synology Hardware Version: VirtualDSM dsm | [ 0.000000] Vender format version: 2 dsm | [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) dsm | [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) dsm | [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) dsm | [ 0.000000] Memory: 1012832K/1048020K available (5354K kernel code, 868K rwdata, 1672K rodata, 1004K init, 1556K bss, 35188K reserved, 0K cma-reserved) dsm | [ 0.000000] Hierarchical RCU implementation. dsm | [ 0.000000] Build-time adjustment of leaf fanout to 64. dsm | [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=1. dsm | [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1 dsm | [ 0.000000] NR_IRQS:8448 nr_irqs:256 16 dsm | [ 0.000000] Console: colour dummy device 80x25 dsm | [ 0.000000] console [ttyS0] enabled dsm | [ 0.000000] tsc: Detected 2893.298 MHz processor dsm | [ 0.180243] Calibrating delay loop (skipped) preset value.. 5786.59 BogoMIPS (lpj=2893298) dsm | [ 0.182373] pid_max: default: 32768 minimum: 301 dsm | [ 0.183554] ACPI: Core revision 20150930 dsm | [ 0.185128] ACPI: 1 ACPI AML tables successfully acquired and loaded dsm | [ 0.186761] Security Framework initialized dsm | [ 0.187783] AppArmor: AppArmor initialized dsm | [ 0.188798] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) dsm | [ 0.190406] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) dsm | [ 0.192327] Initializing cgroup subsys io dsm | [ 0.193344] Initializing cgroup subsys memory dsm | [ 0.194496] Initializing cgroup subsys devices dsm | [ 0.196084] Initializing cgroup subsys freezer dsm | [ 0.197238] CPU: Physical Processor ID: 0 dsm | [ 0.205006] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 dsm | [ 0.206308] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 dsm | [ 0.207694] Speculative Store Bypass: Vulnerable dsm | [ 0.223980] Freeing SMP alternatives memory: 24K dsm | [ 0.230486] x2apic enabled dsm | [ 0.231488] Switched APIC routing to physical x2apic. dsm | [ 0.233954] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 dsm | [ 0.235449] smpboot: CPU0: Intel(R) Core(TM) i3-4130T CPU @ 2.90GHz (family: 0x6, model: 0x3c, stepping: 0x3) dsm | [ 0.237946] Performance Events: 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. dsm | [ 0.245626] ... version: 2 dsm | [ 0.246605] ... bit width: 48 dsm | [ 0.247596] ... generic registers: 4 dsm | [ 0.248556] ... value mask: 0000ffffffffffff dsm | [ 0.249838] ... max period: 00007fffffffffff dsm | [ 0.251072] ... fixed-purpose events: 3 dsm | [ 0.252037] ... event mask: 000000070000000f dsm | [ 0.253291] KVM setup paravirtual spinlock dsm | [ 0.254481] x86: Booted up 1 node, 1 CPUs dsm | [ 0.255519] smpboot: Total of 1 processors activated (5786.59 BogoMIPS) dsm | [ 0.257481] devtmpfs: initialized dsm | [ 0.258523] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns dsm | [ 0.260908] futex hash table entries: 256 (order: 2, 16384 bytes) dsm | [ 0.262634] NET: Registered protocol family 16 dsm | [ 0.263889] cpuidle: using governor ladder dsm | [ 0.264907] cpuidle: using governor menu dsm | [ 0.265918] ACPI: bus type PCI registered dsm | [ 0.267025] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 dsm | [ 0.268710] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) dsm | [ 0.270931] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 dsm | [ 0.272649] PCI: Using configuration type 1 for base access dsm | [ 0.274391] perf_event_intel: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off dsm | [ 0.278454] ACPI: Added _OSI(Module Device) dsm | [ 0.279587] ACPI: Added _OSI(Processor Device) dsm | [ 0.280665] ACPI: Added _OSI(3.0 _SCP Extensions) dsm | [ 0.281809] ACPI: Added _OSI(Processor Aggregator Device) dsm | [ 0.285444] ACPI: Interpreter enabled dsm | [ 0.286487] ACPI: (supports S0 S4 S5) dsm | [ 0.287376] ACPI: Using IOAPIC for interrupt routing dsm | [ 0.288582] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug dsm | [ 0.292164] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) dsm | [ 0.293658] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] dsm | [ 0.295821] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug] dsm | [ 0.297578] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] dsm | [ 0.299407] PCI host bridge to bus 0000:00 dsm | [ 0.300460] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] dsm | [ 0.302134] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] dsm | [ 0.303856] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] dsm | [ 0.305667] pci_bus 0000:00: root bus resource [mem 0x40000000-0xafffffff window] dsm | [ 0.307429] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] dsm | [ 0.309220] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] dsm | [ 0.311035] pci_bus 0000:00: root bus resource [bus 00-ff] dsm | [ 0.366399] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO dsm | [ 0.376244] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) dsm | [ 0.377817] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) dsm | [ 0.379341] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) dsm | [ 0.380853] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) dsm | [ 0.382385] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *10 11) dsm | [ 0.383933] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *10 11) dsm | [ 0.385631] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 *11) dsm | [ 0.387210] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 *11) dsm | [ 0.388685] ACPI: PCI Interrupt Link [GSIA] (IRQs *16) dsm | [ 0.390034] ACPI: PCI Interrupt Link [GSIB] (IRQs *17) dsm | [ 0.391303] ACPI: PCI Interrupt Link [GSIC] (IRQs *18) dsm | [ 0.392603] ACPI: PCI Interrupt Link [GSID] (IRQs *19) dsm | [ 0.393931] ACPI: PCI Interrupt Link [GSIE] (IRQs *20) dsm | [ 0.395235] ACPI: PCI Interrupt Link [GSIF] (IRQs *21) dsm | [ 0.396534] ACPI: PCI Interrupt Link [GSIG] (IRQs *22) dsm | [ 0.397829] ACPI: PCI Interrupt Link [GSIH] (IRQs *23) dsm | [ 0.399248] ACPI: Enabled 2 GPEs in block 00 to 3F dsm | [ 0.401170] vgaarb: loaded dsm | [ 0.401921] SCSI subsystem initialized dsm | [ 0.402938] pps_core: LinuxPPS API ver. 1 registered dsm | [ 0.404091] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> dsm | [ 0.406145] PTP clock support registered dsm | [ 0.407491] PCI: Using ACPI for IRQ routing dsm | [ 0.471327] clocksource: Switched to clocksource kvm-clock dsm | [ 0.478200] AppArmor: AppArmor Filesystem Enabled dsm | [ 0.479404] pnp: PnP ACPI init dsm | [ 0.480329] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved dsm | [ 0.482210] pnp: PnP ACPI: found 5 devices dsm | [ 0.489201] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns dsm | [ 0.491344] NET: Registered protocol family 2 dsm | [ 0.492526] TCP established hash table entries: 8192 (order: 4, 65536 bytes) dsm | [ 0.494210] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) dsm | [ 0.495758] TCP: Hash tables configured (established 8192 bind 8192) dsm | [ 0.497291] UDP hash table entries: 512 (order: 2, 16384 bytes) dsm | [ 0.498715] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) dsm | [ 0.500272] NET: Registered protocol family 1 dsm | [ 0.596287] Trying to unpack rootfs image as initramfs... dsm | [ 1.419053] decompress cpio completed and skip redundant lzma dsm | [ 1.421031] Freeing initrd memory: 5268K dsm | [ 1.422088] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 10737418240 ms ovfl timer dsm | [ 1.424164] hw unit of domain pp0-core 2^-0 Joules dsm | [ 1.425284] hw unit of domain package 2^-0 Joules dsm | [ 1.426404] hw unit of domain dram 2^-0 Joules dsm | [ 1.427460] hw unit of domain pp1-gpu 2^-0 Joules dsm | [ 1.430469] audit: initializing netlink subsys (disabled) dsm | [ 1.431815] audit: type=2000 audit(1743087074.691:1): initialized dsm | [ 1.433410] Initialise system trusted keyring dsm | [ 1.471885] VFS: Disk quotas dquot_6.6.0 dsm | [ 1.472871] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) dsm | [ 1.474689] Key type asymmetric registered dsm | [ 1.475696] Asymmetric key parser 'x509' registered dsm | [ 1.476829] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) dsm | [ 1.478527] io scheduler noop registered (default) dsm | [ 1.479731] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 dsm | [ 1.481026] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 dsm | [ 2.341841] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled dsm | [ 2.367713] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A dsm | [ 2.430322] tsc: Refined TSC clocksource calibration: 2893.294 MHz dsm | [ 2.431780] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b483f0c36, max_idle_ns: 440795226749 ns dsm | [ 2.575361] brd: module loaded dsm | [ 2.576296] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized dsm | [ 2.577753] Loading iSCSI transport class v2.0-870. dsm | [ 2.610178] rdac: device handler registered dsm | [ 2.639303] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16 dsm | [ 2.641326] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode dsm | [ 2.643270] ahci 0000:00:1f.2: flags: 64bit ncq only dsm | [ 2.777348] scsi host0: ahci dsm | [ 2.779063] scsi host1: ahci dsm | [ 2.781526] scsi host2: ahci dsm | [ 2.787655] scsi host3: ahci dsm | [ 2.792353] scsi host4: ahci dsm | [ 2.796947] scsi host5: ahci dsm | [ 2.797798] ata1: SATA max UDMA/133 abar m4096@0xfebff000 port 0xfebff100 irq 24 dsm | [ 2.799522] ata2: SATA max UDMA/133 abar m4096@0xfebff000 port 0xfebff180 irq 24 dsm | [ 2.801235] ata3: SATA max UDMA/133 abar m4096@0xfebff000 port 0xfebff200 irq 24 dsm | [ 2.802957] ata4: SATA max UDMA/133 abar m4096@0xfebff000 port 0xfebff280 irq 24 dsm | [ 2.804607] ata5: SATA max UDMA/133 abar m4096@0xfebff000 port 0xfebff300 irq 24 dsm | [ 2.806349] ata6: SATA max UDMA/133 abar m4096@0xfebff000 port 0xfebff380 irq 24 dsm | [ 2.808221] rtc_cmos 00:03: RTC can wake from S4 dsm | [ 2.832049] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 dsm | [ 2.833665] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram dsm | [ 2.835218] i2c /dev entries driver dsm | [ 2.836161] md: raid1 personality registered for level 1 dsm | [ 2.837545] NET: Registered protocol family 17 dsm | [ 2.838622] Key type dns_resolver registered dsm | [ 2.851373] mce: Using 10 MCE banks dsm | [ 2.852476] registered taskstats version 1 dsm | [ 2.853495] Loading compiled-in untrusted X.509 certificates dsm | [ 2.854787] Loading compiled-in X.509 certificates dsm | [ 2.855951] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329' dsm | [ 2.868591] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089' dsm | [ 2.871017] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28' dsm | [ 2.873616] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5' dsm | [ 2.875897] page_owner is disabled dsm | [ 2.876677] AppArmor: AppArmor sha1 policy hashing enabled dsm | [ 2.878661] rtc_cmos 00:03: setting system clock to 2025-03-27 14:51:15 UTC (1743087075) dsm | [ 3.114407] ata1: SATA link down (SStatus 0 SControl 300) dsm | [ 3.115875] ata2: SATA link down (SStatus 0 SControl 300) dsm | [ 3.117374] ata3: SATA link down (SStatus 0 SControl 300) dsm | [ 3.119374] ata4: SATA link down (SStatus 0 SControl 300) dsm | [ 3.121374] ata5: SATA link down (SStatus 0 SControl 300) dsm | [ 3.122859] ata6: SATA link down (SStatus 0 SControl 300) dsm | [ 3.125216] Freeing unused kernel memory: 1004K dsm | [ 3.126354] Write protecting the kernel read-only data: 8192k dsm | [ 3.127948] Freeing unused kernel memory: 780K dsm | [ 3.129713] Freeing unused kernel memory: 376K dsm | START /linuxrc.syno dsm | START /linuxrc.syno.impl dsm | Insert basic USB modules... dsm | :: Loading module usb-common ... [ OK ] dsm | :: Loading module usbcore[ 3.188810] ACPI: bus type USB registered dsm | [ 3.189875] usbcore: registered new interface driver usbfs dsm | [ 3.191198] usbcore: registered new interface driver hub dsm | [ 3.192536] usbcore: registered new interface driver ethub dsm | [ 3.193877] usbcore: registered new device driver usb dsm | ... [ OK ] dsm | :: Loading module ehci-hcd[ 3.217573] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver dsm | ... [ OK ] dsm | :: Loading module ehci-pci[ 3.228606] ehci-pci: EHCI PCI platform driver dsm | ... [ OK ] dsm | :: Loading module uhci-hcd[ 3.242270] uhci_hcd: USB Universal Host Controller Interface driver dsm | ... [ OK ] dsm | :: Loading module xhci-hcd ... [ OK ] dsm | Insert net driver(Mindspeed only)... dsm | [ 3.276124] kvmx64_synobios: loading out-of-tree module taints kernel. dsm | [ 3.277698] kvmx64_synobios: module license 'Synology Inc.' taints kernel. dsm | [ 3.279349] Disabling lock debugging due to kernel taint dsm | [ 3.283585] synobios ioctl TCGETS /dev/ttyS1 failed dsm | [ 3.284804] synobios unable to set termios of /dev/ttyS1 dsm | [ 3.286334] 2025-3-27 14:51:15 UTC dsm | [ 3.287144] synobios: load, major number 201 dsm | [ 3.288165] Brand: Synology dsm | [ 3.288844] Model: VirtualDSM dsm | [ 3.289577] set group disks wakeup number to 4, spinup time deno 7 dsm | [ 3.291058] synobios cpu_arch proc entry initialized dsm | [ 3.292268] synobios crypto_hw proc entry initialized dsm | [ 3.293461] synobios syno_platform proc entry initialized dsm | Starting /usr/syno/bin/synocfgen... dsm | /usr/syno/bin/synocfgen returns 0 dsm | [ 3.308196] Module [kvmx64_synobios] is removed. dsm | [ 3.309379] synobios: unload dsm | [ 3.317873] ACPI: PCI Interrupt Link [GSIF] enabled at IRQ 21 dsm | [ 3.320601] ACPI: PCI Interrupt Link [GSIH] enabled at IRQ 23 dsm | [ 3.323337] ACPI: PCI Interrupt Link [GSIE] enabled at IRQ 20 dsm | [ 3.325975] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22 dsm | [ 3.372828] scsi host6: Virtio SCSI HBA dsm | [ 3.376670] scsi 6:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 dsm | [ 3.381582] sd 6:0:0:0: [synoboot] 225280 512-byte logical blocks: (115 MB/110 MiB) dsm | [ 3.383954] sd 6:0:0:0: [synoboot] Write Protect is off dsm | [ 3.386091] sd 6:0:0:0: [synoboot] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA dsm | [ 3.399608] synoboot: synoboot1 synoboot2 dsm | [ 3.405839] sd 6:0:0:0: [synoboot] Attached SCSI disk dsm | [ 4.907235] scsi host7: Virtio SCSI HBA dsm | [ 4.909863] scsi 7:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 dsm | [ 4.913055] sd 7:0:0:0: [sda] 9676832 512-byte logical blocks: (4.95 GB/4.61 GiB) dsm | [ 4.915064] sd 7:0:0:0: [sda] Write Protect is off dsm | [ 4.917138] sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA dsm | [ 4.932521] sda: sda1 sda2 dsm | [ 4.937543] sd 7:0:0:0: [sda] Attached SCSI disk dsm | [ 6.443218] scsi host8: Virtio SCSI HBA dsm | [ 6.445839] scsi 8:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 dsm | [ 6.448956] sd 8:0:0:0: [sdb] 33554432 512-byte logical blocks: (17.2 GB/16.0 GiB) dsm | [ 6.451095] sd 8:0:0:0: [sdb] Write Protect is off dsm | [ 6.453104] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA dsm | [ 6.471804] sdb: sdb1 dsm | [ 6.478427] sd 8:0:0:0: [sdb] Attached SCSI disk dsm | [ 7.994662] random: nonblocking pool is initialized dsm | Partition Version=8 dsm | /sbin/e2fsck exists, checking /dev/sda1... dsm | e2fsck 1.44.1 (24-Mar-2018) dsm | /dev/sda1 has unsupported feature(s): FEATURE_C12 dsm | e2fsck: Get a newer version of e2fsck! dsm | /sbin/e2fsck -yvf r[ 8.043315] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities dsm | eturns 12 dsm | Mounting /dev/sda1 /tmpRoot dsm | [ 8.052937] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) dsm | ------------upgrade dsm | Begin upgrade procedure dsm | e2fsck 1.44.1 (24-Mar-2018) dsm | /sbin/e2fsck: No such file or directory while trying to open /dev/sda3 dsm | Mount data partition: /dev/sda3 -> /tmpData dsm | mount: mounting /dev/sda3 on /tmpData failed: No such file or directory dsm | Mount data partition failed dsm | ============upgrade dsm | ------------bootup-smallupdate dsm | mount: mounting /dev/sda3 on /tmpRoot/datamnt failed: No such file or directory dsm | Try bootup smallupdate dsm | UPGRADE_BOOTUP_SMALLUPDATE dsm | No patch exist. Skip Packed Bootup SmallUpdate dsm | Sparse files don't exist. Skip Sparse Bootup SmallUpdate dsm | Finished synoupgrade --bootup-smallupdate dsm | umount: can't unmount /tmpRoot/datamnt: Invalid argument dsm | ============bootup-smallupdate dsm | Root check fail, then do selfcheck dsm | Copyright (c) 2003-2021 Synology Inc. All rights reserved. dsm | dsm | Check Success dsm | Selfcheck pass, enter DSM. dsm | Wait 2 seconds for synology manufactory device dsm | Thu Mar 27 14:51:33 UTC 2025 dsm | /dev/sda1 /tmpRoot ext4 rw,relatime,data=ordered 0 0 dsm | none /sys/kernel/debug debugfs rw,relatime 0 0 dsm | root: Start backing up logs in junior mode dsm | [ 21.732516] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities dsm | [ 21.737709] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) dsm | umount: /etc/mtab: No such file or directory linuxrc.syno executed successfully. dsm | Post init dsm | [ 21.797584] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities dsm | [ 21.802513] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: barrier=1 dsm | [ 21.906229] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) dsm | [ 21.910551] systemd[1]: Detected virtualization kvm. dsm | [ 21.911776] systemd[1]: Detected architecture x86-64. dsm | dsm | Welcome to Linux! dsm | dsm | [ 21.915647] systemd[1]: Set hostname to <M73>. dsm | [ 22.204366] systemd[1]: Cannot add dependency job for unit synoperfeventd.service, ignoring: Unit synoperfeventd.service is masked. dsm | [ 22.207449] systemd[1]: Cannot add dependency job for unit SynoLedBrightness.service, ignoring: Unit SynoLedBrightness.service is masked. dsm | [ 22.210386] systemd[1]: Cannot add dependency job for unit pkg-install-low-priority-builtin.service, ignoring: Unit pkg-install-low-priority-builtin.service failed to load: No such file or directory. dsm | [ 22.214455] systemd[1]: Cannot add dependency job for unit pkg-install-high-priority-builtin.service, ignoring: Unit pkg-install-high-priority-builtin.service failed to load: No such file or directory. dsm | [ OK ] Created slice Root Slice. dsm | [ 22.221027] systemd[1]: Created slice Root Slice. dsm | [ 22.222182] systemd[1]: Starting Root Slice. dsm | [ OK ] Created slice SNMP. dsm | [ 22.224492] systemd[1]: Created slice SNMP. dsm | [ 22.225531] systemd[1]: Starting SNMP. dsm | [ OK ] Created slice Synology DSM Storage Service. dsm | [ 22.228044] systemd[1]: Created slice Synology DSM Storage Service. dsm | [ 22.229547] systemd[1]: Starting Synology DSM Storage Service. dsm | [ OK ] Created slice Synology DSM desktop service. dsm | [ 22.232621] systemd[1]: Created slice Synology DSM desktop service. dsm | [ 22.234142] systemd[1]: Starting Synology DSM desktop service. dsm | [ OK ] Created slice Synology Cache Advisor. dsm | [ 22.237050] systemd[1]: Created slice Synology Cache Advisor. dsm | [ 22.238467] systemd[1]: Starting Synology Cache Advisor. dsm | [ OK ] Listening on Journal Audit Socket. dsm | [ 22.241290] systemd[1]: Listening on Journal Audit Socket. dsm | [ 22.242635] systemd[1]: Starting Journal Audit Socket. dsm | [ OK ] Created slice RAID Resync Process. ...ing Resync, Repair and Reshape.. dsm | [ 22.246020] systemd[1]: Created slice RAID Resync Process. Including Resync, Repair and Reshape.. dsm | [ 22.248148] systemd[1]: Starting RAID Resync Process. Including Resync, Repair and Reshape.. dsm | [ OK ] Listening on udev Kernel Socket. dsm | [ 22.251581] systemd[1]: Listening on udev Kernel Socket. dsm | [ 22.252908] systemd[1]: Starting udev Kernel Socket. dsm | [ OK ] Reached target Paths. dsm | [ 22.255385] systemd[1]: Reached target Paths. dsm | [ 22.256506] systemd[1]: Starting Paths. dsm | [ OK ] Reached target Swap. dsm | [ 22.258617] systemd[1]: Reached target Swap. dsm | [ 22.259667] systemd[1]: Starting Swap. dsm | [ OK ] Created slice scemd. dsm | [ 22.261848] systemd[1]: Created slice scemd. dsm | [ 22.262899] systemd[1]: Starting scemd. dsm | [ INFO ] dev-hvc0.device is not active. dsm | [DEPEND] Dependency failed for agetty for console output(for vDSM). dsm | [ 22.267104] systemd[1]: Dependency failed for agetty for console output(for vDSM). dsm | [ 22.268944] systemd[1]: Job vdsm_dummy_tty.service/start failed with result 'dependency'. dsm | [ OK ] Created slice System Slice. dsm | [ 22.272298] systemd[1]: Created slice System Slice. dsm | [ 22.273514] systemd[1]: Starting System Slice. dsm | [ OK ] Created slice User and Session Slice. dsm | [ 22.276258] systemd[1]: Created slice User and Session Slice. dsm | [ 22.277697] systemd[1]: Starting User and Session Slice. dsm | [ OK ] Created slice OAuthService's slice. dsm | [ 22.280587] systemd[1]: Created slice OAuthService's slice. dsm | [ 22.281990] systemd[1]: Starting OAuthService's slice. dsm | [ OK ] Listening on Journal Socket. dsm | [ 22.284638] systemd[1]: Listening on Journal Socket. dsm | [ 22.285917] systemd[1]: Starting Journal Socket. dsm | [ 22.287526] systemd[1]: Starting Set boot sequence config... dsm | Starting Set boot sequence config... dsm | [ 22.290490] systemd[1]: Starting Load ntb_brd module... dsm | Starting Load ntb_brd module... dsm | [ 22.294730] systemd[1]: Starting check integrity of rd.gz decompression... dsm | Starting check integrity of rd.gz decompression... dsm | [ 22.301677] systemd[1]: Starting Journal Socket (/dev/log). dsm | [ 22.305738] systemd[1]: Starting Set time zone information to kernel... dsm | Starting Set time zone information to kernel... dsm | [ 22.315344] systemd[1]: Starting Synology Task Scheduler Init... dsm | Starting Synology Task Scheduler Init... dsm | [ OK ] Created slice Package Center Slice. dsm | [ 22.324506] systemd[1]: Created slice Package Center Slice. dsm | [ 22.326061] systemd[1]: Starting Package Center Slice. dsm | [ 22.329923] systemd[1]: Mounting Temporary Directory... dsm | Mounting Temporary Directory... dsm | [ 22.333113] systemd[1]: Starting unbind USB device... dsm | Starting unbind USB device... dsm | [ 22.337738] systemd[1]: Starting Link coredump path to volume if possible... dsm | Starting Link coredump path to volume if possible... dsm | [ OK ] Created slice FileStation's slice. dsm | [ 22.347618] systemd[1]: Created slice FileStation's slice. dsm | [ 22.349350] systemd[1]: Starting FileStation's slice. dsm | [ OK ] Created slice Shared Folder Sync. dsm | [ 22.352950] systemd[1]: Created slice Shared Folder Sync. dsm | [ 22.354441] systemd[1]: Starting Shared Folder Sync. dsm | [ OK ] Created slice Python2's slice. dsm | [ 22.357327] systemd[1]: Created slice Python2's slice. dsm | [ 22.358708] systemd[1]: Starting Python2's slice. dsm | [ OK ] Created slice system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice. dsm | [ 22.362171] systemd[1]: Created slice system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice. dsm | [ 22.364290] systemd[1]: Starting system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice. dsm | [ OK ] Created slice Task Scheduler Group. dsm | [ 22.367965] systemd[1]: Created slice Task Scheduler Group. dsm | [ 22.369446] systemd[1]: Starting Task Scheduler Group. dsm | [ OK ] Reached target Timers. dsm | [ 22.372158] systemd[1]: Reached target Timers. dsm | [ 22.373382] systemd[1]: Starting Timers. dsm | [ 22.375045] systemd[1]: Starting Set hostname... dsm | Starting Set hostname... dsm | [ 22.377873] systemd[1]: Starting Disabling fan checking flag ...... dsm | Starting Disabling fan checking flag ...... dsm | [ OK ] Created slice system-serial\x2dgetty.slice. dsm | [ 22.385481] systemd[1]: Created slice system-serial\x2dgetty.slice. dsm | [ 22.387704] systemd[1]: Starting system-serial\x2dgetty.slice. dsm | [ OK ] Created slice BTRFS Space Reclaim. dsm | [ 22.390901] systemd[1]: Created slice BTRFS Space Reclaim. dsm | [ 22.392358] systemd[1]: Starting BTRFS Space Reclaim. dsm | [ OK ] Created slice Synology Index slice (WAT). dsm | [ 22.395352] systemd[1]: Created slice Synology Index slice (WAT). dsm | [ 22.396945] systemd[1]: Starting Synology Index slice (WAT). dsm | [ OK ] Created slice VirtualDSM daemon slice. dsm | [ 22.400037] systemd[1]: Created slice VirtualDSM daemon slice. dsm | [ 22.401526] systemd[1]: Starting VirtualDSM daemon slice. dsm | [ OK ] Created slice SSDP service. dsm | [ 22.404415] systemd[1]: Created slice SSDP service. dsm | [ 22.405696] systemd[1]: Starting SSDP service. dsm | [ 22.407330] systemd[1]: Mounting Debug File System... dsm | Mounting Debug File System... dsm | [ 22.412617] systemd[1]: Starting Load Kernel Modules... dsm | Starting Load Kernel Modules... dsm | [ OK ] Created slice SMBService's slice. dsm | [ 22.418371] systemd[1]: Created slice SMBService's slice. dsm | [ 22.419937] systemd[1]: Starting SMBService's slice. dsm | [ OK ] Reached target Slices. dsm | [ 22.422982] systemd[1]: Reached target Slices. dsm | [ 22.424226] systemd[1]: Starting Slices. dsm | [ OK ] Created slice SynoFinder's slice. dsm | [ 22.427375] systemd[1]: Created slice SynoFinder's slice. dsm | [ 22.428780] systemd[1]: Starting SynoFinder's slice. dsm | [ OK ] Created slice ScsiTarget's slice. dsm | [ 22.431678] systemd[1]: Created slice ScsiTarget's slice. dsm | [ 22.433228] systemd[1]: Starting ScsiTarget's slice. dsm | [ OK ] Created slice Synology DSM internal service. dsm | [ 22.437164] systemd[1]: Created slice Synology DSM internal service. dsm | [ 22.438956] systemd[1]: Starting Synology DSM internal service. dsm | [ 22.441873] systemd[1]: Starting Synology swap... dsm | Starting Synology swap... dsm | [ OK ] Created slice Synology Swap Works. dsm | [ 22.448408] systemd[1]: Created slice Synology Swap Works. dsm | [ 22.451838] systemd[1]: Starting Synology Swap Works. dsm | [ OK ] Created slice Synology Flashcache. dsm | [ 22.456091] systemd[1]: Created slice Synology Flashcache. dsm | [ 22.460367] systemd[1]: Starting Synology Flashcache. dsm | [ OK ] Created slice dsm6-ui-compatible's slice. dsm | [ 22.465113] systemd[1]: Created slice dsm6-ui-compatible's slice. dsm | [ 22.469745] systemd[1]: Starting dsm6-ui-compatible's slice. dsm | [ OK ] Listening on udev Control Socket. dsm | [ 22.474192] systemd[1]: Listening on udev Control Socket. dsm | [ 22.475845] systemd[1]: Starting udev Control Socket. dsm | [ OK ] Created slice synobackup daemon slice. dsm | [ 22.481196] systemd[1]: Created slice synobackup daemon slice. dsm | [ 22.483465] systemd[1]: Starting synobackup daemon slice. dsm | [ OK ] Created slice BTRFS Optimization. dsm | [ 22.487752] systemd[1]: Created slice BTRFS Optimization. dsm | [ 22.489867] systemd[1]: Starting BTRFS Optimization. dsm | [ OK ] Created slice SecureSignIn's slice. dsm | [ 22.497591] systemd[1]: Created slice SecureSignIn's slice. dsm | [ 22.499039] systemd[1]: Starting SecureSignIn's slice. dsm | [ OK ] Mounted Debug File System. dsm | [ 22.502701] systemd[1]: Mounted Debug File System. dsm | [ OK ] Mounted Temporary Directory. dsm | [ 22.505700] systemd[1]: Mounted Temporary Directory. dsm | [ OK ] Started Set boot sequence config. dsm | [ 22.508627] systemd[1]: Started Set boot sequence config. dsm | [ OK ] Started Load ntb_brd module. dsm | [ 22.517857] NET: Registered protocol family 10 dsm | [ 22.520941] systemd[1]: Started Load ntb_brd module. dsm | [ OK ] Started check integrity of rd.gz decompression. dsm | [ 22.524931] systemd[1]: Started check integrity of rd.gz decompression. dsm | [ OK ] Listening on Journal Socket (/dev/log). dsm | [ 22.530104] sit: IPv6 over IPv4 tunneling driver dsm | [ 22.532936] systemd[1]: Listening on Journal Socket (/dev/log). dsm | [ OK ] Started Set time zone information to kernel. dsm | [ 22.541471] zram: Added device: zram0 dsm | [ 22.543768] systemd[1]: Started Set time zone information to kernel. dsm | [ 22.549124] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com dsm | [ OK ] Started Synology Task Scheduler Init. dsm | [ 22.555900] systemd[1]: Started Synology Task Scheduler Init. dsm | [ OK ] Started unbind USB device. dsm | [ 22.562948] systemd[1]: Started unbind USB device. dsm | [ 22.564946] sd 6:0:0:0: Attached scsi generic sg0 type 0 dsm | [ 22.567288] sd 7:0:0:0: Attached scsi generic sg1 type 0 dsm | [ OK ] Started Link coredump path to volume if possible. dsm | [ 22.570922] sd 8:0:0:0: Attached scsi generic sg2 type 0 dsm | [ 22.572569] systemd[1]: Started Link coredump path to volume if possible. dsm | [ OK ] Started Set hostname. dsm | [ 22.576808] systemd[1]: Started Set hostname. dsm | [ OK ] Started Disabling fan checking flag .... dsm | [ 22.582524] systemd[1]: Started Disabling fan checking flag .... dsm | [ OK ] Reached target Sockets. dsm | [ 22.586978] i40evf: Intel(R) 40-10 Gigabit Virtual Function Network Driver - version 3.6.15 dsm | [ 22.589035] Copyright(c) 2013 - 2018 Intel Corporation. dsm | [ 22.590395] systemd[1]: Reached target Sockets. dsm | [ 22.591599] systemd[1]: Starting Sockets. dsm | [ 22.594184] systemd[1]: Starting Journal Service... dsm | [ 22.596357] Adding 2097148k swap on /dev/sda2. Priority:-1 extents:1 across:2097148k SS dsm | [ 22.598814] zram0: detected capacity change from 0 to 627048448 dsm | [ 22.600542] igbvf: Intel(R) Gigabit Virtual Function Driver - 2.3.8.2 dsm | [ 22.602029] igbvf: Copyright (c) 1999-2015 Intel Corporation. dsm | Starting Journal Service... dsm | [ OK ] Reached target Local File Systems. dsm | [ 22.609059] systemd[1]: Reached target Local File Systems. dsm | [ 22.611807] ixgbevf: Intel(R) 10GbE PCI Express Virtual Function Driver - version 4.5.3 dsm | [ 22.613735] Copyright(c) 1999 - 2019 Intel Corporation. dsm | [ 22.615580] Adding 612348k swap on /dev/zram0. Priority:1 extents:1 across:612348k SS dsm | [ 22.618403] systemd[1]: Starting Local File Systems. dsm | [ 22.628220] systemd[1]: Starting D-Bus System Message Bus... dsm | Starting D-Bus System Message Bus... dsm | [ 22.633454] usbcore: registered new interface driver usb-storage dsm | [ 22.636461] systemd[1]: Starting udev Coldplug all Devices... dsm | Starting udev Coldplug all Devices... dsm | [ 22.641520] systemd[1]: Starting D-Bus Session Message Bus... dsm | Starting D-Bus Session Message Bus... dsm | [ 22.650378] systemd[1]: Starting Set boot sequence config for temporary use... dsm | Starting Set boot sequence config for temporary use... dsm | [ 22.658613] systemd[1]: Starting Mount usb fs... dsm | Starting Mount usb fs... dsm | [ OK ] Started Journal Service. dsm | [ 22.671295] systemd[1]: Started Journal Service. dsm | [ OK ] Started Load Kernel Modules. dsm | [ OK ] Started Synology swap. dsm | [ OK ] Started Set boot sequence config for temporary use. dsm | Starting Load Kernel Modules in Kernel Project... dsm | Starting Apply etc.defaults/sysctl.conf kernel variable.... dsm | Mounting Configuration File System... dsm | Starting Load Fan Modules in Kernel Project... dsm | [ 22.720122] usbcore: registered new interface driver usblp dsm | Starting Adjust NIC sequence... dsm | Starting System Logger Daemon... dsm | Starting Flush Journal to Persistent Storage... dsm | [ 22.744930] usbcore: registered new interface driver usbhid dsm | [ 22.746292] usbhid: USB HID core driver dsm | [ OK ] Mounted Configuration File System. dsm | [ OK ] Started D-Bus Session Message Bus. dsm | [ OK ] Started Apply etc.defaults/sysctl.conf kernel variable.. dsm | [ 22.775988] synobios ioctl TCGETS /dev/ttyS1 failed dsm | [ 22.777229] synobios unable to set termios of /dev/ttyS1 dsm | [ 22.778803] 2025-3-27 14:51:34 UTC dsm | [ 22.779639] synobios: load, major number 201 dsm | [ 22.780671] Brand: Synology dsm | [ 22.781366] Model: VirtualDSM dsm | [ 22.782079] set group disks wakeup number to 4, spinup time deno 7 dsm | [ 22.783520] synobios cpu_arch proc entry initialized dsm | [ 22.784702] synobios crypto_hw proc entry initialized dsm | [ 22.785917] synobios syno_platform proc entry initialized dsm | [ OK ] Started Load Fan Modules in Kernel Project. dsm | [FAILED] Failed to start Adjust NIC sequence. dsm | See "systemctl status SynoInitEth.service" for details. dsm | [ OK ] Started D-Bus System Message Bus. dsm | [ OK ] Started udev Coldplug all Devices. dsm | [ 22.816169] systemd-journald[5148]: Received request to flush runtime journal from PID 1 dsm | [ OK ] Started Flush Journal to Persistent Storage. dsm | Starting Create Volatile Files and Directories... dsm | [ OK ] Started D-Bus System Message Bus. dsm | Starting Apply etc/sysctl.conf kernel variable.... dsm | [FAILED] Failed to start Mount usb fs. dsm | See "systemctl status syno-mount-usbfs.service" for details. dsm | [ OK ] Started Apply etc/sysctl.conf kernel variable.. dsm | Starting Apply Kernel Variables... dsm | [ OK ] Started Create Volatile Files and Directories. dsm | Starting synodsmnotify... dsm | [ OK ] Reached target Create SDK locks directory. dsm | Starting Check /etc/synoinfo.conf... dsm | Starting Check Synology user info consistency... dsm | Starting Check Synology group info consistency... dsm | [ OK ] Started Apply Kernel Variables. dsm | [ OK ] Started synodsmnotify. dsm | Starting Apply kernel variable kernel.sem at least 1024... dsm | Starting Apply kernel variable vm.min-free-kbytes... dsm | [ 22.916653] AVX2 version of gcm_enc/dec engaged. dsm | [ 22.917882] AES CTR mode by8 optimization enabled dsm | Starting Apply kernel variable kernel-shmmni at least 16384... dsm | [ OK ] Started Check /etc/synoinfo.conf. dsm | [ OK ] Started Apply kernel variable kernel-shmmni at least 16384. dsm | [ OK ] Started Apply kernel variable kernel.sem at least 1024. dsm | [ OK ] Started Check Synology user info consistency. dsm | [ OK ] Started Apply kernel variable vm.min-free-kbytes. dsm | [ OK ] Started Load Kernel Modules in Kernel Project. dsm | Starting Software Init Led for support led v2 models... dsm | Starting DSM Release Rolling Group ID... dsm | [ OK ] Started Check Synology group info consistency. dsm | [ OK ] Started DSM Release Rolling Group ID. dsm | [ OK ] Started Software Init Led for support led v2 models. dsm | [ OK ] Reached target User and Group Name Lookups. dsm | Starting move domain or ldap user p...der to domain or ldap folder.... dsm | Starting Prepare notification cache data... dsm | [ OK ] Reached target Synology local user and group ready. dsm | [ OK ] Started move domain or ldap user pr...older to domain or ldap folder.. dsm | [ OK ] Started Prepare notification cache data. dsm | [ OK ] Started System Logger Daemon. dsm | Starting Synology Log bootup start... dsm | [DEPEND] Dependency failed for rebuild local user and group db. dsm | Starting synodrnode... dsm | [ OK ] Reached target Synology root filesystem (rw) ready. dsm | Starting DSM Installation ID... dsm | [ OK ] Reached target Network (Pre). dsm | Starting Set arp ignore... dsm | Starting Synology Network Daemon... dsm | Starting Umount initrd... dsm | Starting Clean UPS config... dsm | Starting Set Eunit Sequence... dsm | Starting syno-cgi-keygen.service... dsm | Starting Load AppArmor profiles... dsm | Starting Synology Default TLS Profile... dsm | Starting DSM Boot Health Check... dsm | Starting Synology check locale... dsm | [ OK ] Started Synology Log bootup start. dsm | [ OK ] Started synodrnode. dsm | [ OK ] Started DSM Installation ID. dsm | [ OK ] Started Set arp ignore. dsm | [ OK ] Started Synology Network Daemon. dsm | [ OK ] Started Umount initrd. dsm | [ OK ] Started Clean UPS config. dsm | [ OK ] Started Set Eunit Sequence. dsm | [ OK ] Started Synology Default TLS Profile. dsm | [ OK ] Started Synology check locale. dsm | Starting udev Kernel Device Manager... dsm | Starting Wait for Synology Network to be Configured... dsm | Starting rc.network... dsm | [ OK ] Started syno-cgi-keygen.service. dsm | [ OK ] Started DSM Boot Health Check. dsm | [ OK ] Started udev Kernel Device Manager. dsm | [ OK ] Started Load AppArmor profiles. dsm | [ OK ] Reached target System Initialization. dsm | [ OK ] Started Serial Getty on ttyS0. dsm | Starting Serial Getty on ttyS0... dsm | [ OK ] Reached target Login Prompts. dsm | [ OK ] Started Synology token manager. dsm | Starting Synology token manager... dsm | [ OK ] Started Synology task manager. dsm | Starting Synology task manager... dsm | Starting bootup upgrade sha package... dsm | [ OK ] Started bootup upgrade sha package. dsm | [ OK ] Found device /dev/synoboot2. dsm | [ OK ] Reached target Synology synoboot2 done. dsm | [ OK ] Reached target Basic System. dsm | Starting Prepare SSDP configs... dsm | Starting Prepare snmp configs... dsm | [ OK ] Started synobackup daemon. dsm | Starting synobackup daemon... dsm | Starting synoindex check if there a...ny synoindex-related packages... dsm | Starting Samba Environment Setup Unit... dsm | Starting Control RC power... dsm | Starting Synology filesytem check on bootup... dsm | Starting always preprocess jobs before any package is started... dsm | Starting WD idle3 timer... dsm | Starting Synology Event Task Scheduler Init... dsm | Starting System Profile Tuning... dsm | [ 24.432227] exdisplay_handler not implemented dsm | Starting Log Rotate Daemon... dsm | Starting Synology Schedule Daemon... dsm | Starting Synology guest service daemon... dsm | Starting synoconfd daemon... dsm | [ OK ] Started Synology log accounting service. dsm | Starting Synology log accounting service... dsm | Starting Service for irq balance... dsm | Starting Login Service... dsm | Starting Synology guest command handle daemon... dsm | Starting Hibernation debug check... dsm | Starting Synology log notification service... dsm | Starting Synology firmware DLMC... dsm | [ OK ] Started Prepare SSDP configs. dsm | [ OK ] Started Prepare snmp configs. dsm | [FAILED] Failed to start synoindex check if ... any synoindex-related packages. dsm | See "systemctl status synoindex-checkpackage.service" for details. dsm | [DEPEND] Dependency failed for synoindex notifyd. dsm | [DEPEND] Dependency failed for synomkthumbd. dsm | [DEPEND] Dependency failed for synoindexd. dsm | [DEPEND] Dependency failed for synoindex mediad. dsm | [DEPEND] Dependency failed for synomkflvd. dsm | [DEPEND] Dependency failed for synoindex scand. dsm | [DEPEND] Dependency failed for synoindex plugind. dsm | [DEPEND] Dependency failed for synoindex workerd. dsm | [ OK ] Started Control RC power. dsm | [ OK ] Started Synology filesytem check on bootup. dsm | [ OK ] Started WD idle3 timer. dsm | [ OK ] Started Synology Event Task Scheduler Init. dsm | [ OK ] Started System Profile Tuning. dsm | [ OK ] Started Log Rotate Daemon. dsm | [ OK ] Started Synology Schedule Daemon. dsm | [ OK ] Started Synology guest service daemon. dsm | [ OK ] Started synoconfd daemon. dsm | [ OK ] Started Service for irq balance. dsm | [ OK ] Started Synology guest command handle daemon. dsm | [ OK ] Started Hibernation debug check. dsm | [ OK ] Started Synology firmware DLMC. dsm | [ OK ] Started Login Service. dsm | Starting Synology guest communication daemon... dsm | Starting Synology space service... dsm | [ OK ] Started Synology guest communication daemon. dsm | [ OK ] Stopped Synology Task Scheduler Vmtouch. dsm | [ OK ] Started Synology Task Scheduler Vmtouch. dsm | Starting Synology Task Scheduler Vmtouch... dsm | [ OK ] Started Samba Environment Setup Unit. dsm | [ OK ] Started always preprocess jobs before any package is started. dsm | [ OK ] Reached target Hook on root ready. dsm | Starting SMBService's service unit... dsm | Starting SecureSignIn's service unit... dsm | Starting Python2's service unit... dsm | [ OK ] Started Synology space service. dsm | Starting Synology virtual space service... dsm | [ OK ] Started Python2's service unit. dsm | [ OK ] Started Synology virtual space service. dsm | [ OK ] Reached target Synology storage pool. dsm | Starting Synology Building Tasks Restore for Storage Manager... dsm | Starting Synology filesystem check service... dsm | [ OK ] Started Synology filesystem check service. dsm | Starting Synology volume service... dsm | [ OK ] Started Synology log notification service. dsm | Stopping Synology Task Scheduler Vmtouch... dsm | [ OK ] Stopped Synology Task Scheduler Vmtouch. dsm | [ OK ] Started Synology Task Scheduler Vmtouch. dsm | Starting Synology Task Scheduler Vmtouch... dsm | [ 26.015262] raid6: sse2x1 gen() 10136 MB/s dsm | [ 26.033278] raid6: sse2x1 xor() 6060 MB/s dsm | [ 26.051274] raid6: sse2x2 gen() 10386 MB/s dsm | [ 26.069265] raid6: sse2x2 xor() 7433 MB/s dsm | [ 26.087261] raid6: sse2x4 gen() 14250 MB/s dsm | [ 26.105263] raid6: sse2x4 xor() 8978 MB/s dsm | [ 26.123263] raid6: avx2x1 gen() 19796 MB/s dsm | [ 26.141260] raid6: avx2x1 xor() 13472 MB/s dsm | [ 26.159262] raid6: avx2x2 gen() 22882 MB/s dsm | [ 26.177260] raid6: avx2x2 xor() 14082 MB/s dsm | [ 26.195260] raid6: avx2x4 gen() 26203 MB/s dsm | [ 26.213260] raid6: avx2x4 xor() 16892 MB/s dsm | [ 26.214309] raid6: using algorithm avx2x4 gen() 26203 MB/s dsm | [ 26.215637] raid6: .... xor() 16892 MB/s, rmw enabled dsm | [ 26.216855] raid6: using avx2x2 recovery algorithm dsm | [ OK ] Started SMBService's service unit. dsm | [ OK ] Created slice system-dhclient.slice. dsm | Starting DHCP client init... dsm | [ OK ] Started DHCP client init. dsm | Starting eth0 DHCP Client... dsm | [ OK ] Started eth0 DHCP Client. dsm | [ OK ] Started SecureSignIn's service unit. dsm | [ OK ] Started rc.network. dsm | Starting Set Multiple Geteway... dsm | Starting PPPoE... dsm | Starting Check if network is ready... dsm | [ OK ] Started PPPoE. dsm | [ OK ] Started Set Multiple Geteway. dsm | [ OK ] Reached target Network. dsm | Starting findhost daemon... dsm | Starting Network Time Service... dsm | [ OK ] Started Synology SCGI. dsm | Starting Synology SCGI... dsm | Starting Synology SCGI SocketIO... dsm | [ OK ] Started findhost daemon. dsm | [ 26.539594] xor: automatically using best checksumming function: dsm | [ 26.550261] avx : 29152.000 MB/sec dsm | [ OK ] Started Network Time Service. dsm | [ 26.604909] Btrfs loaded, crc32c=crc32c-intel dsm | [ 26.606960] BTRFS: device label 2025.03.27-14:19:45 v69057 devid 1 transid 266 /dev/sdb1 dsm | [ 26.611309] BTRFS info (device sdb1): enabling auto syno reclaim space dsm | [ 26.612939] BTRFS info (device sdb1): use ssd allocation scheme dsm | [ 26.614369] BTRFS info (device sdb1): turning on discard dsm | [ 26.615627] BTRFS info (device sdb1): using free space tree dsm | [ 26.616987] BTRFS info (device sdb1): using free block group cache tree dsm | [ 26.618569] BTRFS info (device sdb1): has skinny extents dsm | [ OK ] Started Synology Building Tasks Restore for Storage Manager. dsm | Stopping Synology Task Scheduler Vmtouch... dsm | [ OK ] Stopped Synology Task Scheduler Vmtouch. dsm | [ OK ] Started Synology Task Scheduler Vmtouch. dsm | Starting Synology Task Scheduler Vmtouch... dsm | [ OK ] Started Synology volume service. dsm | Starting Synology volume mount post hook... dsm | [ OK ] Started Synology volume mount post hook. dsm | [ OK ] Reached target Synology data volumes. dsm | Starting daemon for monitor logs and generate alert... dsm | Starting Synology Cron Daemon... dsm | Starting Prepare var service tmp... dsm | Starting Synology Database Update... dsm | Starting Check Synology shared folders... dsm | Starting Fix bind mount explosion problem... dsm | Starting Synology Cache Advisor Service... dsm | Starting Build-in PHP timezone updater... dsm | Starting Syno Data Protection - Btrfs Snapshot Meta Sync... dsm | Starting Syno Data Protection - Btrfs Deleted Subvolume Clean... dsm | Starting Load Bypass Traverse Checking... dsm | Starting daemon for monitor HW/system status... dsm | Starting Syno Data Protection - Btrfs Snapshot Count Sync... dsm | Starting Keep var services homes existing... dsm | Starting move user preference folder to volume.... dsm | Starting Syno Data Protection - Btrfs Snapshot Usage Task Clean... dsm | Starting Check Synology HotSpare Config... dsm | [ OK ] Started SNMP Daemon. dsm | Starting SNMP Daemon... dsm | Starting Daemon for Resource Monitor... dsm | Starting Syno Data Protection - Btrfs Snaptree reconstruct... dsm | [ OK ] Started daemon for monitor logs and generate alert. dsm | [ OK ] Started Synology Cron Daemon. dsm | [ OK ] Started Synology Database Update. dsm | [ OK ] Started Synology Cache Advisor Service. dsm | [ OK ] Started Build-in PHP timezone updater. dsm | [ OK ] Started Syno Data Protection - Btrfs Snapshot Meta Sync. dsm | [ OK ] Started Syno Data Protection - Btrfs Deleted Subvolume Clean. dsm | [ OK ] Started Check Synology shared folders. dsm | [ OK ] Started Load Bypass Traverse Checking. dsm | [ OK ] Started Syno Data Protection - Btrfs Snapshot Count Sync. dsm | [ OK ] Started Keep var services homes existing. dsm | [ OK ] Started Syno Data Protection - Btrfs Snapshot Usage Task Clean. dsm | [ OK ] Started Daemon for Resource Monitor. dsm | [ OK ] Started Syno Data Protection - Btrfs Snaptree reconstruct. dsm | [ OK ] Started Fix bind mount explosion problem. dsm | [ OK ] Started Wait for Synology Network to be Configured. dsm | Starting Synology Network Event Daemon... dsm | Starting Migrate all volume and share to quota DB... dsm | Starting Check share snapshot... dsm | [ OK ] Started Prepare var service tmp. dsm | [ OK ] Started move user preference folder to volume.. dsm | [ OK ] Started Check Synology HotSpare Config. dsm | [ OK ] Started Synology Network Event Daemon. dsm | [ OK ] Started Migrate all volume and share to quota DB. dsm | Starting Synology daemon for monitoring space/disk/cache status... dsm | Starting Nginx... dsm | [ OK ] Started Check share snapshot. dsm | [ OK ] Reached target Synology shared folders. dsm | Starting Remove session if the option enabled.... dsm | Starting synotifyd... dsm | Starting daemon for handle hotplug event... dsm | Starting Shared Folder Sync Daemon... dsm | Starting Build DB link for synolog... dsm | [ OK ] Started synotifyd. dsm | [ OK ] Started Remove session if the option enabled.. dsm | Starting Synology CGI Auth Daemon... dsm | [ OK ] Started Synology CGI Auth Daemon. dsm | [ OK ] Started Synology daemon for monitoring space/disk/cache status. dsm | Starting Sync data scrubbing config... dsm | [ OK ] Started Shared Folder Sync Daemon. dsm | [ 28.421656] Synotify use 16384 event queue size dsm | [ 28.439310] Synotify use 16384 event queue size dsm | [ OK ] Started daemon for handle hotplug event. dsm | [ OK ] Started Sync data scrubbing config. dsm | [ OK ] Started Build DB link for synolog. dsm | [ OK ] Started Check if network is ready. dsm | [ OK ] Reached target Network is Online. dsm | Starting Avahi daemon... dsm | Starting NetBIOS name server... dsm | Starting Set IP Conflict Detect... dsm | Starting Entry for WS-Transfer and WS-Discovery Server... dsm | Starting VPN Client... dsm | Starting deal with remote/ISO mount during when bootup and poweroff... dsm | Starting register ds region by ip... dsm | Starting broadcast synorelayd boot state... dsm | Starting Issue VDSM ready for intialization before boot-done.... dsm | [ 29.032510] capability: warning:
nginx' uses 32-bit capabilities (legacy support in use) dsm | [ 29.319598] loop: module loaded dsm | dsm | M73 login: [ 30.825101] iSCSI:target_core_rodsp_server.c:1027:rodsp_server_init RODSP server started, login_key(02113245650f). dsm | [ 30.853897] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized dsm | [ 30.886311] iSCSI:target_core_device.c:613:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288 dsm | [ 30.889243] iSCSI:target_core_configfs.c:5446:target_init_dbroot db_root: cannot open: /etc/target dsm | [ 30.891490] iSCSI:target_core_lunbackup.c:361:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully dsm | [ 30.938678] iSCSI:target_core_file.c:149:fd_attach_hba RODSP plugin for fileio is enabled. dsm | [ 30.940743] iSCSI:target_core_file.c:156:fd_attach_hba ODX Token Manager is enabled. dsm | [ 30.954037] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled. dsm | [ 30.961285] iSCSI:target_core_ep.c:795:ep_attach_hba RODSP plugin for epio is enabled. dsm | [ 30.963252] iSCSI:target_core_ep.c:802:ep_attach_hba ODX Token Manager is enabled. dsm | [ 31.147131] workqueue: max_active 1024 requested for vhost_scsi is out of range, clamping between 1 and 512 dsm | [ 32.734798] 8021q: 802.1Q VLAN Support v1.8 dsm | [ 32.735864] 8021q: adding VLAN 0 to HW filter on device eth0 dsm | dsm | ❯ ----------------------------------------------------------- dsm | ❯ You can now login to DSM at port 5000 dsm | ❯ ----------------------------------------------------------- dsm | dsm | [ 34.298818] fuse init (API version 7.23)Screenshots (optional)