search

ventoy / Ventoy

A new bootable USB solution.
https://www.ventoy.net
GNU General Public License v3.0
61.9k stars 4.03k forks source link

Win PE create with mdt not working since ventoy 1.0.13 #298

Closed admmozilla78 closed 2 years ago

admmozilla78 commented 4 years ago

I Have a problem to boot with win Pe create from MDT since ventoy 1.0.13 ( I Have tested with the 1.0.15 same issue; 1.0.12 is OK) , the blue screen is IO1_initalisation_failed . I cannot find specific explanation( about bootable usb key) for this blue screen on the net. About the win pe i've tested with dell driver pack and whitheout but it didn't change anything.

ventoy commented 4 years ago

Can you give such an ISO file for test?

admmozilla78 commented 4 years ago

Yes, a juste need an e mail adress to share a one drive link

ventoy commented 4 years ago

admin@ventoy.net

FingerlessGlov3s commented 3 years ago

@admmozilla78

Is you MDT winpe created from SCCM?

I've been trying to get SCCM task sequence working, I can boot in the WINPE but it can't then find any of the SMS media. To get this far I had to the WIM plugin.

I tried reformatting the first partition as FAT32, copied over the content from the SCCM TS ISO to the root of the partition but no luck.

This same thing your trying to do?

I'm kinda guessing Ventoy can't support this boot thingy...

admmozilla78 commented 3 years ago

HI ,

we dont use SCCM but just MDT installed on a computer. The iso is boooting but I have blue screen( IO error ) so it's a bit different.

De : FingerlessGloves notifications@github.com Envoyé : mardi 27 octobre 2020 21:24 À : ventoy/Ventoy Ventoy@noreply.github.com Cc : admmozilla78 gobelkie@hotmail.com; Mention mention@noreply.github.com Objet : Re: [ventoy/Ventoy] Win PE create with mdt not working since ventoy 1.0.13 (#298)

@admmozilla78https://github.com/admmozilla78

Is you MDT winpe created from SCCM?

I've been trying to get SCCM task sequence working, I can boot in the WINPE but it can't then find any of the SMS media. To get this far I had to the WIM plugin.

I tried reformatting the first partition as FAT32, copied over the content from the ISO to the root of the partition but no luck.

This same thing your trying to do?

I'm kinda guessing Ventoy can't support this boot thingy...

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/ventoy/Ventoy/issues/298#issuecomment-717517144, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ALRRSSKJGTE4KLGBBFDWDULSM4UADANCNFSM4OWJ2KXQ.

ventoy commented 2 years ago

This is an old issue. I will close it now. If you still have problem with latest Ventoy release, you can reopen the issue.