After update to last Beta: File not found

[Diddlik]

Describe the bug After updating to the latest beta when calling up Web-UI, the error message appears: File not found

Device information

• Olizig
• { "network-config": { "wifiEnbl": false, "wifiSsid": "", "wifiPass": "", "wifiDhcp": true, "wifiIp": "0.0.0.0", "wifiMask": "255.255.255.0", "wifiGate": "0.0.0.0", "wifiDns1": "1.1.1.1", "wifiDns2": "8.8.8.8", "wifiPwr": 78, "wifiMode": 1, "ethEnbl": true, "ethDhcp": false, "ethIp": "192.168.1.40", "ethMask": "255.255.255.0", "ethGate": "192.168.1.1", "ethDns1": "192.168.1.50", "ethDns2": "8.8.8.8" }, "vpn-config": { "wgEnable": false, "wgLocalIP": "0.0.0.0", "wgLocalSubnet": "255.255.255.0", "wgLocalPort": 33333, "wgLocalGateway": "0.0.0.0", "wgLocalPrivKey": "", "wgEndAddr": "", "wgEndPubKey": "", "wgEndPort": 0, "wgAllowedIP": "0.0.0.0", "wgAllowedMask": "0.0.0.0", "wgMakeDefault": true, "wgPreSharedKey": "", "hnEnable": false, "hnJoinCode": "", "hnHostName": "XZG-EB10", "hnDashUrl": "default" }, "mqtt-config": { "enable": true, "server": "192.168.1.50", "port": 1883, "user": "*", "pass": "**", "topic": "Olizig", "updateInt": 60, "discovery": true, "reconnectInt": 30 }, "system-config": { "disableWeb": false, "webAuth": false, "webUser": "", "webPass": "", "fwEnabled": false, "fwIp": "0.0.0.0", "fwMask": "0.0.0.0", "serialSpeed": 115200, "socketPort": 6638, "tempOffset": 20, "disableLedUSB": false, "disableLedPwr": false, "refreshLogs": 1, "hostname": "Olizig", "timeZone": "Europe/Berlin", "ntpServ1": "pool.ntp.org", "ntpServ2": "time.google.com", "nightMode": false, "startHour": "23:00", "endHour": "07:00", "workMode": 0, "zbRole": 1, "zbFw": "20240710", "updHour": "01:00", "updDays": "*", "autoIns": false } }

[Eucliwood090]

I have the same problem and can't go back to another version...

[Eucliwood090]

no one ?

[cnstudio]

I have the same problem too! happen when upgrade from 20240914 to 20241001, the web UI only show "file not found", and device keeping reboot itself again and again.

so I can NOT use ZigStarGW-MT tool to flash firmware to other version, because when ZigStarGW-MT upload firmware file to about 10% ~ 15%, then the device reboot itself.

[mihsu81]

You can flash it over serial (USB) using the Web Flasher Worked fine for me. P.S. Keep in mind that you'll lose your previous settings after flashing but you can copy them from the serial logs of the Web Flasher before flashing.

[Eucliwood090]

How did you do it because it's impossible, the flash doesn't start, did you touch the switch? Do a special manipulation?

[Diddlik]

Simply connect to the PC via USB and start the flash process

[Eucliwood090]

i have https://zig-star.com/projects/zigbee-gw-lan/

[Eucliwood090]

E (17545) wifi_init_default: netstack cb reg failed with 12308 13740 [printLogMsg] [RCP] FW: Unknown! Check serial speed! 13740 [setup] [RCP] FW : 0 13740 [setup] [ESP] FW: 20241001 13751 [setupCoordinatorMode] Network 13860 [mD NS_start] mDNS responder started on ZigStarGW.local 13895 [setup] { "system-vars": { "hwBtnIs": false, "hwLedUsbIs": false, "hwLedPwrIs": false, "hwZigbeeIs": true, "connectedClients": 0, "socketTime": 0, "connectedEther": false, "apStarted": false, "wifiWebSetupInProgress": false, "vpnWgInit": false, "vpnWgConnect": false, "vpnWgPeerIp": "0.0.0.0", "vpnWgCheckTimeKey": 0, "vpnHnInit": false, "mqttConn": false, "mqttReconnectTime": 0, "mqttHeartbeatTime": 0, "disableLeds": false, "zbFlashing": false, "deviceId": "XZG-5291", "espUpdAvail": false, "rcpUpdAvail": false } } 13946 [setup] done E (20549) wifi_init_default: netstack cb reg failed with 1230 8 E (24546) wifi_init_default: netstack cb reg failed with 12308 20374 [mDNS_start] mDNS responder started on ZigStarGW.local

[Diddlik]

than you have to use ttl converter to flash esp32