search

zarfld / LinuxCnc_PokeysLibComp

Pokeys comp for LinuxCnc using https://bitbucket.org/mbosnak/pokeyslib.git
MIT License
5 stars 0 forks source link

PoExtBus Get&Set according to PokeysGUI works But Relays on PoRelay are not switching ... #1

Closed zarfld closed 2 years ago

zarfld commented 2 years ago

.. Same behaviour if it is tried to Set Outs on PoKeys-Gui for PoExtBus,

it only works on "PoExtBus Smart" page.

Need to find a way to use that with PokeysLib

zarfld commented 2 years ago

implementation of PoRelay8 commands as described in section "PoExtBus Smart – protocol definition" needs to be added to PokeysLib.

zarfld commented 2 years ago

solved - problem was based on cabling: using the white "PoExtBus"-Cable directly connected directly on Pokeys57E the Relays are switching correctly. in the Meanwhile also "poextbusoc16" arrived - which needs to be connected in parrallel on Pokeys57E on the same connector.

when connecting them on "PoNetI2Cextender" (whwich was delivered with kbd48CNC) behaviour is as described in Problem description. now also PoNetI2Cextender is connected in Parallel using the white "PoExtBus" Cables. (Starpattern with Center on Pokeys57E)