0x23
commented
5 months ago No, unfortunately I dont have a BOM but you can lookup all the dimensions in the CAD file and if you like to contribute create a BOM for the project yourself. The Pistons and Cylinders were taken from this cheap car tire air compressor:
[image: epap03-air-pump.jpg] But be warned - the thing is really low quality (The cooling fins are fake and made from Plastik) and it did not seal very well making it unusable for low RPM. Thats why I have only taken the seals and the Cylinderpipes and discarded the rest.
On Fri, Apr 12, 2024 at 4:49 AM Darkhand81 @.***> wrote:
Awesome project! Do you have a BOM or list of the non-printed parts, such as the quantity and dimensions of the rods, screws, etc, as well as where you sourced the pistons, cylinders, and valvehead?
— Reply to this email directly, view it on GitHub https://github.com/0x23/QuietAirCompressor/issues/1, or unsubscribe https://github.com/notifications/unsubscribe-auth/AB2YJW2USY5K55Q55EJZSIDY45DSXAVCNFSM6AAAAABGDLKN3WVHI2DSMVQWIX3LMV43ASLTON2WKOZSGIZTQOJUGA4TSOA . You are receiving this because you are subscribed to this thread.Message ID: @.***>
Awesome project! Do you have a BOM or list of the non-printed parts, such as the quantity and dimensions of the rods, screws, etc, as well as where you sourced the pistons, cylinders, and valvehead?