Open Giovix92 opened 2 years ago
Please provide the kernel log as per FAQs.
Here you are:
❯ kextstat | grep rtsx
86 0 0 0x106000 0x106000 science.firewolf.rtsx (0.9.6) 896FEAB9-732E-3779-B18D-F714BF427168 <33 24 16 6 3>
❯ sudo dmesg | grep "rtsx"
[ 110.846934]: successfully parsed 1/4 entries for file rtsx.logIOConsoleUsers: time(0) 0->0, lin 1, llk 0,
Those are the only things I could achieve right now.
The "kernel log" with the command sudo dmesg | grep RTSX > ~/Desktop/rtsx.log
just returns an empty log file.
Used the 0.9.6 DEBUG version + these boot arguments: -wegnoegpu igfxonln=1 brcmfx-country=#a alcid=13 msgbuf=10485760
.
Tried the latest artifact, with RealtekCardReaderFriend the PCIe card reader is detected under System Informations / Card Readers, though still no useful dmesg available. Anything else I can do?
@Giovix92 you forgot to use the DEBUG version of the kext
@0xFireWolf Attached is the dump of my machine running Mojave 10.14.6. Steps to reproduce:
Output from sysreport:
Built in SD Card Reader:
Vendor ID: 0x10ec
Device ID: 0x5287
Subsystem Vendor ID: 0x1025
Subsystem ID: 0x1094
Revision: 0x0001
Link Width: x1
Link Speed: 2.5 GT/s
As a quick note: this reader is "functional" with the classic Sinetek-rtsx kext, if that helps you in any form.
If you need any more info let me know rtsx.log
@Giovix92 you forgot to use the DEBUG version of the kext
@0xFireWolf Attached is the dump of my machine running Mojave 10.14.6. Steps to reproduce:
- Boot up/log in w/o SD card
- Insert SD card
- Eject SD card
Output from sysreport:
Built in SD Card Reader: Vendor ID: 0x10ec Device ID: 0x5287 Subsystem Vendor ID: 0x1025 Subsystem ID: 0x1094 Revision: 0x0001 Link Width: x1 Link Speed: 2.5 GT/s
As a quick note: this reader is "functional" with the classic Sinetek-rtsx kext, if that helps you in any form.
If you need any more info let me know rtsx.log
As I've stated in a previous reply, I actually did use the DEBUG version, since it was pointed out on the FAQs, plus I did put the msgbuf
boot argument.
I'm running Monterey 12.1, by the way.
I'm getting the same sysreport result, just no dmesg log.
I'm getting the same sysreport result, just no dmesg log.
I have these sysargs in my boot parameters (OpenCore). Maybe "debug" will do it for you?
keepsyms=1 debug=0x100 swd_panic=1
EDIT: Ignore this. Not relevant for your problem
Hello there, I have an RTS5287 (aka RTL8411B) card reader, and I can't get it to work at all. Reading the known issues page, I've seen that the device is almost "killed" since the start. Is there anything I could do/provide to help enabling it? An IOReg maybe?
Thank you!