add expert account; not connecting

[GoogleCodeExporter]

I try to add my webcalldirect account without success as it is not
connecting in the end. 

Account name: webcalldirect
Account id: 'my name'
Registration URI: sip:webcalldirect.com
Realm: *
Username: 'username string' 
Data (password): 'password string'
Data Type: plain password
Scheme: Digest
Publish enabled: no

What am I doing wrong? 
Thanks for the help

Original issue reported on code.google.com by christia...@gmail.com on 13 Apr 2010 at 7:46

[GoogleCodeExporter]

Not a bug :
Account ID is not written in the good format :

Should be :
<sip:username@webcalldirect.com> 
or
Your display name <sip:username@webcalldirect.com>

< and > are important. In next release i'll try to implement something to check
account id and registration uri validity. But for now as it's a alpha there is 
not
yet this feature in wizards.
Note that your configuration is compatible with the alcatel lucent wizard.

Original comment by r3gis...@gmail.com on 14 Apr 2010 at 12:30

[GoogleCodeExporter]

Original comment by r3gis...@gmail.com on 14 Apr 2010 at 3:45

[GoogleCodeExporter]

Following your instruction, I get a request timeout by registration. I have 
tried to
increase time before timeout, but no success. 

Original comment by christia...@gmail.com on 14 Apr 2010 at 4:07

[GoogleCodeExporter]

Timeout in expert wizard correspond to re-registration timeout.

Timeout error after it tries to register probably means something goes wrong 
with
connection to the server.

* Are you using wifi or 3G connection? Some mobile operators, (in France that's 
the
case of the 2 carriers) prevent from using VoIP on their data network (not only 
in
their contract but also in their firewall).
* If you use wifi, are you sure a pc on the same network can register to your 
sip
server (dns resolution, firewall etc etc)?

You can try to re-register just by checking/unchecking the box, but if 
everything are
ok, the application will automatically detect when you are connected.
Note also that there is options in Settings to enable/disable wifi/3G 
connection type
to use VoIP. If your carrier doesn't allow you to use their network for voIP, 
both 3G
checkboxes must be unchecked.

Original comment by r3gis...@gmail.com on 14 Apr 2010 at 4:18

[GoogleCodeExporter]

Thanks for the suggestions. Actually I have no problem with the same 
configuration in
Sipdroid or SipAgent, either with 3G or wifi. So basically it shouldn't be a
connection problem. 

Original comment by christia...@gmail.com on 14 Apr 2010 at 4:21

[GoogleCodeExporter]

Ok, really strange.

You can try either :
* Replace sip:webcalldirect.com by sip:77.72.169.9

* Try to use the Alcatel wizard. 
    Phone number field is username 
    User login is authentification login (i think that for your configuration it's
the same that username)).
    SIP domain, in your case webcalldirect.com
    Server : (can be blank, webcalldirect.com or 77.72.169.9)

If it still doesn't work, i would be interested if you can produce some log 
(using
logcollector for example).

Thanks for the report

Original comment by r3gis...@gmail.com on 14 Apr 2010 at 5:48

[GoogleCodeExporter]

The latest version bring a lot of improvements with account management. (There 
is
also a Basic wizard that should simplify the configuration for you). If you 
want to
use CSipSimple with a 3G connection (and that your carrier allow you to), don't
forget to go in Options > Network and check the two 3G boxes.

Let me know if it solves the problem for you.

Original comment by r3gis...@gmail.com on 10 May 2010 at 5:59

[GoogleCodeExporter]

I have been able to configure my webcalldirect account. 
Yet, if I try to place a call in Switzerland, I get an operator message 
basically
saying 'the line is blocked for outgoing, except for emergency calls' ???

Further I haven't been able to figure how to configure the caller id for 
outgoing calls. 

Original comment by christia...@gmail.com on 10 May 2010 at 6:08

[GoogleCodeExporter]

I'm not sure but I think that CallerID can be set using the expert wizard. In 
the
account Id if you fill "CallerID <sip:username@domain>" it should set the 
caller id
to CallerID.

For the issue with the operator message I don't know. Do you think it could be 
linked
to the missing of the caller ID? I think that if it works both with SipDroid and
SipAgent there is probably something that miss in my configuration (all the 
more so
as SipAgent use the same stack that I use).

I have to investigate a little bit more this point for caller ID. So i'll open 
a new
issue for that point. 
Keep me informed for the issue with your operator (if trying to set the 
callerid in
expert wizard solves something - if so I think that i'll add an "Advanced" 
wizard
without all the params of the expert but with some additional fields).

Original comment by r3gis...@gmail.com on 10 May 2010 at 7:25

• Changed state: Fixed

[GoogleCodeExporter]

Regarding operator message, it was totally my fault, I had been given an unvalid
number to call. I am deeply sorry for that!

Original comment by christia...@gmail.com on 10 May 2010 at 3:38

[GoogleCodeExporter]

Ok, good news :)

Many thanks for your tests.

P.S. : If your phone is not yet in the list
http://code.google.com/p/csipsimple/wiki/SupportedDevices do not hesitate to 
add a
comment (or let me know and i'll add it to "supported devices" at least 
regarding the
native stack, if it's android 1.5 there is a lot of known issues but if you can 
place
a call I consider that a device is supported)

Original comment by r3gis...@gmail.com on 10 May 2010 at 3:52

• Changed state: Verified

[GoogleCodeExporter]

I have added a comment with my device which is an htc magic/sapphire with 
android 2.1. 

Original comment by christia...@gmail.com on 10 May 2010 at 4:59

[GoogleCodeExporter]

Hi
I read a lot of positice reviews about csipsimple, thereby I decided to 
download it through the android market and intall it on my htc wildfire, now I 
keep failing when it comes to add my lowratevoip or voipwise account to the 
software,  I am new to all this stuff, and I don't even know which option I 
should choose, betwenn basic, advanced, expert or sipgate, I tried to figure 
out all possibilities but still getting the same message "registration failed - 
check your configuration.
Thanks

Original comment by patron...@googlemail.com on 2 Apr 2011 at 2:16

[GoogleCodeExporter]

I also have connection problems with viva.gr.

Initially I setup the account and was working perfectly. However, the last 15 
days  get request timeout. Something is wrong either with viva or csipsimple

Original comment by michalis...@gmail.com on 16 Apr 2011 at 7:38