Ubuntu on PC works well, but abnormal on ARM odroid-u3 ubuntu.

[GoogleCodeExporter]

Hi, all

I followed the instructions and it works well on my PC.

I got an odroid-u3 board

http://hardkernel.com/main/products/prdt_info.php?g_code=G138745696275

Every step goes well, but when executed somagic-capture,
I got images below

Original issue reported on code.google.com by xiwei....@gmail.com on 15 Mar 2014 at 1:21

Attachments:

• [截图 - 2014年03月15日 - 17时21分21秒.png](https://storage.googleapis.com/google-code-attachments/easycap-somagic-linux/issue-25/comment-0/截图 - 2014年03月15日 - 17时21分21秒.png)

[GoogleCodeExporter]

I am running on a Trimslice arm device with the latest tegra arch Linux. 
Everything builds and installs fine. No errors.

I see similar results as reported above. Image is "jumpy". But this could be 
because of my input - I'm testing with the composite out of my raspberry pi.

My real use will be a security cam with composite output. Will test when I get 
the camera.

Original comment by jhargrav...@gmail.com on 29 Mar 2014 at 3:30

[GoogleCodeExporter]

Hi, glad to see your reply.

If you get good news, please tell me.

Thank you.

We do the same work in different places, maybe different countries;  

Wish we could be good friends, and communicate with each other.

~Xiwei in China

Original comment by xiwei....@gmail.com on 29 Mar 2014 at 6:27

[GoogleCodeExporter]

Hello everybody,

I'm using easycap on ARM processor, all installation was fine, no errors, but 
when I capture image happens the same reported in this thread, the image 
"jumpy".

Anyone found solution for this?

Original comment by cleiton....@gmail.com on 16 Jan 2015 at 8:34

[GoogleCodeExporter]

Hi. 
Same here at Raspberry Pi. Under ubuntu on my laptop it works well (if you have 
some problems, check power source for good quality and voltage!).

I think there should be some kind of problems with ARM implementation of 
libraries or somagic-capture itself.

Original comment by bartek.z...@gmail.com on 3 Feb 2015 at 12:43