search

360manu / kettlerUSB2BLE

Bridge from USB to Bluetooth low energy for old Kettler Trainers (Ergorace, ..) for Zwift and other apps
MIT License
38 stars 28 forks source link

Rouvy and RGT no connecting/breaking connection #10

Closed thesoulpole closed 2 years ago

thesoulpole commented 4 years ago

Hi another problem :( I tried to connect Rouvy - it says "Device cannot be connected as Power Source" So it does SEE the kettlerBLE, but no conection

IMG_3239 IMG_3240

I also tried to connect RGT I also SEES the kettlerBLE, and sometimes itDOES connect, and then I have control, but only for a few seconds, then the connection disappears. Sometimes it comes back after a minute or two for a few seconds, but then drops immediately. IMG_3242 IMG_3243 IMG_3245

Any idea whats wrong? (Do these aps use the protokol ina different way than Zwift?)

360manu commented 4 years ago

I never checked with Rouvy. That's true that I did not implement a full protocol as it is working with zwift.

Sturmenstrudel commented 3 years ago

Hi, don't know if same problem but I see also zero power when connecting to a Surface Pro 3 tablet running The Sufferfest. The KettlerBLE sensor is detected but no data is exchanged (read or write). On the contrary, it works very well on a Samsung A50 with Zwift and on an iPhone 8+ with The Sufferfest... Merci! On my Garmin 945 watch I can't find the sensor. I hope it helps... please let me know if you want me to run some tests.

Just forgot: my bike is an old Ergoracer GT with serial port, connected through a serial-to-USB adaptor.

dcantir commented 3 years ago

I never checked with Rouvy. That's true that I did not implement a full protocol as it is working with zwift.

I can look into this if you can add a bit more details on what should be done.

ingramwright commented 2 years ago

Any advice on how to connect to Rouvy?

360manu commented 2 years ago

Hello

I fixed some point of the code. And it works for me (Rouvy, Bkool) Need to check RGT but seems OK

Emmanuel