Introducing the 3DO Enclosure & Nozzle Camera V2, a modular camera system designed for 3D printers. Building on the success of our V1 camera, this new version offers enhanced flexibility with interchangeable FPC cables and camera sensors/lenses, all supported by a single DSP PCB with added LED functionality.
The firmware tool ( 3DO_FW_TOOL_armv7a ) change the "Nozzle Camera V1" to "usb-3DO_3DO_4K_USB_CAMERA_EU" the same name as "Enclosure Camera V2"
after udate, v4l only list one camera then both are plug in with the same name on a Raspberry pi 4 running mainsail/klipper.
It listed the right name in the tool before update.
Need some parameter in the tool to tell the difference between Enclosure and Nozzle camera or inside the code.
thbl
commented
3 months ago
The firmware tool ( 3DO_FW_TOOL_armv7a ) change the "Nozzle Camera V1" to "usb-3DO_3DO_4K_USB_CAMERA_EU" the same name as "Enclosure Camera V2" after udate, v4l only list one camera then both are plug in with the same name on a Raspberry pi 4 running mainsail/klipper.
It listed the right name in the tool before update.
Need some parameter in the tool to tell the difference between Enclosure and Nozzle camera or inside the code.