search

4712 / BLHeliSuite

https://drive.google.com/drive/folders/1Y1bUMnRRolmMD_lezL0FYd3aMBrNzCig
157 stars 52 forks source link

4-way Silabs suite hangs #9

Closed hsuq510 closed 8 years ago

hsuq510 commented 8 years ago

Using the 4-way interface to read a Silabs ESC (LB 20Pro) the Blheli suite hangs. The 14.4 still works fine. I tried to reprogram the NANO 328 with the interface inside 14.5 but issue still occurs.

4712 commented 8 years ago

What file did you flash to the NANO 328? Please post log.tlg.

hsuq510 commented 8 years ago

I have tested all 4wArduino_Nano__16* and also the Pro mini with 328. It connects and square appear, but as soon I read setup, blheli suite hangs. Instead im able to read setup with the same Nano 328 within the 14.4 suite and the with file Arduino_Nano__16_Multi using D3 and GND pin.

Since the blheli is not responding I cant save the log.tlg. I can attach the screenshot.

blheli

hsuq510 commented 8 years ago

Ok, I was able to use 1-wire instead. But with 14.4 suite the 4-way interface was working and no need to reprogram Nano to use USB/Com.

4712 commented 8 years ago

@hsuq510 For the LB 20A Pro, you can use the 4wArduino_m328P_16_MULTIv14400.hex file also with the newest BLHeliSuite. Did you try this?

4712 commented 8 years ago

@hsuq510 Ok found the issue (sync objects in XP and Wine), it will be fixed in the next release. Thanks!

4712 commented 8 years ago

Hopefully fixed in rev 16.1.14.6.0.0