4IceG / luci-app-3ginfo-lite

Graphic visualization of the mPCI-E / M.2 and USB 3G / LTE / LTE-A / 5G modem connection status. (LuCI JS) | OpenWrt >= 21.02
90 stars 35 forks source link

Problem z nowa wersja #74

Closed lukjod closed 2 months ago

lukjod commented 2 months ago

Hej @4IceG Nowa wersja nie dziala z moim modem Huawei e5786s pomimo wlasciwych ustawien. Po powrocie do 1.0.67-20240421 wszystko jest ok

4IceG commented 2 months ago

Hejka @lukjod Coraz trudniej jest mi utrzymywać pakiet, dla takiej różnorodności modemów. Jak widać, jednym naprawię to drugim napsuję. Jak możesz wrzuć wersję 1.0.68 i pokaż wynik sh -x /usr/share/3ginfo-lite/3ginfo.sh może coś się zaradzi.

lukjod commented 2 months ago

Ponownie uruchomilem ruter i zaczelo dzialac, przepraszam za zawracanie glowy. A ponizej odpowiedz serwera `BusyBox v1.36.1 (2023-11-15 10:00:19 UTC) built-in shell (ash)


| |.-----.-----.-----.| | | |.----.| | | - || | -| || | | || || | |___|| |_||||____||| |__| |__| W I R E L E S S F R E E D O M

OpenWrt 23.05-SNAPSHOT, r23821-77b7c10884
Build time: 2024-04-06 12:59 CEST
Cezary Jackiewicz, https://eko.one.pl

| Machine: ASUS TUF-AX4200 | | Uptime: 2d, 05:21:14 | | Load: 0.06 0.05 0.00 | | Flash: total: 140.3MB, free: 131.6MB, used: 3% | | Memory: total: 486.9MB, free: 384.0MB, used: 21% | | Leases: 13 | | lan: static, 192.168.1.1 | | wan: pppoe, 185.119.148.133 | | wan6: dhcpv6, ? | | WAN_USB: dhcp, 192.168.8.100 | | radio0: lan, mode: ap, ssid: lukjod_1, channel: 7, conn: 0 | | radio1: lan, mode: ap, ssid: lukjod_2, channel: 64, conn: 2 |

root@OpenWrt_pietro:~# sh -x /usr/share/3ginfo-lite/3ginfo.sh

T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=1506 Rev= 1.02 S: Manufacturer=HUAWEI_MOBILE S: Product=HUAWEI_MOBILE C: #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=12 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=16 Driver=huawei_cdc_ncm E: Ad=84(I) Atr=03(Int.) MxPS= 16 Ivl=2ms I: If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=16 Driver=huawei_cdc_ncm E: Ad=84(I) Atr=03(Int.) MxPS= 16 Ivl=2ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=10000 MxCh= 1 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 3.10 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1 P: Vendor=1d6b ProdID=0003 Rev= 5.15 S: Manufacturer=Linux 5.15.153 xhci-hcd S: Product=xHCI Host Controller S: SerialNumber=11200000.usb C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms'

4IceG commented 2 months ago

Spoko nie ma problemu, każdy chce aby u niego działało :).

@lukjod Jak już pokazałeś wynik to możemy coś poprawić.

Jak możesz to podmień plik huawei_hilink.sh (\usr\share\3ginfo-lite\modem\hilink) huawei_hilink.zip

lukjod commented 2 months ago

@4IceG , Dzieki podmienilem plik restartowalem ruter i ponownie zrobilem sh -x /usr/share/3ginfo-lite/3ginfo.sh oto wynik: `+ RES=/usr/share/3ginfo-lite

T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=1506 Rev= 1.02 S: Manufacturer=HUAWEI_MOBILE S: Product=HUAWEI_MOBILE C: #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=12 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=16 Driver=huawei_cdc_ncm E: Ad=84(I) Atr=03(Int.) MxPS= 16 Ivl=2ms I: If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=16 Driver=huawei_cdc_ncm E: Ad=84(I) Atr=03(Int.) MxPS= 16 Ivl=2ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=10000 MxCh= 1 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 3.10 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1 P: Vendor=1d6b ProdID=0003 Rev= 5.15 S: Manufacturer=Linux 5.15.153 xhci-hcd S: Product=xHCI Host Controller S: SerialNumber=11200000.usb C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms'

4IceG commented 2 months ago

Skrypt pokazuje więcej. Teraz pytanie czy wszystko działa pod LuCI.

lukjod commented 2 months ago

tak to wyglada Zrzut ekranu 2024-04-23 220150

4IceG commented 2 months ago

Jest OK. Ile mogłem to uzupełniłem, więcej modem nie pokazuje, więc musi zostać tyle ile widzimy.

lukjod commented 2 months ago

Dzieki jeszcze raz