search

4IceG / luci-app-modemband

User interface for the modemband package. Program to set LTE/5G bands for selected 4G/5G modems. (LuCI JS) | OpenWrt >= 21.02
84 stars 29 forks source link

Support for Quectel RM500Q-GL #13

Closed atsrxL closed 11 months ago

atsrxL commented 11 months ago

Hello， Please add support for Quectel RM500Q-GL

Here's the information you need that u listed: MODEL:Quectel RM500Q-GL Revision: RM500QGLABR11A06M4G

USB Device: Bus 006 Device 003: ID 2c7c:0800 Quectel RM500Q-GL

Serial : /dev/ttyUSB1

AT command to read current nr5g band setup; AT+QNWPREFCFG="nr5g_band" +QNWPREFCFG: "nr5g_band",1:2:3:5:7:8:12:20:25:28:38:40:41:48:66:71:77:78:79

AT command to set nr5g band; AT+QNWPREFCFG="nr5g_band",41:79

Supported bands; AT+QGETCAPABILITY? +QGETCAPABILITY:NR:n1,n2,n3,n5,n7,n8,n12,n20,n25,n28,n38,n40,n41,n48,n66,n71,n77,n78,n79 +QGETCAPABILITY:LTE-FDD:B1,B2,B3,B4,B5,B7,B8,B12,B13,B14,B17,B18,B19,B20,B25,B26,B28,B29,B30,B32,B66,B71 +QGETCAPABILITY:LTE-TDD:B34,B38,B39,B40,B41,B42,B43,B46,B48 +QGETCAPABILITY:WCDMA:B1,B2,B3,B4,B5,B6,B8,B19 +QGETCAPABILITY:LTE-CATEGORY:CAT16 +QGETCAPABILITY:LTE-CA:1

If there is any other info you need , I will be glad to provide. Thank you very much.

4IceG commented 11 months ago

Hi @atsrxL OK thanks.

It's funny because the modem probably has the same ID as Quectel RG502Q-EA, so need to identify them somehow.

atsrxL commented 11 months ago

Hi thank you for your reply , as my unstanding r m/g 500q-XX & 502q-XX might share a same pid:vid , can we just set a menu that select model manually? or maybe use ATI returned model name to do the identification.

4IceG commented 11 months ago

I'll figure something out, I just need some free time.

atsrxL commented 11 months ago

I saw the update, Very thankful to you.

Rafał Wabik @.***> 于 2023年9月12日周二 15:11写道：

Closed #13 https://github.com/4IceG/luci-app-modemband/issues/13 as completed.

— Reply to this email directly, view it on GitHub https://github.com/4IceG/luci-app-modemband/issues/13#event-10342560758, or unsubscribe https://github.com/notifications/unsubscribe-auth/AMEKINDN3UAPC3XQCROBHQDX2ADINANCNFSM6AAAAAA4EDGHYM . You are receiving this because you were mentioned.Message ID: @.***>

atsrxL commented 11 months ago

Hi man, There have an another problem i have faced , when I compiled your 3ginfo&modemband into openwrt firmware through menuconfig , or just opkg install the ipks you've provided , In packet manager shows its installed , also sms-tooI is useful, but can't find the entry from luci interface, am i missing something?

When I try to manually input the address for 3ginfo ,it will shows :

No page is registered at '/admin/modem/3ginfo-lite'.

Rafał Wabik @.***> 于2023年9月12日周二 15:11写道：

Closed #13 https://github.com/4IceG/luci-app-modemband/issues/13 as completed.

— Reply to this email directly, view it on GitHub https://github.com/4IceG/luci-app-modemband/issues/13#event-10342560758, or unsubscribe https://github.com/notifications/unsubscribe-auth/AMEKINDN3UAPC3XQCROBHQDX2ADINANCNFSM6AAAAAA4EDGHYM . You are receiving this because you were mentioned.Message ID: @.***>

4IceG commented 11 months ago

Hi man, There have an another problem i have faced , when I compiled your 3ginfo&modemband into openwrt firmware through menuconfig , or just opkg install the ipks you've provided , In packet manager shows its installed , also sms-tooI is useful, but can't find the entry from luci interface, am i missing something?

Hi @atsrxL , Describe what exactly you are doing because I don't know if you have an error when compiling or installing packages from ipk.

The packages work and must be visible from the LuCI level. If the package is not visible in the menu (applies to installations with ipk), you need to log out and log in again to the router / clear the browser cache.

atsrxL commented 11 months ago

Hi there,

Here are some pic will show you my situation.

1,compile with no error. [image: notepad_If81XLKODc.png][image: e2b07902-9b08-43d7-9c04-5939349c27dc.png]

2,App can be found in package manager,but in the submenu of modem can only see sms-tool. [image: chrome_0PqJsn1BzE.png][image: chrome_FamnNGodRy.png]

3,Direct goto 3ginfo-lite will do nothing. [image: chrome_ra6IMar9ov.png]

Sorry for my system language , I'm trying to add some tip to make it clearly.

Rafał Wabik @.***> 于2023年9月13日周三 13:09写道：

Hi man, There have an another problem i have faced , when I compiled your 3ginfo&modemband into openwrt firmware through menuconfig , or just opkg install the ipks you've provided , In packet manager shows its installed , also sms-tooI is useful, but can't find the entry from luci interface, am i missing something?

Hi @atsrxL https://github.com/atsrxL , Describe what exactly you are doing because I don't know if you have an error when compiling or installing packages from ipk.

The packages work and must be visible from the LuCI level. If the package is not visible in the menu (applies to installations with ipk), you need to log out and log in again to the router / clear the browser cache.

— Reply to this email directly, view it on GitHub https://github.com/4IceG/luci-app-modemband/issues/13#issuecomment-1716952888, or unsubscribe https://github.com/notifications/unsubscribe-auth/AMEKINHXJUEQVJXRHI372FLX2E5XXANCNFSM6AAAAAA4EDGHYM . You are receiving this because you were mentioned.Message ID: @.***>

4IceG commented 11 months ago

Send everything again, no images were sent.

atsrxL commented 11 months ago

Hi , will this work?

Rafał Wabik @.***> 于2023年9月13日周三 14:27写道：

Send everything again, no images were sent.

— Reply to this email directly, view it on GitHub https://github.com/4IceG/luci-app-modemband/issues/13#issuecomment-1717021695, or unsubscribe https://github.com/notifications/unsubscribe-auth/AMEKINHVL2M65DGBYHCSQDTX2FG5NANCNFSM6AAAAAA4EDGHYM . You are receiving this because you were mentioned.Message ID: @.***>

4IceG commented 11 months ago

I don't see the pictures. Reply normally on github with photos/screenshots or error messages.