Closed przemekp1 closed 2 years ago
Siema, Jak możesz to przygotuj wszystko wedle rozpiski dla tego EM7455:
Nie ma to jak własna inicjatywa :) Pozdrawiam
może logi ze skrypu autoflash cat: /dev/: Jest katalogiem cat: /dev/: Jest katalogiem cat: /dev/: Jest katalogiem AT
OK AT!ENTERCND="A710"
OK AT!USBCOMP=1,1,0000100D
OK AT!RESET
OK AT
OK ATE1
OK AT!IMPREF?
!IMPREF: preferred fw version: 02.24.05.06 preferred carrier name: ORANGE-EU preferred config name: ORANGE-EU_002.022_000 current fw version: 02.24.05.06 current carrier name: ORANGE-EU current config name: ORANGE-EU_002.022_000
OK AT!GOBIIMPREF?
!GOBIIMPREF: preferred fw version: 02.24.05.06 preferred carrier name: ORANGE-EU preferred config name: ORANGE-EU_002.022_000 current fw version: 02.24.05.06 current carrier name: ORANGE-EU current config name: ORANGE-EU_002.022_000
OK AT!USBSPEED?
ERROR AT!USBSPEED=?
ERROR AT!USBCOMP?
ERROR AT!USBCOMP=?
ERROR AT!USBVID?
ERROR AT!USBPID?
ERROR AT!USBPRODUCT?
ERROR AT!PRIID?
PRI Part Number: 9904336 Revision: 001.007 Customer: Dell
Carrier PRI: 9999999_9904597_SWI9X30C_02.24.05.06_00_ORANGE-EU_002.022_000
OK AT!SELRAT?
!SELRAT: 00, Automatic
OK AT!BAND?
Index, Name 00, All bands
OK AT!BAND=?
Index, Name 00, All bands 01, Europe 3G 02, North America 3G 06, Europe 07, North America 08, WCDMA ALL 09, LTE ALL
OK AT!PCINFO?
State: Online LPM voters - Temp:0, Volt:0, User:0, W_DISABLE:0, IMSWITCH:0, BIOS:0, LWM2M:0, OMADM:0, FOTA:0 LPM persistence - None
OK AT!PCOFFEN?
ERROR AT!CUSTOM?
!CUSTOM: GPSENABLE 0x04 GPSSEL 0x01 IPV6ENABLE 0x01 SIMLPM 0x01 USBSERIALENABLE 0x01
OK AT!IMAGE?
TYPE SLOT STATUS LRU FAILURES UNIQUE_ID BUILDID
FW 1 GOOD 1 0 0 ?? 02.24.03.00?
FW 2 GOOD 4 0 0 ?? 02.24.05.06?
FW 3 GOOD 3 0 0 ?? 02.33.03.00_?
FW 4 EMPTY 0 0 0
Max FW images: 4
Active FW image is at slot 2
TYPE SLOT STATUS LRU FAILURES UNIQUE_ID BUILD_ID PRI FF GOOD 0 0 0 002.072_000 02.33.03.00_GENERIC PRI FF GOOD 0 0 0 002.022_000 02.24.05.06_ORANGE-EU PRI FF GOOD 0 0 0 001.023_000 02.33.03.00_SIERRA PRI FF GOOD 0 0 0 001.001_000 02.24.03.00_VODAFONE Max PRI images: 50
OK AT
OK AT!IMAGE=0
OK AT!IMAGE?
TYPE SLOT STATUS LRU FAILURES UNIQUE_ID BUILD_ID
FW 1 EMPTY 0 0 0
FW 2 EMPTY 0 0 0
FW 3 EMPTY 0 0 0
FW 4 EMPTY 0 0 0
Max FW images: 4
Active FW image is at slot 255
TYPE SLOT STATUS LRU FAILURES UNIQUE_ID BUILD_ID Max PRI images: 50
OK cat: /dev/ttyUSB2: Nie ma takiego pliku ani katalogu cat: /dev/: Jest katalogiem cat: /dev/: Jest katalogiem cat: /dev/: Jest katalogiem AT
OK AT!ENTERCND="A710"
OK AT!USBCOMP=1,1,0000100D
OK AT!RESET
OK AT
OK ATE1
OK AT!IMPREF?
!IMPREF: preferred fw version: 02.24.05.06 preferred carrier name: ORANGE-EU preferred config name: ORANGE-EU_002.022_000 current fw version: 02.24.05.06 current carrier name: ORANGE-EU current config name: ORANGE-EU_002.022_000
OK AT!GOBIIMPREF?
!GOBIIMPREF: preferred fw version: 02.24.05.06 preferred carrier name: ORANGE-EU preferred config name: ORANGE-EU_002.022_000 current fw version: 02.24.05.06 current carrier name: ORANGE-EU current config name: ORANGE-EU_002.022_000
OK AT!USBSPEED?
ERROR AT!USBSPEED=?
ERROR AT!USBCOMP?
ERROR AT!USBCOMP=?
ERROR AT!USBVID?
ERROR AT!USBPID?
ERROR AT!USBPRODUCT?
ERROR AT!PRIID?
PRI Part Number: 9904336 Revision: 001.007 Customer: Dell
Carrier PRI: 9999999_9904597_SWI9X30C_02.24.05.06_00_ORANGE-EU_002.022_000
OK AT!SELRAT?
!SELRAT: 00, Automatic
OK AT!BAND?
Index, Name 00, All bands
OK AT!BAND=?
Index, Name 00, All bands 01, Europe 3G 02, North America 3G 06, Europe 07, North America 08, WCDMA ALL 09, LTE ALL
OK AT!PCINFO?
State: Online LPM voters - Temp:0, Volt:0, User:0, W_DISABLE:0, IMSWITCH:0, BIOS:0, LWM2M:0, OMADM:0, FOTA:0 LPM persistence - None
OK AT!PCOFFEN?
ERROR AT!CUSTOM?
!CUSTOM: GPSENABLE 0x04 GPSSEL 0x01 IPV6ENABLE 0x01 SIMLPM 0x01 USBSERIALENABLE 0x01
OK AT!IMAGE?
TYPE SLOT STATUS LRU FAILURES UNIQUE_ID BUILDID
FW 1 GOOD 1 0 0 ?? 02.24.05.06_?
FW 2 EMPTY 0 0 0
FW 3 EMPTY 0 0 0
FW 4 EMPTY 0 0 0
Max FW images: 4
Active FW image is at slot 1
TYPE SLOT STATUS LRU FAILURES UNIQUE_ID BUILD_ID PRI FF GOOD 0 0 0 002.072_000 02.33.03.00_GENERIC PRI FF GOOD 0 0 0 002.022_000 02.24.05.06_ORANGE-EU Max PRI images: 50
OK AT
OK AT!IMAGE=0
OK AT!IMAGE?
TYPE SLOT STATUS LRU FAILURES UNIQUE_ID BUILD_ID
FW 1 EMPTY 0 0 0
FW 2 EMPTY 0 0 0
FW 3 EMPTY 0 0 0
FW 4 EMPTY 0 0 0
Max FW images: 4
Active FW image is at slot 255
TYPE SLOT STATUS LRU FAILURES UNIQUE_ID BUILD_ID Max PRI images: 50
OK cat: /dev/ttyUSB2: Nie ma takiego pliku ani katalogu cat: /dev/: Jest katalogiem cat: /dev/: Jest katalogiem cat: /dev/: Jest katalogiem AT
OK AT!ENTERCND="A710"
OK AT!USBCOMP=1,1,0000100D
OK AT!RESET
OK AT
OK cat: /dev/ttyUSB2: Nie ma takiego pliku ani katalogu cat: /dev/: Jest katalogiem cat: /dev/: Jest katalogiem cat: /dev/: Jest katalogiem AT
OK AT!ENTERCND="A710"
OK AT!USBCOMP=1,1,0000100D
OK AT!RESET
OK cat: /dev/ttyUSB2: Nie ma takiego pliku ani katalogu cat: /dev/ttyUSB2: Nie ma takiego pliku ani katalogu cat: /dev/ttyUSB2: Nie ma takiego pliku ani katalogu cat: /dev/: Jest katalogiem cat: /dev/: Jest katalogiem cat: /dev/: Jest katalogiem AT
OK AT!ENTERCND="A710"
OK AT!USBCOMP=1,1,0000100D
OK AT!RESET
OK AT
OK ATE1
OK AT!GOBIIMPREF?
!GOBIIMPREF: preferred fw version: 02.24.05.06 preferred carrier name: ORANGE-EU preferred config name: ORANGE-EU_002.022_000 current fw version: 02.24.05.06 current carrier name: ORANGE-EU current config name: ORANGE-EU_002.022_000
OK AT!USBSPEED?
ERROR AT!USBSPEED=?
ERROR AT!USBCOMP?
ERROR AT!USBCOMP=?
ERROR AT!USBVID?
ERROR AT!USBPID?
ERROR AT!USBPRODUCT?
ERROR AT!PRIID?
PRI Part Number: 9904336 Revision: 001.007 Customer: Dell
Carrier PRI: 9999999_9904597_SWI9X30C_02.24.05.06_00_ORANGE-EU_002.022_000
OK AT!SELRAT?
!SELRAT: 00, Automatic
OK AT!BAND?
Index, Name 00, All bands
OK AT!BAND=?
Index, Name 00, All bands 01, Europe 3G 02, North America 3G 06, Europe 07, North America 08, WCDMA ALL 09, LTE ALL
OK AT!PCINFO?
State: Online LPM voters - Temp:0, Volt:0, User:0, W_DISABLE:0, IMSWITCH:0, BIOS:0, LWM2M:0, OMADM:0, FOTA:0 LPM persistence - None
OK AT!PCOFFEN?
ERROR AT!CUSTOM?
!CUSTOM: GPSENABLE 0x04 GPSSEL 0x01 IPV6ENABLE 0x01 SIMLPM 0x01 USBSERIALENABLE 0x01
OK AT!IMAGE?
TYPE SLOT STATUS LRU FAILURES UNIQUE_ID BUILDID
FW 1 GOOD 1 0 0 ?? 02.33.03.00?
FW 2 GOOD 2 0 0 ?? 02.24.05.06_?
FW 3 EMPTY 0 0 0
FW 4 EMPTY 0 0 0
Max FW images: 4
Active FW image is at slot 2
TYPE SLOT STATUS LRU FAILURES UNIQUE_ID BUILD_ID PRI FF GOOD 0 0 0 002.072_000 02.33.03.00_GENERIC PRI FF GOOD 0 0 0 002.022_000 02.24.05.06_ORANGE-EU PRI FF GOOD 0 0 0 001.023_000 02.33.03.00_SIERRA Max PRI images: 50
OK AT
OK AT!IMAGE=0
OK AT!IMAGE?
TYPE SLOT STATUS LRU FAILURES UNIQUE_ID BUILD_ID
FW 1 EMPTY 0 0 0
FW 2 EMPTY 0 0 0
FW 3 EMPTY 0 0 0
FW 4 EMPTY 0 0 0
Max FW images: 4
Active FW image is at slot 255
TYPE SLOT STATUS LRU FAILURES UNIQUE_ID BUILD_ID Max PRI images: 50
OK
i jeszcze logi z OPenwrt - kernel.log [ 0.000000] Linux version 5.4.179 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r16495-bf0c965af0)) #0 Wed Feb 16 20:29:10 2022 [ 0.000000] Board has DDR2 [ 0.000000] Analog PMU set to hw control [ 0.000000] Digital PMU set to hw control [ 0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6 [ 0.000000] printk: bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc) [ 0.000000] MIPS: machine is Zbtlink ZBT-WE826 (16M) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] Normal zone: 288 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=132768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480 [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2 [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] Writing ErrCtl register=00027e90 [ 0.000000] Readback ErrCtl register=00027e90 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 122408K/131072K available (5070K kernel code, 206K rwdata, 632K rodata, 1188K init, 213K bss, 8664K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] random: get_random_bytes called from 0x805c7a28 with crng_init=0 [ 0.000000] CPU Clock: 580MHz [ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns [ 0.000000] systick: enable autosleep mode [ 0.000000] systick: running - mult: 214748, shift: 32 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns [ 0.000011] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns [ 0.007622] Calibrating delay loop... 385.02 BogoMIPS (lpj=770048) [ 0.045503] pid_max: default: 32768 minimum: 301 [ 0.050197] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.057256] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.071687] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.081162] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.087852] pinctrl core: initialized pinctrl subsystem [ 0.094482] NET: Registered protocol family 16 [ 0.579713] mt7620-pci 10140000.pcie: PCIE0 no card, disable it(RST&CLK) [ 0.586215] mt7620-pci: probe of 10140000.pcie failed with error -1 [ 0.615032] rt2880_gpio 10000600.gpio: registering 24 gpios [ 0.620516] rt2880_gpio 10000600.gpio: registering 24 irq handlers [ 0.626874] rt2880_gpio 10000638.gpio: registering 16 gpios [ 0.632308] rt2880_gpio 10000638.gpio: registering 16 irq handlers [ 0.638666] rt2880_gpio 10000688.gpio: registering 1 gpios [ 0.644016] rt2880_gpio 10000688.gpio: registering 1 irq handlers [ 0.656056] clocksource: Switched to clocksource systick [ 0.662399] thermal_sys: Registered thermal governor 'step_wise' [ 0.662861] NET: Registered protocol family 2 [ 0.673074] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.681010] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.689166] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.696583] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.703416] TCP: Hash tables configured (established 1024 bind 1024) [ 0.709732] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.716094] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.723131] NET: Registered protocol family 1 [ 0.727369] PCI: CLS 0 bytes, default 32 [ 0.734326] rt-timer 10000100.timer: maximum frequency is 1220Hz [ 0.742528] workingset: timestamp_bits=14 max_order=15 bucket_order=1 [ 0.757517] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.763179] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.788581] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.798893] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.808218] printk: console [ttyS0] disabled [ 0.812393] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103 [ 0.822015] printk: console [ttyS0] enabled [ 0.830479] printk: bootconsole [early0] disabled [ 0.849597] spi spi0.0: force spi mode3 [ 0.863936] spi-nor spi0.0: w25q128 (16384 Kbytes) [ 0.868911] 4 fixed-partitions partitions found on MTD device spi0.0 [ 0.875405] Creating 4 MTD partitions on "spi0.0": [ 0.880320] 0x000000000000-0x000000030000 : "u-boot" [ 0.886582] 0x000000030000-0x000000040000 : "u-boot-env" [ 0.893222] 0x000000040000-0x000000050000 : "factory" [ 0.899588] 0x000000050000-0x000001000000 : "firmware" [ 0.910051] 2 uimage-fw partitions found on MTD device firmware [ 0.916167] Creating 2 MTD partitions on "firmware": [ 0.921263] 0x000000000000-0x0000001e6aad : "kernel" [ 0.927552] 0x0000001e6aad-0x000000fb0000 : "rootfs" [ 0.933765] mtd: device 5 (rootfs) set to be root filesystem [ 0.941865] 1 squashfs-split partitions found on MTD device rootfs [ 0.948268] 0x000000525000-0x000000fb0000 : "rootfs_data" [ 0.965885] gsw: setting port4 to ephy mode [ 0.970267] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 1 link up (100Mbps/Full duplex) [ 0.980192] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver [ 0.987005] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5 [ 0.996113] rt2880_wdt 10000120.watchdog: Initialized [ 1.003016] NET: Registered protocol family 10 [ 1.012325] Segment Routing with IPv6 [ 1.016278] NET: Registered protocol family 17 [ 1.020913] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.034155] 8021q: 802.1Q VLAN Support v1.8 [ 1.050590] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. [ 1.064649] Freeing unused kernel memory: 1188K [ 1.069303] This architecture does not have kernel memory protection. [ 1.075880] Run /sbin/init as init process [ 1.359999] random: fast init done [ 2.945024] init: Console is alive [ 2.948929] init: - watchdog - [ 5.516617] kmodloader: loading kernel modules from /etc/modules-boot.d/ [ 5.887851] usbcore: registered new interface driver usbfs [ 5.893643] usbcore: registered new interface driver hub [ 5.899227] usbcore: registered new device driver usb [ 5.911177] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.919719] ehci-fsl: Freescale EHCI Host controller driver [ 5.927020] ehci-platform: EHCI generic platform driver [ 5.942779] phy phy-usbphy.0: remote usb device wakeup disabled [ 5.948840] phy phy-usbphy.0: UTMI 16bit 30MHz [ 5.953386] ehci-platform 101c0000.ehci: EHCI Host Controller [ 5.959296] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1 [ 5.967537] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000 [ 5.978931] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00 [ 5.986420] hub 1-0:1.0: USB hub found [ 5.990798] hub 1-0:1.0: 1 port detected [ 6.000693] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 6.008365] ohci-platform: OHCI generic platform driver [ 6.014097] ohci-platform 101c1000.ohci: Generic Platform OHCI controller [ 6.021130] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2 [ 6.029364] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000 [ 6.061006] hub 2-0:1.0: USB hub found [ 6.065366] hub 2-0:1.0: 1 port detected [ 6.097871] kmodloader: done loading kernel modules from /etc/modules-boot.d/ [ 6.106597] init: - preinit - [ 6.244777] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 7.049180] hub 1-1:1.0: USB hub found [ 7.257442] hub 1-1:1.0: 4 ports detected [ 7.520782] random: procd: uninitialized urandom read (4 bytes read) [ 7.804592] usb 1-1.1: new high-speed USB device number 3 using ehci-platform [ 7.987874] usb 1-1.1: config 1 has an invalid interface number: 12 but max is 1 [ 7.995507] usb 1-1.1: config 1 has an invalid interface number: 13 but max is 1 [ 8.003074] usb 1-1.1: config 1 has an invalid interface number: 13 but max is 1 [ 8.010646] usb 1-1.1: config 1 has no interface number 0 [ 8.016174] usb 1-1.1: config 1 has no interface number 1 [ 8.024129] random: jshn: uninitialized urandom read (4 bytes read) [ 8.124755] random: jshn: uninitialized urandom read (4 bytes read) [ 8.530874] urandom_read: 2 callbacks suppressed [ 8.530884] random: jshn: uninitialized urandom read (4 bytes read) [ 8.593987] random: jshn: uninitialized urandom read (4 bytes read) [ 8.686660] random: jshn: uninitialized urandom read (4 bytes read) [ 9.021244] 8021q: adding VLAN 0 to HW filter on device eth0 [ 11.925237] jffs2: notice: (520) jffs2_build_xattr_subsystem: complete building xattr subsystem, 76 of xdatum (72 unchecked, 4 orphan) and 146 of xref (14 dead, 0 orphan) found. [ 11.955303] mount_root: switching to jffs2 overlay [ 11.970798] overlayfs: upper fs does not support tmpfile. [ 11.997497] urandom-seed: Seeding with /etc/urandom.seed [ 12.208233] procd: - early - [ 12.211404] procd: - watchdog - [ 12.973521] procd: - watchdog - [ 12.997905] procd: - ubus - [ 13.187425] random: ubusd: uninitialized urandom read (4 bytes read) [ 13.248075] random: ubusd: uninitialized urandom read (4 bytes read) [ 13.283494] procd: - init - [ 18.330653] urngd: jent-rng init failed, err: 2 [ 19.753928] kmodloader: loading kernel modules from /etc/modules.d/ [ 20.168404] usbcore: registered new interface driver cdc_wdm [ 20.192015] Loading modules backported from Linux version v5.10.85-0-ge4f2aee6612e [ 20.199827] Backport generated by backports.git v5.10.85-1-0-gf988973f [ 20.426231] usbcore: registered new interface driver usbserial_generic [ 20.433075] usbserial: USB Serial support registered for generic [ 20.481292] xt_time: kernel timezone is -0000 [ 20.542586] usbcore: registered new interface driver cdc_ncm [ 20.930277] PPP generic driver version 2.4.2 [ 20.955838] NET: Registered protocol family 24 [ 20.986014] usbcore: registered new interface driver qmi_wwan [ 21.011237] usbcore: registered new interface driver sierra [ 21.017130] usbserial: USB Serial support registered for Sierra USB modem [ 21.037429] usbcore: registered new interface driver sierra_net [ 21.092600] cdc_mbim 1-1.1:1.12: cdc-wdm0: USB WDM device [ 21.099416] cdc_mbim 1-1.1:1.12 wwan0: register 'cdc_mbim' at usb-101c0000.ehci-1.1, CDC MBIM, ee:78:d7:21:17:9d [ 21.110118] usbcore: registered new interface driver cdc_mbim [ 21.168798] usbcore: registered new interface driver qcserial [ 21.174854] usbserial: USB Serial support registered for Qualcomm USB modem [ 21.236383] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "factory" [ 21.243808] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 6352, rev 0500 detected [ 21.251761] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 7620 detected [ 21.258913] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 21.307019] kmodloader: done loading kernel modules from /etc/modules.d/* [ 29.551315] crng init done [ 47.167728] 8021q: adding VLAN 0 to HW filter on device eth0 [ 47.199741] br-lan: port 1(eth0.1) entered blocking state [ 47.205330] br-lan: port 1(eth0.1) entered disabled state [ 47.211314] device eth0.1 entered promiscuous mode [ 47.216244] device eth0 entered promiscuous mode [ 47.249825] br-lan: port 1(eth0.1) entered blocking state [ 47.255418] br-lan: port 1(eth0.1) entered forwarding state [ 48.179785] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 58.746463] ieee80211 phy0: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration start [ 58.755306] ieee80211 phy0: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration end [ 65.497436] ieee80211 phy0: rt2800_loft_iq_calibration: Info - LOFT Calibration Done! [ 66.010650] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Start! [ 66.031997] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Done! CH = 0, (gain= 3, phase=3d) [ 66.042239] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Start! [ 66.063561] ieee80211 phy0: rt2800_iq_search: Info - IQCalibration Done! CH = 1, (gain= 1, phase=3d) [ 66.072919] ieee80211 phy0: rt2800_loft_iq_calibration: Info - TX IQ Calibration Done! [ 66.582564] ieee80211 phy0: rt2800_rxiq_calibration: Warning - Wait MAC Status to MAX !!! [ 68.094642] ieee80211 phy0: rt2800_rxiq_calibration: Info - RXIQ G_imb=0, Ph_rx=0 [ 68.112575] ieee80211 phy0: rt2800_rxiq_calibration: Info - RXIQ G_imb=0, Ph_rx=2 [ 68.275039] br-lan: port 2(wlan0) entered blocking state [ 68.280557] br-lan: port 2(wlan0) entered disabled state [ 68.286463] device wlan0 entered promiscuous mode [ 69.055617] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 69.062417] br-lan: port 2(wlan0) entered blocking state [ 69.067903] br-lan: port 2(wlan0) entered forwarding state [ 83.172249] 8021q: adding VLAN 0 to HW filter on device wwan0
i system log
ue Mar 8 18:39:45 2022 kern.info kernel: [ 0.081162] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.087852] pinctrl core: initialized pinctrl subsystem
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.094482] NET: Registered protocol family 16
Tue Mar 8 18:39:45 2022 kern.err kernel: [ 0.579713] mt7620-pci 10140000.pcie: PCIE0 no card, disable it(RST&CLK)
Tue Mar 8 18:39:45 2022 kern.warn kernel: [ 0.586215] mt7620-pci: probe of 10140000.pcie failed with error -1
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.615032] rt2880_gpio 10000600.gpio: registering 24 gpios
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.620516] rt2880_gpio 10000600.gpio: registering 24 irq handlers
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.626874] rt2880_gpio 10000638.gpio: registering 16 gpios
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.632308] rt2880_gpio 10000638.gpio: registering 16 irq handlers
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.638666] rt2880_gpio 10000688.gpio: registering 1 gpios
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.644016] rt2880_gpio 10000688.gpio: registering 1 irq handlers
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.656056] clocksource: Switched to clocksource systick
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.662399] thermal_sys: Registered thermal governor 'step_wise'
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.662861] NET: Registered protocol family 2
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.673074] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.681010] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.689166] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.696583] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.703416] TCP: Hash tables configured (established 1024 bind 1024)
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.709732] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.716094] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.723131] NET: Registered protocol family 1
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.727369] PCI: CLS 0 bytes, default 32
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.734326] rt-timer 10000100.timer: maximum frequency is 1220Hz
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.742528] workingset: timestamp_bits=14 max_order=15 bucket_order=1
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.757517] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.763179] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.788581] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.798893] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.808218] printk: console [ttyS0] disabled
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.812393] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.822015] printk: console [ttyS0] enabled
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.830479] printk: bootconsole [early0] disabled
Tue Mar 8 18:39:45 2022 kern.warn kernel: [ 0.849597] spi spi0.0: force spi mode3
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.863936] spi-nor spi0.0: w25q128 (16384 Kbytes)
Tue Mar 8 18:39:45 2022 kern.notice kernel: [ 0.868911] 4 fixed-partitions partitions found on MTD device spi0.0
Tue Mar 8 18:39:45 2022 kern.notice kernel: [ 0.875405] Creating 4 MTD partitions on "spi0.0":
Tue Mar 8 18:39:45 2022 kern.notice kernel: [ 0.880320] 0x000000000000-0x000000030000 : "u-boot"
Tue Mar 8 18:39:45 2022 kern.notice kernel: [ 0.886582] 0x000000030000-0x000000040000 : "u-boot-env"
Tue Mar 8 18:39:45 2022 kern.notice kernel: [ 0.893222] 0x000000040000-0x000000050000 : "factory"
Tue Mar 8 18:39:45 2022 kern.notice kernel: [ 0.899588] 0x000000050000-0x000001000000 : "firmware"
Tue Mar 8 18:39:45 2022 kern.notice kernel: [ 0.910051] 2 uimage-fw partitions found on MTD device firmware
Tue Mar 8 18:39:45 2022 kern.notice kernel: [ 0.916167] Creating 2 MTD partitions on "firmware":
Tue Mar 8 18:39:45 2022 kern.notice kernel: [ 0.921263] 0x000000000000-0x0000001e6aad : "kernel"
Tue Mar 8 18:39:45 2022 kern.notice kernel: [ 0.927552] 0x0000001e6aad-0x000000fb0000 : "rootfs"
Tue Mar 8 18:39:45 2022 kern.notice kernel: [ 0.933765] mtd: device 5 (rootfs) set to be root filesystem
Tue Mar 8 18:39:45 2022 kern.notice kernel: [ 0.941865] 1 squashfs-split partitions found on MTD device rootfs
Tue Mar 8 18:39:45 2022 kern.notice kernel: [ 0.948268] 0x000000525000-0x000000fb0000 : "rootfs_data"
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.965885] gsw: setting port4 to ephy mode
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.970267] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 1 link up (100Mbps/Full duplex)
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.980192] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.987005] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 0.996113] rt2880_wdt 10000120.watchdog: Initialized
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 1.003016] NET: Registered protocol family 10
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 1.012325] Segment Routing with IPv6
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 1.016278] NET: Registered protocol family 17
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 1.020913] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 1.034155] 8021q: 802.1Q VLAN Support v1.8
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 1.050590] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 1.064649] Freeing unused kernel memory: 1188K
Tue Mar 8 18:39:45 2022 kern.warn kernel: [ 1.069303] This architecture does not have kernel memory protection.
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 1.075880] Run /sbin/init as init process
Tue Mar 8 18:39:45 2022 kern.notice kernel: [ 1.359999] random: fast init done
Tue Mar 8 18:39:45 2022 user.info kernel: [ 2.945024] init: Console is alive
Tue Mar 8 18:39:45 2022 user.info kernel: [ 2.948929] init: - watchdog -
Tue Mar 8 18:39:45 2022 user.info kernel: [ 5.516617] kmodloader: loading kernel modules from /etc/modules-boot.d/
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 5.887851] usbcore: registered new interface driver usbfs
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 5.893643] usbcore: registered new interface driver hub
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 5.899227] usbcore: registered new device driver usb
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 5.911177] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 5.919719] ehci-fsl: Freescale EHCI Host controller driver
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 5.927020] ehci-platform: EHCI generic platform driver
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 5.942779] phy phy-usbphy.0: remote usb device wakeup disabled
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 5.948840] phy phy-usbphy.0: UTMI 16bit 30MHz
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 5.953386] ehci-platform 101c0000.ehci: EHCI Host Controller
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 5.959296] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 5.967537] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 5.978931] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 5.986420] hub 1-0:1.0: USB hub found
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 5.990798] hub 1-0:1.0: 1 port detected
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 6.000693] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 6.008365] ohci-platform: OHCI generic platform driver
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 6.014097] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 6.021130] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 6.029364] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 6.061006] hub 2-0:1.0: USB hub found
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 6.065366] hub 2-0:1.0: 1 port detected
Tue Mar 8 18:39:45 2022 user.info kernel: [ 6.097871] kmodloader: done loading kernel modules from /etc/modules-boot.d/
Tue Mar 8 18:39:45 2022 user.info kernel: [ 6.106597] init: - preinit -
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 6.244777] usb 1-1: new high-speed USB device number 2 using ehci-platform
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 7.049180] hub 1-1:1.0: USB hub found
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 7.257442] hub 1-1:1.0: 4 ports detected
Tue Mar 8 18:39:45 2022 kern.notice kernel: [ 7.520782] random: procd: uninitialized urandom read (4 bytes read)
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 7.804592] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
Tue Mar 8 18:39:45 2022 kern.warn kernel: [ 7.987874] usb 1-1.1: config 1 has an invalid interface number: 12 but max is 1
Tue Mar 8 18:39:45 2022 kern.warn kernel: [ 7.995507] usb 1-1.1: config 1 has an invalid interface number: 13 but max is 1
Tue Mar 8 18:39:45 2022 kern.warn kernel: [ 8.003074] usb 1-1.1: config 1 has an invalid interface number: 13 but max is 1
Tue Mar 8 18:39:45 2022 kern.warn kernel: [ 8.010646] usb 1-1.1: config 1 has no interface number 0
Tue Mar 8 18:39:45 2022 kern.warn kernel: [ 8.016174] usb 1-1.1: config 1 has no interface number 1
Tue Mar 8 18:39:45 2022 kern.notice kernel: [ 8.024129] random: jshn: uninitialized urandom read (4 bytes read)
Tue Mar 8 18:39:45 2022 kern.notice kernel: [ 8.124755] random: jshn: uninitialized urandom read (4 bytes read)
Tue Mar 8 18:39:45 2022 kern.warn kernel: [ 8.530874] urandom_read: 2 callbacks suppressed
Tue Mar 8 18:39:45 2022 kern.notice kernel: [ 8.530884] random: jshn: uninitialized urandom read (4 bytes read)
Tue Mar 8 18:39:45 2022 kern.notice kernel: [ 8.593987] random: jshn: uninitialized urandom read (4 bytes read)
Tue Mar 8 18:39:45 2022 kern.notice kernel: [ 8.686660] random: jshn: uninitialized urandom read (4 bytes read)
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 9.021244] 8021q: adding VLAN 0 to HW filter on device eth0
Tue Mar 8 18:39:45 2022 kern.notice kernel: [ 11.925237] jffs2: notice: (520) jffs2_build_xattr_subsystem: complete building xattr subsystem, 76 of xdatum (72 unchecked, 4 orphan) and 146 of xref (14 dead, 0 orphan) found.
Tue Mar 8 18:39:45 2022 user.info kernel: [ 11.955303] mount_root: switching to jffs2 overlay
Tue Mar 8 18:39:45 2022 kern.warn kernel: [ 11.970798] overlayfs: upper fs does not support tmpfile.
Tue Mar 8 18:39:45 2022 user.warn kernel: [ 11.997497] urandom-seed: Seeding with /etc/urandom.seed
Tue Mar 8 18:39:45 2022 user.info kernel: [ 12.208233] procd: - early -
Tue Mar 8 18:39:45 2022 user.info kernel: [ 12.211404] procd: - watchdog -
Tue Mar 8 18:39:45 2022 user.info kernel: [ 12.973521] procd: - watchdog -
Tue Mar 8 18:39:45 2022 user.info kernel: [ 12.997905] procd: - ubus -
Tue Mar 8 18:39:45 2022 kern.notice kernel: [ 13.187425] random: ubusd: uninitialized urandom read (4 bytes read)
Tue Mar 8 18:39:45 2022 kern.notice kernel: [ 13.248075] random: ubusd: uninitialized urandom read (4 bytes read)
Tue Mar 8 18:39:45 2022 user.info kernel: [ 13.283494] procd: - init -
Tue Mar 8 18:39:45 2022 user.err kernel: [ 18.330653] urngd: jent-rng init failed, err: 2
Tue Mar 8 18:39:45 2022 user.info kernel: [ 19.753928] kmodloader: loading kernel modules from /etc/modules.d/
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 20.168404] usbcore: registered new interface driver cdc_wdm
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 20.192015] Loading modules backported from Linux version v5.10.85-0-ge4f2aee6612e
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 20.199827] Backport generated by backports.git v5.10.85-1-0-gf988973f
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 20.426231] usbcore: registered new interface driver usbserial_generic
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 20.433075] usbserial: USB Serial support registered for generic
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 20.481292] xt_time: kernel timezone is -0000
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 20.542586] usbcore: registered new interface driver cdc_ncm
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 20.930277] PPP generic driver version 2.4.2
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 20.955838] NET: Registered protocol family 24
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 20.986014] usbcore: registered new interface driver qmi_wwan
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 21.011237] usbcore: registered new interface driver sierra
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 21.017130] usbserial: USB Serial support registered for Sierra USB modem
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 21.037429] usbcore: registered new interface driver sierra_net
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 21.092600] cdc_mbim 1-1.1:1.12: cdc-wdm0: USB WDM device
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 21.099416] cdc_mbim 1-1.1:1.12 wwan0: register 'cdc_mbim' at usb-101c0000.ehci-1.1, CDC MBIM, ee:78:d7:21:17:9d
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 21.110118] usbcore: registered new interface driver cdc_mbim
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 21.168798] usbcore: registered new interface driver qcserial
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 21.174854] usbserial: USB Serial support registered for Qualcomm USB modem
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 21.236383] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "factory"
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 21.243808] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 6352, rev 0500 detected
Tue Mar 8 18:39:45 2022 kern.info kernel: [ 21.251761] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 7620 detected
Tue Mar 8 18:39:45 2022 kern.debug kernel: [ 21.258913] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Tue Mar 8 18:39:45 2022 user.info kernel: [ 21.307019] kmodloader: done loading kernel modules from /etc/modules.d/
Tue Mar 8 18:39:47 2022 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Tue Mar 8 18:39:47 2022 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Tue Mar 8 18:39:48 2022 daemon.info dnsmasq[1523]: Connected to system UBus
Tue Mar 8 18:39:48 2022 daemon.info dnsmasq[1523]: started, version 2.85 cachesize 150
Tue Mar 8 18:39:48 2022 daemon.info dnsmasq[1523]: DNS service limited to local subnets
Tue Mar 8 18:39:48 2022 daemon.info dnsmasq[1523]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Tue Mar 8 18:39:48 2022 daemon.info dnsmasq[1523]: UBus support enabled: connected to system bus
Tue Mar 8 18:39:48 2022 daemon.info dnsmasq[1523]: using only locally-known addresses for domain test
Tue Mar 8 18:39:48 2022 daemon.info dnsmasq[1523]: using only locally-known addresses for domain onion
Tue Mar 8 18:39:48 2022 daemon.info dnsmasq[1523]: using only locally-known addresses for domain localhost
Tue Mar 8 18:39:48 2022 daemon.info dnsmasq[1523]: using only locally-known addresses for domain local
Tue Mar 8 18:39:48 2022 daemon.info dnsmasq[1523]: using only locally-known addresses for domain invalid
Tue Mar 8 18:39:48 2022 daemon.info dnsmasq[1523]: using only locally-known addresses for domain bind
Tue Mar 8 18:39:48 2022 daemon.info dnsmasq[1523]: using nameserver 127.0.0.1#5054
Tue Mar 8 18:39:48 2022 daemon.info dnsmasq[1523]: using nameserver 127.0.0.1#5053
Tue Mar 8 18:39:48 2022 daemon.info dnsmasq[1523]: using nameserver 8.8.8.8#53 for domain pool.ntp.org
Tue Mar 8 18:39:48 2022 daemon.info dnsmasq[1523]: using nameserver 127.0.0.1#5353
Tue Mar 8 18:39:48 2022 daemon.info dnsmasq[1523]: using only locally-known addresses for domain lan
Tue Mar 8 18:39:48 2022 daemon.info dnsmasq[1523]: read /etc/hosts - 4 addresses
Tue Mar 8 18:39:48 2022 daemon.info dnsmasq[1523]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Tue Mar 8 18:39:50 2022 kern.notice kernel: [ 29.551315] crng init done
Tue Mar 8 18:39:57 2022 user.notice : Added device handler type: bonding
Tue Mar 8 18:39:57 2022 user.notice : Added device handler type: 8021ad
Tue Mar 8 18:39:57 2022 user.notice : Added device handler type: 8021q
Tue Mar 8 18:39:57 2022 user.notice : Added device handler type: macvlan
Tue Mar 8 18:39:57 2022 user.notice : Added device handler type: veth
Tue Mar 8 18:39:57 2022 user.notice : Added device handler type: bridge
Tue Mar 8 18:39:57 2022 user.notice : Added device handler type: Network device
Tue Mar 8 18:39:57 2022 user.notice : Added device handler type: tunnel
Tue Mar 8 18:39:59 2022 cron.err crond[1857]: crond (busybox 1.33.2) started, log level 5
Tue Mar 8 18:40:04 2022 daemon.notice wpa_supplicant[1678]: Successfully initialized wpa_supplicant
Tue Mar 8 18:40:04 2022 user.notice ModemManager: hotplug: error: modem not detected at sysfs path
Tue Mar 8 18:40:05 2022 daemon.err procd: failed to open pidfile for writing: : No such file or directory
Tue Mar 8 18:40:07 2022 user.notice https-dns-proxy: Starting service ✓✓
Tue Mar 8 18:40:08 2022 kern.info kernel: [ 47.167728] 8021q: adding VLAN 0 to HW filter on device eth0
Tue Mar 8 18:40:08 2022 kern.info kernel: [ 47.199741] br-lan: port 1(eth0.1) entered blocking state
Tue Mar 8 18:40:08 2022 kern.info kernel: [ 47.205330] br-lan: port 1(eth0.1) entered disabled state
Tue Mar 8 18:40:08 2022 kern.info kernel: [ 47.211314] device eth0.1 entered promiscuous mode
Tue Mar 8 18:40:08 2022 kern.info kernel: [ 47.216244] device eth0 entered promiscuous mode
Tue Mar 8 18:40:08 2022 kern.info kernel: [ 47.249825] br-lan: port 1(eth0.1) entered blocking state
Tue Mar 8 18:40:08 2022 kern.info kernel: [ 47.255418] br-lan: port 1(eth0.1) entered forwarding state
Tue Mar 8 18:40:08 2022 daemon.notice netifd: Interface 'lan' is enabled
Tue Mar 8 18:40:08 2022 daemon.notice netifd: Interface 'lan' is setting up now
Tue Mar 8 18:40:08 2022 daemon.notice netifd: Interface 'lan' is now up
Tue Mar 8 18:40:08 2022 daemon.notice netifd: bridge 'br-lan' link is up
Tue Mar 8 18:40:08 2022 daemon.notice netifd: Interface 'lan' has link connectivity
Tue Mar 8 18:40:08 2022 daemon.notice netifd: VLAN 'eth0.1' link is up
Tue Mar 8 18:40:08 2022 daemon.notice netifd: Interface 'monitoring' is enabled
Tue Mar 8 18:40:08 2022 daemon.notice netifd: Interface 'monitoring' is setting up now
Tue Mar 8 18:40:08 2022 daemon.notice netifd: Interface 'monitoring' is now up
Tue Mar 8 18:40:08 2022 daemon.notice netifd: 8021q 'monitoring' link is up
Tue Mar 8 18:40:08 2022 daemon.notice netifd: Interface 'monitoring' has link connectivity
Tue Mar 8 18:40:08 2022 daemon.notice netifd: Interface 'loopback' is enabled
Tue Mar 8 18:40:08 2022 daemon.notice netifd: Interface 'loopback' is setting up now
Tue Mar 8 18:40:08 2022 daemon.notice netifd: Interface 'loopback' is now up
Tue Mar 8 18:40:08 2022 daemon.notice netifd: Interface 'lte' is setting up now
Tue Mar 8 18:40:08 2022 daemon.notice netifd: Interface 'wan' is enabled
Tue Mar 8 18:40:08 2022 daemon.notice netifd: Interface 'wan6' is enabled
Tue Mar 8 18:40:08 2022 daemon.notice netifd: Network device 'eth0' link is up
Tue Mar 8 18:40:08 2022 daemon.notice netifd: Network device 'lo' link is up
Tue Mar 8 18:40:08 2022 daemon.notice netifd: Interface 'loopback' has link connectivity
Tue Mar 8 18:40:08 2022 daemon.notice netifd: VLAN 'eth0.2' link is up
Tue Mar 8 18:40:08 2022 daemon.notice netifd: Interface 'wan' has link connectivity
Tue Mar 8 18:40:08 2022 daemon.notice netifd: Interface 'wan' is setting up now
Tue Mar 8 18:40:08 2022 daemon.notice netifd: Interface 'wan6' has link connectivity
Tue Mar 8 18:40:08 2022 daemon.notice netifd: Interface 'wan6' is setting up now
Tue Mar 8 18:40:08 2022 user.notice ModemManager: hotplug: add network interface br-lan: event processed
Tue Mar 8 18:40:09 2022 user.notice ModemManager: hotplug: event reported: action=add, name=br-lan, subsystem=net
Tue Mar 8 18:40:09 2022 kern.info kernel: [ 48.179785] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Tue Mar 8 18:40:09 2022 user.notice ModemManager: hotplug: error: parent device sysfspath not found
Tue Mar 8 18:40:09 2022 daemon.err odhcpd[1795]: Failed to send to ff02::1%lan@br-lan (Address not available)
Tue Mar 8 18:40:09 2022 daemon.notice netifd: lte (2164): stopping network
Tue Mar 8 18:40:09 2022 user.notice ModemManager: hotplug: checking if ModemManager is available...
Tue Mar 8 18:40:09 2022 daemon.notice netifd: wan (2225): udhcpc: started, v1.33.2
Tue Mar 8 18:40:10 2022 user.notice ModemManager: hotplug: add network interface eth0.1: event processed
Tue Mar 8 18:40:11 2022 user.notice ModemManager: hotplug: event reported: action=add, name=eth0.1, subsystem=net
Tue Mar 8 18:40:11 2022 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Tue Mar 8 18:40:11 2022 user.notice ModemManager: hotplug: error: parent device sysfspath not found
Tue Mar 8 18:40:12 2022 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/dhcp
Tue Mar 8 18:40:12 2022 user.notice ModemManager: hotplug: add network interface monitoring: event processed
Tue Mar 8 18:40:12 2022 user.notice ModemManager: hotplug: event reported: action=add, name=monitoring, subsystem=net
Tue Mar 8 18:40:12 2022 daemon.notice netifd: wan (2225): udhcpc: sending discover
Tue Mar 8 18:40:12 2022 user.notice ucitrack: Setting up /etc/config/wireless reload dependency on /etc/config/network
Tue Mar 8 18:40:13 2022 user.notice ModemManager: hotplug: error: parent device sysfspath not found
Tue Mar 8 18:40:13 2022 daemon.notice netifd: Interface 'lte' is now down
Tue Mar 8 18:40:13 2022 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/luci-splash
Tue Mar 8 18:40:13 2022 user.notice ModemManager: hotplug: add network interface eth0.2: event processed
Tue Mar 8 18:40:13 2022 authpriv.info dropbear[2521]: Not backgrounding
Tue Mar 8 18:40:14 2022 user.notice firewall: Reloading firewall due to ifup of monitoring (monitoring)
Tue Mar 8 18:40:14 2022 user.notice ModemManager: hotplug: event reported: action=add, name=eth0.2, subsystem=net
Tue Mar 8 18:40:14 2022 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/qos
Tue Mar 8 18:40:14 2022 user.notice ModemManager: hotplug: error: parent device sysfspath not found
Tue Mar 8 18:40:14 2022 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/miniupnpd
Tue Mar 8 18:40:14 2022 daemon.err odhcp6c[2248]: Failed to send SOLICIT message to ff02::1:2 (Operation not permitted)
Tue Mar 8 18:40:15 2022 user.notice ModemManager: hotplug: remove network interface wlan0: event processed
Tue Mar 8 18:40:15 2022 user.notice ModemManager: hotplug: event reported: action=remove, name=wlan0, subsystem=net
Tue Mar 8 18:40:15 2022 user.notice ModemManager: hotplug: ModemManager not yet available
Tue Mar 8 18:40:15 2022 daemon.notice netifd: wan (2225): udhcpc: sending discover
Tue Mar 8 18:40:15 2022 user.notice ModemManager: hotplug: error: modem not detected at sysfs path
Tue Mar 8 18:40:16 2022 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/odhcpd
Tue Mar 8 18:40:16 2022 user.notice ModemManager: hotplug: checking if ModemManager is available...
Tue Mar 8 18:40:17 2022 user.notice ModemManager: hotplug: ModemManager not yet available
Tue Mar 8 18:40:17 2022 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Tue Mar 8 18:40:18 2022 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy0.conf (phy wlan0) --> new PHY
Tue Mar 8 18:40:18 2022 user.notice ModemManager: hotplug: checking if ModemManager is available...
Tue Mar 8 18:40:18 2022 user.notice ModemManager: hotplug: add network interface wlan0: event processed
Tue Mar 8 18:40:18 2022 user.notice ModemManager: hotplug: event reported: action=add, name=wlan0, subsystem=net
Tue Mar 8 18:40:18 2022 daemon.notice netifd: wan (2225): udhcpc: sending discover
Tue Mar 8 18:40:18 2022 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Tue Mar 8 18:40:18 2022 user.notice ModemManager: hotplug: ModemManager not yet available
Tue Mar 8 18:40:18 2022 user.notice ModemManager: hotplug: error: parent device sysfspath not found
Tue Mar 8 18:40:19 2022 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/luci_statistics
Tue Mar 8 18:40:19 2022 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/dhcp
Tue Mar 8 18:40:21 2022 kern.info kernel: [ 58.746463] ieee80211 phy0: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration start
Tue Mar 8 18:40:21 2022 kern.info kernel: [ 58.755306] ieee80211 phy0: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration end
Tue Mar 8 18:40:21 2022 user.notice ModemManager: hotplug: checking if ModemManager is available...
Tue Mar 8 18:40:21 2022 user.notice ModemManager: hotplug: error: modem not detected at sysfs path
Tue Mar 8 18:40:21 2022 user.notice ModemManager: hotplug: ModemManager not yet available
Tue Mar 8 18:40:23 2022 user.notice ModemManager: hotplug: checking if ModemManager is available...
Tue Mar 8 18:40:23 2022 daemon.info dnsmasq[1523]: exiting on receipt of SIGTERM
Tue Mar 8 18:40:23 2022 user.notice ModemManager: hotplug: ModemManager not yet available
Tue Mar 8 18:40:23 2022 daemon.notice procd: /etc/rc.d/S96led: setting up led wifi
Tue Mar 8 18:40:24 2022 user.notice ModemManager: hotplug: checking if ModemManager is available...
Tue Mar 8 18:40:24 2022 user.notice ModemManager: hotplug: ModemManager not yet available
Tue Mar 8 18:40:25 2022 daemon.info [2022]:
Napisałem konkretnie czego potrzebuje, specjalnie abym nie musiał wertować tysiąca stron. Czyli co.. mam sobie sam poszukać potrzebnych danych?
niestety nie jestem tutaj asem w tej dziedzinie podaj jakieś komendy jak to zrobić - to zbiorę Ci to do logicznej kupy
Przemek, ja tez nie znam polecen dla tego modemu i nie sa mi one do zycia potrzebne. A mowiac ze sie nie znasz idziesz na latwizne. Tematow z tym modemem jest w sieci od groma, a ja podalem konkretnie co mi jest potrzebne.
Podstawa podstaw to wynik polecenia: "cat /sys/kernel/debug/usb/devices"
Do tego musze znac port do komunikacji z modemem, gdzies mi sie rzucilo w oczy ze ktos z nim gadal przez "/dev/ttyUSB4" to tez do sprawdzenia.
śr., 9 mar 2022, 10:30 użytkownik przemekp1 @.***> napisał:
niestety nie jestem tutaj asem w tej dziedzinie podaj jakieś komendy jak to zrobić - to zbiorę Ci to do logicznej kupy
— Reply to this email directly, view it on GitHub https://github.com/4IceG/luci-app-modemband/issues/4#issuecomment-1062724368, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOIOFSJUONWZROJLFWKBNM3U7BVTLANCNFSM5QHVBVPA . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub.
You are receiving this because you commented.Message ID: @.***>
Cześć, może się przyda, ja korzystam z modelu EM7455 https://github.com/danielewood/sierra-wireless-modems, chyba, że chcesz abym wykonał jakieś komendy celem podania logów/parametrów tego modemu - to daj mi wytyczne. Pozdrawiam