search

5T33Z0 / OC-Little-Translated

ACPI Hotpatches and Guides for the OpenCore Bootmanager. Enhance and fine-tune your Hackintosh by adding devices and enabling additional features not covered in the OpenCore Install Guide. Only place that covers how to use OpenCore Legacy Patcher on PCs.
BSD 3-Clause "New" or "Revised" License
538 stars 71 forks source link

Amfipass kext doest work on my i3 ivybridge ventura 13.3.1 #77

Closed Rofocale11 closed 1 year ago

Rofocale11 commented 1 year ago

Its always hang/stall on the second boot, should i do post insall patches then to my plist. Add amfipass kext then delete amfi getout of my way and amfi=80 then reboot?

5T33Z0 commented 1 year ago

let me see your config, please.

Rofocale11 commented 1 year ago

https://drive.google.com/drive/folders/12ChcIvlh_kJybyTM3hrmj_sgJApXlLhh

5T33Z0 commented 1 year ago

Link requires access verification. Just paste the raw text of the config (without serials)

Rofocale11 commented 1 year ago

https://drive.google.com/drive/folders/12ChcIvlh_kJybyTM3hrmj_sgJApXlLhh

Perhaps u could checks this again

5T33Z0 commented 1 year ago

AMFIPass isn't in your kexts folder…

Rofocale11 commented 1 year ago

Yes sir, but when i add it to the plist then oc snapshot then delete amfi get out my way 1 reboot reset nvram then it doest boot just hang on the second stage of booting

Rofocale11 commented 1 year ago

And also like seems i cannot change the csr-active-config to 03080000 The result would be the same stall or bang on the second phase boot

5T33Z0 commented 1 year ago

Disable SecureBootModel And add AMFIPass or use AMFI=0x80

Rofocale11 commented 1 year ago

Alright ima try that realquick

Rofocale11 commented 1 year ago

Disable SecureBootModel

And add AMFIPass or use AMFI=0x80

It works now AMFI IS ENABLED AND CSR CONFIG 0x803 Thank you sm