[Feature Request] PETG Temp Tower

5axes / Calibration-Shapes

A Cura plugin that adds simple shapes (cube, cylinder, tube) and also 24 Calibration and test parts + 7 Postprocessing scripts

GNU Affero General Public License v3.0

340 stars 69 forks source link

[Feature Request] PETG Temp Tower #11

Closed hawkeyexp closed 3 years ago

hawkeyexp commented 3 years ago

Hi,

first to say: great plugin!!!

Would be nice if you can add more temp towers for different materials - but i think the big three pla / abs / petg is the most needed - so only petg is missing :-)

5axes commented 3 years ago

Updated in V1.0.8

userosos commented 3 years ago

I add the tower - part for calibration/PETg temp tower. Add chage g-code Tempfan tower. And it not work.

Untitled.zip

5axes commented 3 years ago

Looks like you set the wrong parameter in the script .. When we load your GCode. Temperature change are set every 3 steps.

As your settings for the layer Height are set to :

First layer height : 0.3
Layer height : 0.2

In this case settings must be :

And you should get these result :

userosos commented 3 years ago

I use default settings. I use material settings plugin also. May be it the error?

5axes commented 3 years ago

Ok that's normal you should not use the Fan option, that's why you have the same temperature on 3 level. Read the wiki concerning the script options

userosos commented 3 years ago

Ok that's normal you should not use the Fan option, that's why you have the same temperature on 3 level. Read the wiki concerning the script options

It works! Thx!

5axes commented 3 years ago

Updated in V1.0.8