search

5axes / Calibration-Shapes

A Cura plugin that adds simple shapes (cube, cylinder, tube) and also 24 Calibration and test parts + 7 Postprocessing scripts
GNU Affero General Public License v3.0
330 stars 69 forks source link

Modified G-Code not included... #21

Closed Benvolio28 closed 3 years ago

Benvolio28 commented 3 years ago

Hi! Love the tools, however for the temperature tower, the modified G-Code is not part of the project. The temp just stays the same as my cura settings. I'm on an Ender 3 V2 (running the Smith 3D software), with Cura 4.8.0.

I have installed the plug in I have added the modified G-Code to Cura I have restarted Cura.

Thanks for your help, and thank you for the plugin!

5axes commented 3 years ago

There is no modified G-code in this plugin. I don't really understand what kind of issue you are talking about ?

Benvolio28 commented 3 years ago

With the temp tower, it does not alter the temp for each step. It stays at the temp set in my cura settings. So, I usually print pla at 200... So, it's always 200. No variance.

Thanks for your reply.

On Mon, Mar 22, 2021, 3:21 AM 5axes @.***> wrote:

There is no modified G-code in this plugin. I don't really understand what kind of issue you are talking about ?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/5axes/Calibration-Shapes/issues/21#issuecomment-803825539, or unsubscribe https://github.com/notifications/unsubscribe-auth/ATK5G5Y6YGOYHHQ466N4443TE3VXBANCNFSM4ZSCIPPA .

5axes commented 3 years ago

did you add the TempFan postprocessing script and configure it ?

https://www.youtube.com/watch?v=6LjbCIGCmd0

Benvolio28 commented 3 years ago

So sorry it took me a bit to get back to you... work got in the way. Yes, I did add the TempFan script and configure it

5axes commented 3 years ago

Ok i haven't correctly read your first message. I don't know what is this "Smith 3D software" the script are designed for a Marlin compatible printer. Could be the origine of your issue ?

XAMCTBO commented 3 years ago

guy`s I have totally same issue like guy who create subject. Cura 4.8 adding this plugin, restart cura, adding modifyed G code setting up layers and start temp, push slice -> send to octoprint - temperature not changing.... changeatZ working just fine....

Octopi updated cura connected to octoprint(latest) marlin edited for bltouch and filament runout sensor

5axes commented 3 years ago

Whitout news .. don't need to keep it open