oTXRX: ol_tx_classify: remove the peer reference ec9c6000

[Harishrelysys]

Hi, I am using 8devices wifi evaluation module with my custom board. I want wifi in access point mode I am able to connect to it but I am getting continues log in debug port as bellow.

O.S - yocto (linux) kernal=4.4.138 architecture=arm processor=Renesas(RZG1E)

error:

usb 1-1.6: new high-speed USB device number 4 using ehci-pci hif_usb_probe Enter:hif_usb_disable_lpm,Line:127 hif_usb_disable_lpm: LPM isn't enabled Exit:hif_usb_disable_lpm,Line:154 BCDDevice : 300 RX Bulk Ep:0x81 maxpktsz:512 athusb: alloc resources lpipe:4 hpipe:0xC0408480 urbs:32 RX Bulk Ep:0x82 maxpktsz:512 athusb: alloc resources lpipe:5 hpipe:0xC0410480 urbs:32 RX Bulk Ep:0x83 maxpktsz:512 athusb: alloc resources lpipe:6 hpipe:0xC0418480 urbs:32 RX Bulk Ep:0x84 maxpktsz:512 athusb: alloc resources lpipe:7 hpipe:0xC0420480 urbs:32 TX Bulk Ep:0x01 maxpktsz:512 athusb: alloc resources lpipe:0 hpipe:0xC0008400 urbs:32 TX Bulk Ep:0x02 maxpktsz:512 athusb: alloc resources lpipe:1 hpipe:0xC0010400 urbs:32 TX Bulk Ep:0x03 maxpktsz:512 athusb: alloc resources lpipe:2 hpipe:0xC0018400 urbs:32 TX Bulk Ep:0x04 maxpktsz:512 athusb: alloc resources lpipe:3 hpipe:0xC0020400 urbs:32 /proc/cld/athdiagpfs created wlan: [54:E :HDD] wlan_hdd_cfg80211_init: wiphy->bands[i] is NULL, i = 2 wlan: [54:E :VOS] vos_lock_init: already initialized lock NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0 Board extended Data download address: 0x0 wlan: [54:E :VOS] ol_transfer_bin_file: transferring file: fakeboar.bin size 8124 bytes done! ol_download_firmware: Using 0x1234 for the remainder of init wlan: [54:E :VOS] ol_transfer_bin_file: transferring file: otp.bin size 24037 bytes done! ol_transfer_bin_file: Loading setup file athsetup.bin usb 1-1.6: Direct firmware load for athsetup.bin failed with error -2 ol_transfer_bin_file: Failed to get athsetup.bin wlan: [54:E :VOS] ol_transfer_bin_file: transferring file: athwlan.bin size 591880 bytes done! +HTCCreate .. HIF :ee9e7400 -HTCCreate (0xedd21800) WDA_open-4688: WMA --> wmi_unified_attach - success ol_if_dfs_attach: called; ptr=ed041a9c, radar_info=ef1af934 wlan: [54:E :SAP] dfs_init_radar_filters[201]: Unknown dfs domain 0 +HWT Target Ready! : transmit resources : 3 size:1792, MaxMsgsPerHTCBundle = 8 HTC Service Index : 1 TX : 0x100 : alloc:3 HTC Service:0x0001, ULpipe:0 DLpipe:5 id:0 Ready -HWT is_full_reorder_offloaded? 0 HTC Service TX : 0x300 : allocation is zero! HTC Service:0x0300, ULpipe:1 DLpipe:5 id:1 Ready HTC Service:0x0300 ep:1 TX flow control disabled HTC Service TX : 0x301 : allocation is zero! Target failed service 0x301 connect request (status:1) TX HTT OFF, ep -1 size 0 htt_tx_attach:htt_desc_start:0xec960000 htt_desc_end:0xec97c200 HTC Service:0x0100, ULpipe:0 DLpipe:5 id:2 Ready HTC Service:0x0100 ep:2 TX flow control disabled wma_pre_start-5056: WMA --> wmi_unified_connect_htc_service - success wma_mc_process_msg-21967: McThread: WNI_CFG_DNLD_REQ HTC will not use TX credit flow control __wmi_control_rx: WMI UNIFIED SERVICE READY event wma_rx_service_ready_event-24799: WMA <-- WMI_SERVICE_READY_EVENTID wlan: [1198:E :WDA] wma_rx_service_ready_event: Firmware build version : 00000029 wlan: [1198:E :WDA] wma_rx_service_ready_event: Board version: 0.21014003 wma_rx_service_ready_event-24914: WMA --> WMI_INIT_CMDID __wmi_control_rx: WMI UNIFIED READY event wma_rx_ready_event-24943: WMA <-- WMI_READY_EVENTID wlan: [54:E :VOS] error: wiphy->bands is NULL, i = 2 wlan: [54:F :HDD] pAdapter is null !! wlan: [54:E :HDD] AP country Code FFF wlan: [54:E :SME] csr_init_chan_list: 326: init time country code 00 usb 1-1.6: Direct firmware load for wlan/usb_wlan_mac.bin failed with error -2 wlan: [54:E :WDA] MCC TX Pause Event Handler register wlan: [54:E :WDA] Target does not support batch scan feature Enter:usb_hif_start_recv_pipes,Line:958 Post URBs to RX_DATA_PIPE: 32 Exit:usb_hif_start_recv_pipes,Line:994 session id - 0, AddSta session - 0 wlan: [1695:E :WDA] wma_unified_vdev_create_send: ID = 0 VAP Addr = c4:93:00:0f:c2:a1 target uses HTT version 3.27; host uses 3.23 *** Warning: host/target HTT versions are different, though compatible! wma_vdev_attach-5905: vdev_id 0, txrx_vdev_handle = ee85fc00 athusb : usb bulk transmit failed -12 athusb send failed 18 HIFSend Failed status:18 HTCIssuePackets, failed pkt:0xedd8b780 status:18 wlan: [1695:E :SME] No Pending command waiting wlan: [54:E :HDD] wlan_hdd_tdls_init TDLS Implicit trigger not enabled! session id - 1, AddSta session - 0 wlan: [1695:E :WDA] Invalid wda_cli_set pdev command/Not yet implemented 0x34 wlan: [1695:E :WDA] wma_unified_vdev_create_send: ID = 1 VAP Addr = c6:93:00:90:c2:a1 wma_vdev_attach-5905: vdev_id 1, txrx_vdev_handle = eea08a00 wma_vdev_attach-5971: P2P Device: creating self peer c6:93:00:90:c2:a1, vdev_id 1 wlan: [1695:E :WDA] wma_create_peer: Created peer with peer_addr c6:93:00:90:c2:a1 vdev_id 1, peer_count - 1 wlan: [1695:E :SME] No Pending command waiting Host SW:4.5.20.037, FW:0.0.0.41, HW:QCA9377_REV1_1 wlan_logging_sock_activate_svc: Initalizing FEConsoleLog = 0 NumBuff = 32 wlan_logging_sock_activate_svc: Activated wlan_logging svc wlan: [54:E :HDD] hdd_wlan_startup: 12529: set tsf GPIO failed athusb : usb bulk transmit failed -12 athusb send failed 18 HIFSend Failed status:18 HTCIssuePackets, failed pkt:0xee99ec00 status:18 wlan: [1695:E :WDA] Invalid wda_cli_set pdev command/Not yet implemented 0x34 wlan: [1695:E :WDA] TM sending the following to firmware: min 0 max 110 enable 1 wlan: [1695:E :WDA] TM Sending thermal mgmt cmd: low temp 0, upper temp 110, enabled 1 athusb : usb bulk transmit failed -12 athusb send failed 18 HIFSend Failed status:18 HTCIssuePackets, failed pkt:0xec9ca680 status:18 athusb : usb bulk transmit failed -12 athusb send failed 18 HIFSend Failed status:18 HTCIssuePackets, failed pkt:0xec9ca680 status:18 athusb : usb bulk transmit failed -12 athusb send failed 18 HIFSend Failed status:18 HTCIssuePackets, failed pkt:0xec9ca680 status:18 wlan: [1334:E :HDD] wlan_hdd_get_classAstats: Unable to retrieve Class A statistics wma_vdev_detach-5270: P2P Device: removing self peer c6:93:00:90:c2:a1 TXRX: ol_txrx_peer_detach:peer ef292000 (c6:93:00:90:c2:a1) wlan: [1695:E :WDA] wma_remove_peer: Removed peer with peer_addr c6:93:00:90:c2:a1 vdevid 1 peer_count 0 athusb : usb bulk transmit failed -12 athusb send failed 18 HIFSend Failed status:18 HTCIssuePackets, failed pkt:0xec9ca680 status:18 athusb : usb bulk transmit failed -12 athusb send failed 18 HIFSend Failed status:18 HTCIssuePackets, failed pkt:0xec9ca680 status:18 athusb : usb bulk transmit failed -12 athusb send failed 18 HIFSend Failed status:18 HTCIssuePackets, failed pkt:0xec9ca680 status:18 wma_vdev_detach-5319: vdev_id:1 vdev_hdl:eea08a00 wlan: [0:E :WDA] Call txrx detach with callback for vdev 1 wlan: [1695:E :SME] No Pending command waiting wma_vdev_detach-5319: vdev_id:0 vdev_hdl:ee85fc00 wlan: [0:E :WDA] Call txrx detach with callback for vdev 0 wlan: [1695:E :SME] No Pending command waiting wlan: [1695:E :VOS] vos_mem_zero called with NULL parameter ptr wlan: [1695:E :WDA] Set software AP Auth offload with none support security type

athusb : usb bulk transmit failed -12 athusb send failed 18 HIFSend Failed status:18 HTCIssuePackets, failed pkt:0xec9ca680 status:18 wlan: [1334:F :HDD] wlan_hdd_cfg80211_get_txpower: Not in station context wlan: [1342:E :HDD] hdd_hostapd_ioctl: 389: ifr or ifr->ifr_data is NULL wlan: [1342:E :HDD] hdd_hostapd_ioctl: 389: ifr or ifr->ifr_data is NUL wlan: [1342:E :HDD] hdd_hostapd_ioctl: 389: ifr or ifr->ifr_data is NULL Starting hostapd server wlan: [1737:F :HDD] wlan_hdd_cfg80211_get_txpower: Not in station context wlan: [1737:F :HDD] wlan_hdd_cfg80211_get_txpower: Not in station context wlan: [1737:F :HDD] wlan_hdd_cfg80211_get_txpower: Not in station context wlan: [1737:F :HDD] wlan_hdd_cfg80211_get_txpower: Not in station context session id - 0, AddSta session - 0 wlan: [1695:E :WDA] wma_unified_vdev_create_send: ID = 0 VAP Addr = c4:93:00:0f:c2:a1 wma_vdev_attach-5905: vdev_id 0, txrx_vdev_handle = eea01a00 wlan: [1695:E :SME] Active list command waiting wlan: [1695:E :PE ] limMlmAddBss: 1724: TRYING TO HIDE SSID 0 wlan: [1695:E :PE ] mlm_add_sta: 1621: GF: 0, ChnlWidth: 0, MimoPS: 0, lsigTXOP: 0, dsssCCK: 0, SGI20: 0, SGI400 wlan: [1695:E :WDA] wma_create_peer: Created peer with peer_addr c4:93:00:0f:c2:a1 vdev_id 0, peer_count - 1 wlan: [1695:E :HDD] MODE 1, CH 6, LWM 0, HWM 0, TXQDEP 1500 wlan: [1695:E :HDD] wlan(0) 00:00:00:00:00:00 Standalone wlan: [1695:E :HDD] AP(6) c4:93:00:0f:c2:a1 wlan: [1695:E :SME] No Pending command waiting wma_set_bsskey-13518: BSS Key setup with vdev_mac c4:93:00:0f:c2:a1

wlan: [1695:E :SME] No Pending command waiting TXRX: ol_txrx_peer_find_add_id: Delete Peer ef142000 TXRX: Couldn't find peer from ID 7 - skipping security inits root@rt-falcon:~# wlan: [1342:E :HDD] hdd_hostapd_ioctl: 389: ifr or ifr->ifr_data is NULL TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000 TXRX: ol_tx_classify: remove the peer reference ef142000

[Nevinskas]

It seems that something wrong with the USB itself. Can you try different USB cable and different USB port? Is there enough power from the USB? Are you using any hubs between host and Bean?

[Harishrelysys]

Hi Nevinskas, Thanks for quick reply.We tried with different usb cables and the different port as well ,we are seeing the same issue.We have seen the same behavior with hub and without hub.

[valinskas]

No activity over the year, closed issue.