search

8devices / qcacld-2.0

Drivers for BLUE bean and RED bean modules
8 stars 13 forks source link

usb 2-1: Direct firmware load for athsetup.bin failed with error -2 qcacld driver 2.0 #6

Closed ranusha14 closed 5 years ago

ranusha14 commented 5 years ago

I have cross compiled qcacld driver and obtained wlan-usb.ko file but when i load the driver in device, i am getting error. The driver is ported using yocto build. errors : 1) ol_transfer_bin_file: Loading setup file athsetup.bin usb 2-1: Direct firmware load for athsetup.bin failed with error -2 ol_transfer_bin_file: Failed to get athsetup.bin 2) wlan: [1887:E :HDD] hdd_hostapd_SAPEventCB: 1228: ERROR: HDD Failed to find sta id!!

root@rt-falcon:~# wlan_usb: loading driver v4.5.20.037

ol_transfer_bin_file: Loading setup file athsetup.bin usb 2-1: Direct firmware load for athsetup.bin failed with error -2 ol_transfer_bin_file: Failed to get athsetup.bin wlan: [1884:E :VOS] ol_transfer_bin_file: transferring file: athwlan.bin size 591880 bytes done! +HTCCreate .. HIF :e9e1e400 -HTCCreate (0xef1a9800) WDA_open-4688: WMA --> wmi_unified_attach - success ol_if_dfs_attach: called; ptr=e9e6da9c, radar_info=e9e8da6c wlan: [1884:E :SAP] dfs_init_radar_filters[201]: Unknown dfs domain 0 +HWT Target Ready! : transmit resources : 3 size:1792, MaxMsgsPerHTCBundle = 8 HTC Service Index : 1 TX : 0x100 : alloc:3 HTC Service:0x0001, ULpipe:0 DLpipe:5 id:0 Ready -HWT is_full_reorder_offloaded? 0 HTC Service TX : 0x300 : allocation is zero! HTC Service:0x0300, ULpipe:1 DLpipe:5 id:1 Ready HTC Service:0x0300 ep:1 TX flow control disabled HTC Service TX : 0x301 : allocation is zero! Target failed service 0x301 connect request (status:1) TX HTT OFF, ep -1 size 0 htt_tx_attach:htt_desc_start:0xe8a40000 htt_desc_end:0xe8a5c200 HTC Service:0x0100, ULpipe:0 DLpipe:5 id:2 Ready HTC Service:0x0100 ep:2 TX flow control disabled wma_pre_start-5056: WMA --> wmi_unified_connect_htc_service - success wma_mc_process_msg-21967: McThread: WNI_CFG_DNLD_REQ HTC will not use TX credit flow control __wmi_control_rx: WMI UNIFIED SERVICE READY event wma_rx_service_ready_event-24799: WMA <-- WMI_SERVICE_READY_EVENTID wlan: [54:E :WDA] wma_rx_service_ready_event: Firmware build version : 00000029 wlan: [54:E :WDA] wma_rx_service_ready_event: Board version: 0.21014003

wlan: [1887:E :SME] No Pending command waiting wlan: [1887:E :HDD] hdd_hostapd_SAPEventCB: 1228: ERROR: HDD Failed to find sta id!! wlan: [1887:E :PE ] __limProcessSmeDisassocCnf: 2899: received DISASSOC_CNF for a STA that does not have context, addr= 30:10:b3:5f:2f:07 TXRX: Deleting peer e9ed3000 (30:10:b3:5f:2f:07) wlan: [1887:E :PE ] limProcessAssocReqFrame: 661: RSN enabled auth, Re/Assoc req from STA: 30:10:b3:5f:2f:07

terrycmchan commented 5 years ago

Hi ranusha14,

Have you fixed this issue? I am also facing this problem. Would you mind give me some suggestions?

Thanks!

Nevinskas commented 5 years ago

1) athsetup.bin file is not necessary. It should work without it.

2) Could you provide full log of commands after the error:

dmesg
ps aux
ranusha14 commented 5 years ago

Hi terrycmchan, Download the athsetup.bin file from the below given link and compile it..

ranusha14 commented 5 years ago

Hi Nevinskas, yes it works fine even without athsetup.bin file but still i saw the error in dmesg so i thought to solve it .