Problem with _documentation/consumer/dragonboard/dragonboard845c/installation/board-recovery.md

[rbmistry]

Please enter some details about the bug/issue so we can promptly resolve it. URL: https://www.96boards.org/documentation/consumer/dragonboard/dragonboard845c/installation/board-recovery.md.html

The instructions to put the device into EDL mode do not seem to work. This is what worked on my test bench:

• Set the switch "DIP_SW" to "0 1 1 0 0 0" (Turn on SW2 on the dip switch to enable the USB2.0 debug port Turn on SW3 on the Dip Switch to enable the auto power up on USB-C cable connection)

• Power off the board and make sure the USB type-C cable is not plugged into the board

• Press button 18 (e.g. marked with F_DL), and

• Connect the USB3 Type C (5) between the Linux PC and the board

[fixxxxxxer]

@rbmistry when we have time to test this, we will narrow down this guide; however, until then, we have included your observations as an option during this board-recovery process. If users are not able to satisfy their needs with the previous guide, your option will follow. This fix can be found in the following PR:

https://github.com/96boards/documentation/pull/846