-
Hello
I remaked an issue with new DVB-T Sticks with an RTL28xx.
I had no Issues with my old DVB-T Stick. ince it's used 24h/24h to catch tfa sensors, I bought a new one: Same model, same brand.
…
-
### Background
The majority of aircraft currently do not transmit their position information, and rely on ground stations to triangulate them. This is a problem for in-aircraft displays like paradar,…
-
Lo primero que hice fue buscar en Google "_decoding 1090Mhz_". Pinché en el primer resultado, **_decoding 1090 Mhz riddle_** y leyendo esa guía, en el enlace basics, encontré una cadena de texto muy s…
-
@adsbxchange You mentioned MLAT accuracy being effected by time settings which yes is true. Anything I can do to help out here with the script that you can think of? I have noticed a few jagged tracks…
-
Currently can't upgrade bordercontrol until this issue is resolved, or we backport readsb into the current version.
-
- System: ubuntu-focal (5.4.0-109-generic)
- rocm-5.2.1
- GPU: MI250X
I am trying to set the memory clock frequency using `rocm-smi`, and it fails with the `RSMI_STATUS_PERMISSION` error. The p…
-
Hi I have installed my adsb antenna on my roof top and its a two storey building with 10ft height. I cannot able to detect the flights which are landing in airstrip since I'm located close to it . I c…
-
While there is scaffolding up for the roof work, John C is planning to install a LoRaWAN gateway on the roof (and has permission from the landlord).
I'm wondering if we should put an AIS antenna up…
-
Description: I would like to request the inclusion of a logarithmic scale option for bar graphs in Grafana. Currently, Grafana provides a logarithmic scale option for line graphs, but not for bar grap…
-
In areas with low UAT traffic, the data stream `dump978 (raw) -> uat2esnt -> readsb` will disconnect when there's no traffic after a while. This is causing a lot of connects / disconnects that are vi…