-
Hi,
I'm experimenting with the the following modules:
[t-watch s3](https://www.lilygo.cc/products/t-watch-s3?_pos=15&_sid=68efe9dd5&_ss=r) (433MHz)
[LoRa32 V2.1_1.6](https://www.lilygo.cc/products/…
-
### The problem
Just after upgrading from Core 2024.9.2 to Core 2024.10.1 values from Telldus Live integration with local device TellStick ZNet Lite v2 stopped. Not all Tellstick device values a miss…
-
I see that RTL supports a Cardin S466-TX2. I know it's a different protocol than the Cardin s500. I try to read the signal so I can send it out and integrate it with MQTT, but I do not get any signal …
-
New to this but can't get it right there's something I'm missing, very simple device just a doorbell.
433MHz
[https://github.com/kimballen/rtl_433-Recorded-Signals/tree/main/GN%20Resound%20-%…
-
Will other type of receivers and transmitters work?
In my country we don’t have access to WL-102-341 modules.
-
there are some 433mh led remote controls. Is there a way to use them.
so you can have longer range
-
Hi,
I'm wondering if I could also also use the ESPSomfy for detecting/controlling other devices for complete different purposes, such as an ELRO AB440 remote or an ELRO plug etc. (of course using a …
-
Recording RF (433MHz) signals is okay. They are saved to the SD card without any problem.
When trying to transmit the signals, it does nothing. I analyzed the spectrum with other stickCplus2 and wh…
-
Hello,
is it possible to add this card to shutters controled by Broadlink (433mhz)? If so, how can I do it?
I have all my shutthers as entities but I got this result... (the ones at the top are w…
-
Hello,
This is an excellent project and perfectly documented :)
I'm very excited to try to replicate what you have accomplished!
My main doubt is regarding the **433Mhz Receiver board** that I sho…
afeno updated
7 years ago