-
**What new integration would you wish to have?**
Would it be able to add RF Transceiver 868MHz CC1101?
*If possible, provide a link to an existing library for the integration:**
https://github.…
-
Is is possible to use the 868mhz versions of the CC1101 with this library?
-
TX: Tandem X20s
SO TX: Ethos 1.5.11 FLEX
RX : R9 Slim + 868Mhz
SO Rx: 1.3.1
Controller: Matek F405 WIN
SO Controller: Arduplane V.4.0.8
On Open TX all work, include receiving telemetry data.…
-
**Describe the problem you have/What new integration you would like**
It seems to me there is no support for a 868 MHz tranceiver to receive and emit custom signals.
**Please describe your u…
-
Hello,
Very impressed about the project.
I’ve seen it can be used to up to 900mhz but in practice can i measure the impedance at 868mhz?
-
Hi I installed tinyGS to my Heltec lora32 v3 board sx1262 lora radio but with 868MHz
I configuration there is no option for 868MHz only 433MHz
![Screenshot_20240415-122906](https://github.com/G4lile…
-
Hello.
I have got a CC1101 868 Mhz and a nodemcuv2. wired them accordingly the readme
Last 2 days i have been trying to sniff some PIR sensors (868mhz) with no success.
at this point i dont e…
-
When receiving 868MHZ, how to block 433.92MHZ and how to set it? After the remote controllers of 433.92 and 868MHZ are sent, 868MHZ is received normally, and it is impossible to determine which freque…
-
Hi Theo, i've come across your repo.
Just a question regarding the hardware you recommend.
You recommend a lora 868mhz esp32, but the ts-ft002 is sending via 433mhz. is the esp the correct one or …
-
### Type of request
Question
### OS version
Ubuntu
### wmbusmeters version
1.16.1-29-g1a4169e
### Your message goes here
Hello,
Veolia change my watermater with :
-CYBLE G3-ITR
868MHZ
Birdz…