-
with new firmware of the AC300 there is the charging current adjustable from Bluetti app - ist it possible to implement tis feature into Bluetti MQTT ?
roesl updated
1 month ago
-
This is just a placeholder for my notes:
- 3002 is the new "Grid Self-adaption" toggle
- 3019 is the new "Max Charging Current of Grid" setting
Both can be set like normal fields.
I ran a fu…
-
Will I need one ESP per device or can I connect two AC300 devices with the same ESP?
-
I updated my AC300 from 9014.10 to 9014.12 because the bluetooth connection was not that stable. Using the newest version with NimBLE library was ok but i was hoping the firmwareupdate at the bluetti …
-
Hi Mario,
I made "some" fixes (page chunk concatenation) and stripped the code down for my needs aso.
The code is here:
https://github.com/tinkercnc/Bluetti_AC300_ESP32
Further infos follows...…
-
Hello,
Iam running a B230 connected to a AC200M.
Turning both off via mqtt from HA works fine, but when turning on the AC200M via solar input - the B230 remains turned off.
I read that the AC30…
-
in HA with mqtt auto discovery i have a bluetti device with nearly no sensors and i have a lot of sensors without device.
It would be nice to have all sensors belonging to bluetti device after discov…
-
I uploaded the code to my ESP32 and received no data. I found a work-around and I thought I'd post it. I separated the polling request into smaller chunks and it started working! Thanks so much for…
-
I don't know why it took me so long to realize this, but the command/response API is just [MODBUS](https://modbus.org/docs/Modbus_Application_Protocol_V1_1b3.pdf) over Bluetooth (and MODBUS over MQTT …
-
Hi there,
Awesome work so far on all the protocol reverse-engineering - going to be nice to actually have the ability to track charge level metrics and PV output over time.
Had a quick question …