-
This may be related to the 2 payload formats supported by the device
- S370 = 0 : Format Legacy (Demonstrator)
- S370 = 1 : Format Field Test Device
Looking at the [Adeunis Payload docs](http…
-
Hi,
I'm new using LoRa.
I got one LoRa mkrwan 1300 and i'm wondering if i can use it as a gateway just to read data from end devices.
Best regards,
Merlin Pineda
-
### Question
We have some lwm2m devices using standard IoTerop SDK which are sending a response to a READ using SenML with a timestamp value inside (timestamp from SenML specification).
Leshan s…
-
HI ,
iam facing some issue while validating the code .
"Error: Command failed: bin/validate-image ./vendor/adeunis/tic.png
'bin' is not recognized as an internal or external command,
operable…
-
#### Summary
Steps to reproduce:
git clone https://github.com/TheThingsNetwork/lorawan-devices.git
make deps
make validate
...
#### What do you see now?
netvox: r718wb: AU915-928: profi…
-
**Describe the bug**
When ADR is enabled, the LNS sends LINK_ADR_REQ after 20 uplinks, and the device responds with LINK_ADR_ANS. However, this exchange continues indefinitely because CHANNEL_MASK_AC…
lytzV updated
2 years ago
-
I have this dry contact sensor - https://www.adeunis.com/en/produit/dry-contacts-0-1-status/. And we have installed them in 6 different substation.
All 6 sensors have 4 unique channels. Channel 1 an…
-
1. Are you using Helium hosted Console or running your own open source Console?
We are using a private console hosted by Helium.
2. If you are on Helium hosted Console, which url are you currently…
-
When sending a command from cumulocity to a device attaced to TTN with a codec enless wireless, the messages seems to not been sent to TTN
An exception is raised, see logs: TTN-exception-send-command…
phcrb updated
3 years ago
-
Some users experience latency issues using Helium-hosted Router/Console and/or cell-based gateways. The default RX_DELAY of 1 second might be too tight. If a user could configure RX_DELAY, this would …