-
Moin Herr @hbitter .
Soweit ich gesehen habe, stellen Sie freundlicher Weise die Platinendaten zur Verfügung, aber eine Möglichkeit diese fertig (unbestückt) zu beziehen ist leider nicht vorhanden.…
-
I have an issue while flashing, the tool says "Timed out waiting for packet content" after the connection to the ESP8266 chip was established. The CH340 driver under Win10 is properly installed, the C…
-
Hello,
I'm encountering an issue using my DNMS T4.0+NodeMCU1.4 PCB. The PCB is connected to a DNMS, a SPS30 and a BME280. While the BME280 is working fine I only get values either for the SPS30 or …
-
This morning I noticed that my sensor didn't send data anymore to madavi. I could see it was still connected to the wifi/router but I couldn't connected to its IP.
When I used the serial monitor to…
-
I'm designing a PCB to be screwed on to the SDS011 sensor with a Wemos D1 mini on the backside and connectors for the sensor.
I've also added connectors for some I2C and a DHT so far but are there an…
-
The sensor SDS011 delivered incorrect measured values. The new sensor now shows this behavior after less than a year. The picture of the measured values shows the behavior best. Every day for a certai…
-
Values on https://api-rrd.madavi.de/grafana/d/BYsfp-xGz/dnms?var-chipID=esp8266-9757414&orgId=1 are way off. On the Sensors Web interface everything looks good:
```
GET r: 200
output debug text t…
-
FlashTool: airRohr-firmware-flasher-0.3.4-Windows_amd64_BETA
Binary: latest-de (NRZ-2020-133/DE)
WIFI: local wifi in 1m distance to antenna using 2,4 GHz guest wifi (named GST) without any passwort
…
-
Hi,
not sure if this is the right place. I try anway.
I build a setup with Airrohr and Teensy 4.o according to the manaula on this page.
The Airrohr works great. The DNMS also with the USB te…
-
Is it make sense to support stereo microphone?
If yes then how to do it the best way? On the single PCB or using 2 microphone paired cases?