-
Hello,
In the aoscx_upload_firmware module, that wait_firmware_upload option is not documented.
https://github.com/aruba/aoscx-ansible-role/blob/master/docs/aoscx_upload_firmware.md
```
chan…
-
Trying to set a new untagged vlan on a tagged port:
Hardware: CX6300, running 10.13.xxxx
Base config:
show runn int 1/1/10
interface 1/1/10
no shutdown
no routing
…
-
Hi,
tested with latest aoscx collection version and latest pyaoscx:
- arubanetworks.aoscx 4.4.0
- pyaoscx 2.6.0 AOS-CX Python Modules
```
- name: Add ACL tas…
git4m updated
3 months ago
-
Hello,
I updated the arubanetworks.aoscx collection to 4.3.1.
I got an error "fatal: [aoscx_1]: FAILED! => {"changed": false, "msg": "Network resources: \"PARAMETER ERROR: Wrong module name. L…
-
Hi,
I'm using the ``aoscx.aoscx_vlan_interface`` module to configure multiple IPv4s + Active Gateway IPs on a CX-10000 device.
### Situation:
This snippet is run in a loop for each vlan inter…
-
Hey,
in the **aoscx_backup_config** module there is an option to specify the config_name to backup, yet it always returns the **running-config**.
Collection:
```arubanetworks.aoscx …
-
### Environment
* Python version: 3.6.8
* Nautobot version: 1.2.7
### Steps to Reproduce
1. Add Aruba CX driver to NAPALM drivers (https://github.com/napalm-automation-community/napalm-aruba-cx)…
-
Issue while using the Certified collection "arubanetworks-aoscx" with the module "aoscx_command" and "aoscx_config"
While running a single task, two SSH connection requests are send. - One is corre…
-
I have stept on a problem with role: aoscx_vlan_interface, i can create ip_helper_address when i create a new interface but if I run the playbook again with no changes i get an error:
"module_stder…
-
I have found an issue where the aoscx_acl_vlan module renames the VLAN. For example, show running config before running a playbook:
```
vlan 164
name Dev-A
vsx-sync
```
Run the playboo…