-
### Description of the issue
Since upgrading to 1.39.0-1 I cannot access Zigbee2MQTT's frontend, getting "502: Bad Gateway" instead. Other addon frontends are accessible via ingress. There's nothin…
-
### What happened?
Aqara ZNJLBL01LM don´t show position anymore
### What did you expect to happen?
until one of the lasts updates, the position was shown from 0 - 100%
### How to reproduce it (m…
-
### The problem
Hi,
My Home assistant is configured to use Celsius unit. But after every restart It goes back to Fahrenheit unit.
The devices concerned are :
**MQTT**
- Temperature and humi…
-
### What happened?
I'm moving from Zigbee-HA to Zigbee2MQTT.
In Zigbee-HA, my Motion-Sensor Aqara RTCGQ11LM has a "no_motion" state. I think this state is similar to "no_occupancy_since" in Zigbee2…
-
When pressing the call button in aqara app it is shown OK in the app but no sound from the doorbell speaker. Can it be caused by your firmware? Is there any way to roll everything back to stock?
-
I've enabled telnet on my EU m2 hub and set up environment. I see it is connected via telnet and MQTT
![image](https://github.com/niceboygithub/AqaraGateway/assets/3011471/96f9b1cb-2542-49f8-9686-624…
-
Hi everyone,
I spend much time trying to configure Aqara Double wall switch.
Now i have left button as switch for my light that works well, but i can't configure the right button as statelessProgram…
-
### What happened?
I have an Aqara ZNCLDJ14LM cover motor and I'm receiving these errors:
> Payload is not supported (e.g. open, closed, opening, closing, stopped): stop
### What did you expect t…
-
### Link
https://www.aqara.com/en/product/smart-door-lock-a100-zigbee
### Database entry
"definition":null,"friendly_name":"0x54ef4410004c5112","ieee_address":"0x54ef4410004c5112","status":"s…
-
As this repo is no longer being maintained for anyone interested see my fork with additional Aqara, Battery and MQTT Command Support here: [Fork](https://github.com/oskarn97/xiaomi-zb2mqtt)