-
Fix in #4013 revealed a problem. Needs investigation and a backwards compatible fix.
```haskell
alonzo/AlonzoUtxowPredFailure: FAIL
*** Failed! (after 6 t…
-
Hi
I unable to get the usb 3.0 gigabyte ethernet dongle to work or being detected with opnsense over my raspberry pi 4b.
May i know what usb 3.0 gigabyte ethernet chipset or any brand that can…
-
As this is just a git mirror of the official Asix driver, I want to leave a note here that I've fixed several bugs in my fork: https://github.com/ntonnaett/asix-usb-nic-linux-driver
Before, this dr…
-
I started noticing this when I was putting more stuff info mint.cnf, namely:
- usb `loader.prg`
- gluestik.prg
- `ifconfig` & `route` commands
When I put those three lines for the first time, it…
-
Hi
I have USB Ethernet adapter and i wondered will it be possible to add its driver to iPXE image in order to boot of a USB drive and PXE boot via the USB Ethernet
the driver is for ASIX
http…
gadd1 updated
7 years ago
-
Hi Aloksinha,
Thx for your work and putting this online.
I'm currently using the pre-compiled kernel from this repo (picuntu 4.5), compiled the asix driver against the source, but it fails to load. w…
-
```
What steps will reproduce the problem?
1. Using an external Asix AX88772B USB-ETHERNET Adapter with a WLXKJ652 NAS (as
described in Issue 11 to overcome Samba / FTP file transfer instability).
…
-
I am looking for a solution to switch the power of usb port and found this wonderful tool!
I have none of usb hub in the supported list, so I tested this on the hub I have, [I-O DATA US3C-UERGB/H2]…
-
According to [this post](https://forums.raspberrypi.com/viewtopic.php?t=367748) it worked prior to 6.6, but it doesn't now.
Steps:
* Pi5, fully updated from Lite (64-bit of course)
* Plug in the AS…
-
I think asix ax88179 driver for 918+ ,3622 not working.
I hope it'll be fixed someday!