-
### Discussed in https://github.com/SpenceKonde/megaTinyCore/discussions/1129
Originally posted by **magoldsm** July 18, 2024
In the attached code, I make continuous calls to analogWrite. Aft…
-
I know this issue has been raised for different devices, but I feel in my case I have a different condition.
I am using a Raspberry Pi and a FT232R USB UART adapter. The Tiny does not have the UPDI p…
-
I'm working with an Attiny404 and was setting up PWM which requires writing to 16bit registers.
I was getting unexpected results when setting the PER and CMP1 registers (both 16bit).
I had code …
-
Normally fuse bits are defined like
```
#define FUSE_SOMETHING (unsigned char)~_BV(some_n)
```
For the list of parts below gcc v12 defines a lot of them *without bit inversion* `~`
```
atmega1…
-
Did you delete your python script from this repo? Does this layout/wiring work? I'm thinking of using this for programming an Attiny on my Raspberry Pi connected PCB.
-
**These are the old requirements, for reference only. Please see the following posts for current state of affairs.**
Please create a separate branch, such as "bat_pcb" for this design.
The batte…
-
@fauxpark has done a ton of work already. Here is what is left to consider.
- [x] 1. Shrink and align the boxes
- [x] 2. Move obsolete symbols to /obsolete
- [x] 3. Make sure all non-obsolete sym…
-
Right now we're calling `form` and `rustfmt` to split out the auto-generated modules into many files. I don't think this provides much value as nobody is going to look at those file anyway.
I have…
Rahix updated
5 months ago
-
I am experiencing an accuracy problem with all of the MegaTinyCore devices I have tested (ATtiny 402, 1614, 1616, 414, 32xx
). This appears to be a core issue, as the same sketch and hardware works p…
-
### Describe the problem
The Arduino language features are not available after startup.
### To reproduce
- Have no attached boards,
- Start IDE2,
- Select `Arduino Uno` board (can be any),…