-
hello everyone
i'd like to share some info and schematics for this "new" pcb/kit
it will not work correctly with existed hw because of shared pins for S1/RM and S2/GM, i cut button's wires and sol…
-
Hi,
The [component list](https://prunkdump.github.io/GNUVario-TTGO-T5-website-EN/materiel/composants.html) says that I should use lilygo t5 with epaper display GDEW029M06 from Good Display.
Will…
-
While talking with friends, Simone Diamanti discovers that Banggood uses a jQuery ajax call.
The message says if the product is in stock or not.
-
Hi there,
looks like their might be a new hardware revision from banggod again (or I am doing something wrong).
The clock mostly worked with the original firmware, but was flickery.
Flashing th…
-
Feature request for support for ESP32 C3 SuperMini
https://banggood.com/ESP32-C3-Development-Board-ESP32-SuperMini-WiFi-Bluetooth-Mini-Module-p-1997449.html
-
I have a C17 airplane from Banggood (the same is also sold by FliteTest as the FT Freighter, so I added that for searchability) which has a XNS1042CV in the controller. It is the only chip and the ant…
-
With AdafruitPowerBoost set to False, the script enters an infinite loop when the battery gets low.
A workaround until I fix this is to set batteryGPIO to None. This will disable the low battery al…
-
I connected DS18B20 sensor with pullup resisters, and after updating /boot/config with dtoverlay=w1-gpio, I cant see anything in dmesg
XX@octopi:~ $ dmesg | grep gpio
[ 1.477648] gpiomem-bcm283…
-
There might be duplicated items in the feed.xml that is being uploaded.
- Check the feed.xml (banggood) for duplicated items.
-
Originally reported by: **Carmelo (Bitbucket: [Carmelo66](https://bitbucket.org/Carmelo66), GitHub: [Carmelo66](https://github.com/Carmelo66))**
----------------------------------------
Good morning…