-
Hello there, i was trying to design my own pcb board for brushless motors control based on stm32, and i was wondering if i can use a already made firmware like BLHeli32, but i dont find and cant uplou…
-
### Description
I see that [bluepills cpu definitions](https://github.com/renode/renode/blob/master/platforms/cpus/stm32f103.repl) don't include CAN like [STM32F4 does](https://github.com/renode/re…
-
I've recently bought two different lots of bluepills that don't work with this bootloader but they work fine with the STM32duino-bootloader, and user space USB works too.
The chips are marked as STM3…
f3sty updated
19 hours ago
-
@Hello,
I am trying to get this to work on a standard bluepill board without success.
Getting "Timeout: No data received from target" Error
What I tried so far:
-Using the precompiled firmware…
-
Hello,
My blue pill contains a chip of stm32F103c6t6.
I am using STM32 core by STMicroelectronics (Arduino IDE).
I followed all the processes of installing this HID bootloader. But when I connect t…
-
i flashed the bluepill with freejoy and read config from device which gave me 4 button gnd and 4 axis when i connected my limit switch to the board the button in button config section is showing green…
-
hello terje i build firmware via STM32 bluepill web builder, i have connected EStop or Reset, Cycle Start, and Feed Hold to ground but grbl firmware can't be run on openbuilds, ugs, and io sender, las…
-
![NO-GND](https://github.com/STM32-base/STM32-base/assets/8660811/837b1c99-4ac4-48f0-af6b-63df064d610d)
https://stm32-base.org/assets/pdf/boards/original-schematic-STM32F103C8T6-Blue_Pill.pdf
…
-
I try to use the ISD17260 with your library ISD1700.h on a BluePill/STM32F103: it seems it doesn't work. I previously use it on an ATMega2560 board and it worked correctly. Did you test this library …
-
I use the USB to TTL adpatper and follow the instuctions to flash the boatloader, but cant find other more info to flash the hex files to the board, there is no instrutions on the github, and since Lo…