-
Missing check fixed in #75575 must be backported.
-
My PR #17099 is for a new binding to monitor and control Hunter Douglas Generation 3 shades via Bluetooth Low Energy. This binding has different behaviour depending on whether the shade has been inte…
-
In lines 836 to 837...
```
(UUID(0x2A4D), F_READ_NOTIFY, ((UUID(0x2908), F_READ),)),
(UUID(0x2A4D), F_READ_WRITE, ((UUID(0x2908), F_READ),)),
```
...the d…
-
Our sister project for Windows, [MagicPods](https://github.com/steam3d/MagicPodsCore), has reverse engineered reading and writing data to AirPods.
* The good news is that this actually works and I …
-
The Bluetooth host stack doesn't implement enough error handling.
A lot of parameter and state checking happens using `__ASSERT()` macros.
This is a good thing, as it reduces the mental load of pa…
-
### Question
Today I've tried to setup a WiFi-Zigbee bridge. For this a ESP32-C6 would serve as a Zigbee Coordinator, which would also be able to receive commands via WiFi e.g. for changing the light…
-
I'm following the build instructions [here](https://github.com/micropython/micropython/discussions/10234) to build the standard unix variant on MacOS with the Nimble Bluetooth stack enabled. I have an…
-
**Describe the bug**
After successfully connecting and bonding with a BLE device using RxAndroidBle, subsequent connections experience significant delays, particularly during MTU requests and charact…
-
I saw in the ESP-Hosted FG document that the Bluetooth stack for MCU will be released in the future, when will it be released?
I wanted to adapt the ESP-Hosted FG to the STM32H750, but I couldn't fin…
-
## Introduction
Bluetooth Mesh is a complex component that consumes a significant amount of memory and CPU time. It is currently built as a semi-monolithic subsystem on top of HCI, and must be link…