-
Due to the weight of current power delivery solutions a smaller more lightweight power source is needed. The target is to use one single lightweight Lithium Polymer cell that provides a nominal voltag…
-
Hey, very cool project!
Recently I also thought about a wind turbine MPPT, but I considered a buck converter (battery at low voltage side, wind turbine at higher voltage side) as most suitable DC/D…
-
Hi, thanks a lot for this great project, but I can see where I could check which are the connections (where and how) that you have make to the boost dc converter board.
Are you using arduino's pwm …
-
### Link
https://www.aliexpress.com/item/1005007412184036.html
### Database entry
{"id":40,"type":"EndDevice","ieeeAddr":"0xa4c138e61f406c8e","nwkAddr":27112,"manufId":4417,"manufName":"_TZE2…
-
What was VSYS with a boost converter chosen over using the PMID output of the BQ25895? I haven't played with the chip yet and I'm trying to figure out why this might be the case. The only reason I c…
-
Hello,
I got same French valves by Thaleos-Connect, I have following definition :
```js
const definition = {
zigbeeModel: ['TS0601'],
model: 'TS0601',
vendor: '_TZE200_rv6iuyxb',
…
-
I wanted to try out the KiCad schematic capture, so I made a little boost converter, which gives me a Netlist like this:
```
L1 L1-Pad1 D1-Pad2 1
D1 C1-Pad1 D1-Pad2 D
M1 D1-Pad2 M1-Pad2 0 0 nmos
…
-
### Issue summary
JTy-[43%] Linking cXX executable caffe
/usr/bin/ld: ../lib/libcaffe.so.1.0.0: undefined reference to boost::python::throw_error_already_set()'/usr/bin/ld: ../lib/libcaffe.so.1.0.0…
-
### Description of Issue
USD provides default Boost.Python converters for built-in types. This tends to cause confusion among developers because modules they are authoring may appear to work or fail …
-
I did mostly the same, but glued to a 2xAA holder for 3.3V or a 4xAA holder for 5V.
This coupled with some [super small boost converters](https://aliexpress.com/item/1005006438496545.html), along w…